Ultrasonic Assisted Drilling of Bone

Subject Areas : Mechanical Engineering

Vahid Khademi ¹ ()
Javad Akbari ² ()
Farzam Farahmand ³ ()

Received: 2011-01-09 Accepted : 2017-10-31 Published : 2008-09-01

Keywords:

Abstract :

Ultrasonic Assisted Drilling (USD) is new technique to drill difficult to machine materials. In this method, tool or workpiece vibrates with amplitude of few microns in addition to conventional drill bite rotation. In this experimental research, the bone was drilled both conventionally and using UAD, then the thrust was measured in two methods at feed rates of 50, 75 and 125 mm/s and 500, 710 and 1000 RPMs. The results show that USD method causes the thrust force decreases considerably in compare whit conventional drilling. The maximum temperature is less in USD at low RPMs.

References:

Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness)
Print Date : 2018-06-01
Genetic Algorithm and ANN for Estimation of SPIV of Micro Beams
Print Date : 2017-12-17
Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear
Print Date : 2017-12-17
An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
Print Date : 2018-06-01
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
Print Date : 2018-06-01
Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
Print Date : 2018-03-01

Share To

Article Url

Ultrasonic Assisted Drilling of Bone