Harvesting Daylight in High-rise Office Buildings Using Phyllotaxis Model
Subject Areas : ArchitectureAmirhossein Zekri 1 , Rima Fayaz 2 , Mahmood Golabchi 3
1 - Ph.D. Candidate, School of Architecture and Environmental Design, Iran University of Science and Technology, Tehran, Iran.
2 - Associate Professor, Faculty of Architecture and Urbanism, University of Art, Tehran, Iran
3 - Professor, Faculty of Fine Arts, University of Tehran, Tehran, Iran.
Keywords: Daylight, Biomimicry, High-rise building, visual comfort, Energy efficiency, Phyllotaxis,
Abstract :
Various researches have introduced methods to use daylight in office buildings in the Middle East zone, but none of them have ever considered the use of plant leaf arrangement, called phyllotaxis, as a comprehensive solution for harvesting daylight. The idea of the Phyllotaxis Tower has been raised for several years but the main question of this research is whether using the phyllotaxis model is capable of exploiting daylight in high-rise buildings or not. So, in response to this question, the main aim of the research was set to evaluate daylight efficiency in high-rise office buildings by presenting an exemplary and phyllotaxis-inspired design. The research method is encompassed several steps including, studying the literature on the subject firstly, then modeling a prototype building based on the Biomimicry Problem-Based approach, and eventually computer simulation to evaluate the performance of the proposed building. The results show that office units can get daylight illuminance of 500 lux at 50% of operating time per year in addition to proper performance on four single days of different seasons of the year. Furthermore, the sample building obtained label B of energy consumption from Standard No. 14254 presented by the Institute of Standards and Industrial Research of Iran, which has been compared with the energy label of 45 office buildings in the same location and same climate conditions, based on the figures are defined on the aforementioned standard and has the best performance among them.
Akaf, H., Kohansal, M., Moshari, S., & Gholami, J. (2019). A novel decision-making method for the prioritization of passive heating systems use; case study: Tehran. Journal of Building Engineering, 26, 1-16.
Al-Obaidi, K. M., Ismail, M., & Rahman, A. M. A. (2014). A study of the impact of environmental loads that penetrate a passive skylight roofing system in Malaysian buildings, Frontiers of Architectural Research, 3(2), 178-191.
American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (2017). ANSI/ASHRAE Standard 140-2017 – Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs. Atlanta: Author.
American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (2013). ANSI/ASHRAE Standard 55-2013 - Thermal Environmental Conditions for Human Occupancy. Atlanta: Author.
Amiri, M. P. (2015). Optimization glass facade in office building and impact of buildings form. Unpublished master’s thesis, University of Tehran, Tehran.
Bagheri, F., Mokarizadeh, V., & Jabbar, M. (2013). Developing energy performance label for office buildings in Iran. Energy and Buildings, 61, 116–124.
Bashiri, A., & Alizadeh, S. H. (2018). The analysis of demographics, environmental and knowledge factors affecting prospective residential PV system adoption: A study in Tehran. Renewable and Sustainable Energy Reviews, 81(2), 3131-3139.
British Standards Institution. (2011). European Standard: BS EN 12665:2011 - Light and lighting. Basic terms and criteria for specifying lighting requirements. London: Author.
Brukhin, V., & Morozova, N. (2011). Plant Growth and Development - Basic Knowledge and Current Views. Mathematical Modelling of Natural Phenomena, 6(02), 1-53.
Ghahraman, A. (2012). Basic botany. Tehran: University of Tehran.
Ghiabaklou, Z. (2017). Foundation of building physics No.2: Setting environmental conditions. (12th ed.). Tehran: Amirkabir University of Technology.
Heidari, S. (2016). Energy planning in Iran relying on the building sector. (2nd ed.). Tehran: University of Tehran.
Institute of Standards and Industrial Research of Iran. (2016). No. 14254 - Non-Residential Building - Criteria for Energy Consumption and Energy Labeling Instruction. Tehran: Author.
Janzadeh, A., Kalantari, G. (2013). Phillotactic Towers, A Step Towards Islamic Housing Architecture Values with a Sustainable Development Approach in Contemporary Cities. Architecture and Sustainable Urban Spaces. Proceedings of the First National Conference on Sustainable Urban Architecture and Urban Space. November-December. Mashhad: Parman applied research group.
Lopez, M., Rubio, R., Martin, S., & Croxford, B. (2017). How plants inspire façades. From plants to architecture: Biomimetic principles for the development of adaptive architectural envelopes. Renewable and Sustainable Energy Reviews, 67, 692–703.
Madlener, R., & Sunak, Y. (2011). Impacts of urbanization on urban structures and energy demand: What can we learn for urban energy planning and urbanization management?. Sustainable Cities and Society, 1, 45-53.
Maglic, M. J. (2012). Biomimicry: Using nature as a model for design. Unpublished master’s thesis, University of Massachusetts Amherst, Amherst.
Masoumi, S. (2012). Introducing a new, nature-based model for high-rise residential building architecture (Phillotactic Tower), Unpublished master’s thesis, Tabriz Islamic of Art University, Tabriz.
Mensah, J., Casadevall, S.R. (2019). Sustainable development: Meaning, history, principles, pillars, and implications for human action: Literature review. Cogent Social Sciences, 5, 1-21.
Micheal, A., & Heracleous, C. (2017). Assessment of Natural Lighting Performance and Visual Comfort of Educational Architecture in Southern Europe: The Case of Typical Educational School Premises in Cyprus, Energy and Buildings, 140, 443-457.
Ministry of Health and Medical Education. (2017). Comprehensive guide to measure and evaluate lighting in workplaces in Iran. Hamedan: Daneshju.
Ministry of Roads and Urban Development. (2017). Design and implementation of electrical installations of buildings – Article 13 of the National Building Regulations of Iran (3th ed.). Tehran: Road, Housing, and Urban Development Research Center.
Ministry of Roads and Urban Development. (2017). Energy-saving – Article 19 of the National Building Regulations of Iran (3th ed.). Tehran: Iran Development Publishing.
Miri, M., Kompany Saeed, M. (2014). Assessing daylight access requirements in Iranian national building code (Case study in Qazvin), Armanshahr Architecture & Urban Development, 7, 109-121.
Mostafaeipour, A., Qolipour, M., & Mohammadi, K. (2016). Evaluation of installing photovoltaic plants using a hybrid approach for Khuzestan province, Iran. Renewable and Sustainable Energy Reviews, 60, 60–74.
Naderi, H., Rezvani, F., Minaei, F., & Nasiri, G. (2014). Investigation of energy consumption and determination of energy labeling in 40 office buildings in Tehran. Heating, Cooling, and Air Conditioning. Proceedings of the 5th International Conference on Heating, Cooling and Air Conditioning. June 10-12, Tehran: Oil Industry Research Institute.
Najafi, E. (2017). Design of Kashan flower garden with a bionic approach inspired by sunflower form. Unpublished master’s thesis, University of Kashan, Kashan.
National Glass Association. (2017). Glass Technical Paper FB50-17: Building Energy Performance Criteria Terms and References Related to Glass and Glazing. Vienna: Author.
Neufert, E., Neufert, P. (2014). Architectural Standard - Ernst & Peter Neufert - Architects' Data. (4th ed.). London: Wiley-Blackwell.
Raziei, T. (2017). Climatic Geography of Iran by Koppen-Geiger Method and The study of the displacement of climatic zones of Iran in the 20th century. Earth and Space Physics, 43 (2), 419-439.
Ruban, A. V. (2015). Evolution under the sun: optimizing light harvesting in photosynthesis. Journal of Experimental Botany, 66 (1), 7–23.
Shafiei, M., Fayaz, R., & Heidari, S. (2014). Appropriate tall building form for receiving sun’s radiation energy in Tehran. Iranian Journal of Energy, 16 (4), 47-60.
Shi, B., & Vernoux, T. (2019). Patterning at the shoot apical meristem and phyllotaxis. Current Topics in Developmental Biology, 131, 81-107.
Spijkers, O. (2018). Intergenerational Equity and the Sustainable Development Goals. Sustainability, 10(11), 1-12.
Strauss, S., Lempe, J., Prusinkiewicz, P., Tsiantis, M., & Smith, R. S. (2020). Phyllotaxis: is the golden angle optimal for light capture?. New Phytologist, 225 (1), 499-510.
Taheri, H. (2012). Design glass facade with energy storage (design of a residential unit in Tehran climate). Unpublished master’s thesis, University of Tehran, Tehran.
The World Bank. (2015). Fossil fuel energy consumption (% of total). Retrieved March 17, 2019, from https://data.worldbank.org/indicator/EG.USE.COMM.FO.ZS?end=2015&start=1960&view=chart
Urpelainen, J., & Yang, J. (2019). Global patterns of power sector reform, 1982–2013. Energy Strategy Reviews, 23, 152–162.
Valinejab Shoubi, M., Valinejab Shoubi, M., Bagchi, A., & Shakiba Barough, A. (2014). Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches. Ain Shams Engineering Journal, 6(1), 41-55.
Zarei, S. (2012). Optimization of solar facades for maximum use of sunlight in the office spaces in Tehran. Unpublished master’s thesis, University of Tehran, Tehran.