Analysis of FGM Cylindrical Shell under Impact Loading of Explosion

Subject Areas : composite materials

reza  azarafza ¹ (Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran)
puya  pirali ² (Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran)
Ali  Javadi ³ (Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran)

Received: 2022-09-09 Accepted : 2023-02-21 Published : 2023-06-01

Keywords: dynamic loading, FGM shell, Explosion, Cylindrical shell,

Abstract :

Due to the increasing application of Functionally Graded Materials (FGM) shells, it seems necessary to investigate their behaviour under different loads. Therefore, in this paper, the dynamic response of functionally graded materials cylindrical shells under explosive load has been investigated with analytical and simulation methods. LS-DYNA software is used in the simulation method. In analytical solution, vibration of composite circular cylindrical shells is investigated based on the first-order deformation shell theory. The boundary conditions are assumed to be fully simply supported. The dynamic response of composite shells is studied under blast loading. The modal technique is used to develop the analytical solution of composite shell. The solution for the shell under the giving loading condition can be found using the convolution integral. Material properties are assumed to be graded in the thickness direction according to Reddy function. A FGM cylindrical shell is made up of a mixture of ceramic and metal. Results show that the effect of explosion is such that it has the greatest effect on the inner layer and with increasing thickness to the outside of the shell this effect decreases and when the maximum deflection occurs, the dynamic velocity is zero. Also, it was observed that with increasing length, the radial deflection increases due to increasing the distance from the support to the center of the shell.

References:

• Nosier, A., Reddy, J. N., Study of Non-Linear Dynamic Equations of Higher-Order Shear Deformation Plate Theories, International Journal of Non-Linear Mechanics, Vol. 26, No. 2, 1991, pp. 233-249, Doi.org/10.1016/0020-7462(91)90054-W.


• Jafari, A. A., Khalili, S.M.R., and Azarafza, R., Transient Dynamic Response of Composite Circular Cylindrical Shells Under Radial Impulse Load and Axial Compressive Loads, Thin-Walled Structures, Vol. 43, 2005, pp. 1763-1786, DOI:10.1016/j.tws.2005.06.009.


• Dashtian Gerami, N., Khodarahmi, H., and Khazraeian, N., Fracture of Cylindrical Grooves in The Middle of a Groove Due to Cost Explosion, 13th Annual Conference on Mechanical Engineering, Isfahan, Isfahan University of Technology, 2005 (In Persian).


• Azarafza, R., Khalili, S. M. R., Jafari, A. A., and Davar, A., Analysis and Optimization of Laminated Composite Circular Cylindrical Shell Subjected to Compressive Axial and Transverse Transient Dynamic Loads, Thin-Walled Structures, Vol. 47, 2005, PP. 970-983, DOI: 10.1016/j.tws.2009.01.004.


• Wange, E., Gardner, N., and Shukla, A., The Blast Resistance of Sandwich Composites with Stepwise Graded Cores, International Journal of Solids and Structures, Vol. 46, 2009, No. 18-19, pp. 3492-3502, DOI.org/10.1016/j.ijsolstr.2009.06.004.


• Hause, T., Advanced Functionally Graded Plate-Type Structures Impacted by Blast Loading, International Journal of Impact Engineering, Vol. 38, No. 5, 2011, pp. 314-321, DOI.org/10.1016/j.ijimpeng.2010.11.006.


• Aksoylar, C., Omercikoglu, A., Mecitoglu, Z., and Omurtag, M. H., Nonlinear Transient Analysis of FGM and FML Plate Under Blast Loads by Experimental and Mixed FE Methods, Composite structure, Vol. 94, No. 2, 2012, pp. 731–744, DOI.org/10.1016/j.compstruct.2011.09.008.


• Kashani, M., Peyman, S., Numerical Analysis of the Explosion Effect of a Cylindrical Charge on Armor Made of Functional Material (Aluminum Nitride- Aluminum), 8th National Congress of Civil Engineering, Faculty of Civil Engineering, Babol, May, 2014, (In Persian), COI: AEBSCONF02_188.


• Kashani, M., Peyman, S., Investigation of Functional Plate Behavior (Silinium-Steel) under the Explosion of Cylindrical Explosion Pressure”, 8th National Congress of Civil Engineering, Faculty of Civil Engineering, Babol, May, 2014, (In Persian).


• Banks-Sills, L., Eliasi, R., and Berlin Y., Modeling of Functionally Graded Material in Dynamic Analysis, Composites Part B: Engineering, Vol. 33, No. 1, 2002, pp. 7-15, 2002, DOI.org/10.1016/S1359-8368(01)00057-9.


• Mahmoudi Darani, S., and Aghagol, A., Numerical Simulation of Explosions in Cylindrical Tanks Using Euler-Lagrange Simultaneous Technique, 12th National Conference on Manufacturing Engineering of Iran, Tehran, Iranian Society of Manufacturing Engineering, Tehran, Faculty of Engineering, 2011, (In Persian).


• Azarafza, R., Weight and Dynamic Optimization of Multilayer Composite Cylindrical Structures, Ph.D. Dissertation, Mechanical Engineering Dept., K.N.T. University, September, 2005.


• Taghavi Parsa, M. H., Peyman, S., Analysis of the Effect of Buried Explosive Loading on Underground Reinforced Concrete Structures, Amirkabir Journal of Civil Engineering, Vol. 51, No. 1, 2019, pp. 3-18, DOI: 10.22060/ceej.2018.12858.5288.