Numerical simulation of turbulent flow around an airfoil with blunt trailing edge aerodynamic characteristics modification of this airfoil with base and aerodynamic cavity
Subject Areas : Mechanical Engineering
H
Sayadi
1
()
a.r.
shateri
2
()
Keywords:
Abstract :
This paper is a computational study of the behavior of aerodynamics characteristics of an airfoil with blunt trailing edge and studies the effects aerodynamic performance caused by modifications made to the trailing edge. Blunt trailing edge airfoils are of interest in the engineering of large wind turbine blades because they allow for a strong structure with a high aerodynamic lift to structural weight ratio. Blunt trailing edge airfoils would not only provide a number of structural benefits, such as decreased structural volume and ease of fabrication and handling, but they have also been found to improve the lift characteristics of thick airfoils. the incorporation of blunt trailing edge airfoils would allow blade designers to more freely address the structural demands without having to sacrifice aerodynamic performance. These airfoils do have the disadvantage of generating high levels of drag as a result of the low-pressure steady or periodic flow in the near-wake of the blunt trailing edge. Also vortex shedding in this airfoils, induces fluctuating loads and radiated noise. In the present investigation, we tested the effects of two cavities on the base drag and wake of an airfoil with blunt trailing edge. In two-dimensional subsonic flows, any method that increases the base pressure of the airfoil with blunt trailing edge consequently reduces the base drag. When the cavity is introduced to the trailing edge, the base pressure increases. Also the cavity caused trapping and stabilizing the vortex