Journal of the Iranian Chemical Research: 1 (1)

Open Access Article

1 - Kinetic study of cis-polybutadiene epoxidation by using 1HNMR spectroscopy in buffered oxone® solution with tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC)
Farzaneh Hossein Poor Rajabi Mir Mohammad Alavi Nikje Bahman Vasheghani Farahani Narges Sabouri

Cis-polybutadiene was functionalized using in–situ generated DMD as oxidant and tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC). The epoxidation process was investigated by 1HNMR spectroscopy. 1HNMR spectrum analysis of products confirms the absenc More

Cis-polybutadiene was functionalized using in–situ generated DMD as oxidant and tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC). The epoxidation process was investigated by 1HNMR spectroscopy. 1HNMR spectrum analysis of products confirms the absence of ring opening side products in epoxidation reaction. Various factors such as reaction temperature, reaction time and the concentrations of oxidant, PTC and polymer are also examined in detail. Kinetic study showed that the catalytic epoxidation reaction of cis-polybutadiene is first-order with respect to double bonds and activation energy for the reaction is 22.82 KJ/mol. Manuscript profile

Open Access Article

2 - Anodic stripping voltammetry determination of Pb, Cd, Zn, and Cu in blood samples of children in some areas of Ibb governorate
Nabil A.F. Alhemiary Mohamad A.H. Al-Duais Ali A. Mutair Anwar A. Wassel Bassam M. Alshrabi Bilal A. Albadany

Anodic stripping voltammetric determination of Pb, Cd, Zn and Cu in blood samples of 132 children was developed. The children's ages range was between 6 months and 6 years and the samples were collected from different areas of Ibb governorate (Yemen). We used anodic str More

Anodic stripping voltammetric determination of Pb, Cd, Zn and Cu in blood samples of 132 children was developed. The children's ages range was between 6 months and 6 years and the samples were collected from different areas of Ibb governorate (Yemen). We used anodic stripping voltammetry for analyzing and determination of cited metals in the blood of all children. Large variation in the results have been correlated to the area inhabited, age differences and other factors. It was found that areas, which have environmental struts such as waste solid and waste water, had more quantities of these metals in blood samples in comparison with other safer sites. This is may be due to the lower concentration of Cd and Pb in samples. Also the results indicate that both Pb, Cd found in high mean concentration in blood samples of males children than in females children similarly the effect of age indicate that all younger children (between 6 months and 1 year) had shown comparatively lesser quantity of these metals in comparison with elder children (between 4 – 6 yeas). Manuscript profile

Open Access Article

3 - Sensitive and spectrophotometric methods for the determination of Azathioprine in tablets using indigo carmine and methyl orange
Smita Sharma Mukesh Sharma

A simple, economical, precise and fast visible spectrophotometric method has been developed for the determination of Azathioprine in tablet dosage form. Developed method is based on the formation of extractable colored complex of drug with colouring agent Indigo Carmine More

A simple, economical, precise and fast visible spectrophotometric method has been developed for the determination of Azathioprine in tablet dosage form. Developed method is based on the formation of extractable colored complex of drug with colouring agent Indigo Carmine and Methyl orange. A wavelength maximum was found to be 683.7 nm and 566 nm. The concentration range of 15-50 μg mL-1 with of percentage recovery 100.05-101.31 %, while the linear regression, LOD and LOQ were 99.42-99.08 %, 0.38 and 0.84 μg mL-1 and 0.74 and 0.18 μg mL-1, respectively. Two new sensitive spectrophotometric methods are proposed for the determination of Azathioprine using bromate-bromide mixture and two dyes, methyl orange and indigo carmine, as reagents. The methods entail the addition of a known excess of bromate-bromide mixture to Azathioprine, in acetic acid medium followed by determination of residual bromine by reacting with a fixed amount of either indigo carmine and measuring the Absorbance at 683.6 nm (Method A) or methyl orange measuring the absorbance at 566 nm (Method B). Manuscript profile

Open Access Article

4 - Application of hydrotropic solubilization in spectrophotometric analysis of Esomeprazole and Itopride pharmaceutical combined tablet dosage forms
Mukesh Sharma Smita Sharma

Two simple, accurate and precise methods for simultaneous estimation of Esomeprazole and Itopride in bulk drug and tablet dosage form have been described. Method-A employs formation and solving of simultaneous equation using 231 and 370 nm as two analytical wavelengths. More

Two simple, accurate and precise methods for simultaneous estimation of Esomeprazole and Itopride in bulk drug and tablet dosage form have been described. Method-A employs formation and solving of simultaneous equation using 231 and 370 nm as two analytical wavelengths. Method -B is Absorption ratio method, which uses 308 and 331 nm as two analytical wavelengths.Beer’s law was obeyed in the concentration range 5-35 μg/ml for Esomeprazole and 5-40 μg mL-1 for Itopride. In the present investigation, 0.5 Metformin hydrochloride solutions (hydrotropic solubilizing agent) were employed to solubilize, Esomeprazole and Itopride from fine powder of its tablets to carryout Spectrophotometric analysis. The optimized methods showed good reproducibility and recovery with standard deviation of < 1.0% and percent relative standard deviation less then 2.0%, allow the simultaneous estimation of Esomeprazole and Itopride in concentration ranges employed for this purpose in the assay of bulk drug and tablets. Manuscript profile

Open Access Article

5 - Synthesis and antimicrobial activity of some novel heterocycles containing thiazole, oxazole, thiazine, oxazine and triazole moiety
Vijay V. Dabholkar Sunil R. Patil Rajesh V. Pandey

Indandione 1 was brominated to yield 2-bromoIndandione 2 which on further reacted with substituted thiocarbamides, carbamides, 2-aminothiophenols, 2-aminophenol and triazoles to furnished 3-substituted aniline-2-thia-4-aza-6,7-benzo-8-oxo-bicyclo [3.3.0]-1(5),3-octadien More

Indandione 1 was brominated to yield 2-bromoIndandione 2 which on further reacted with substituted thiocarbamides, carbamides, 2-aminothiophenols, 2-aminophenol and triazoles to furnished 3-substituted aniline-2-thia-4-aza-6,7-benzo-8-oxo-bicyclo [3.3.0]-1(5),3-octadiene 3, 3-substituted aniline-2-oxa-4-aza-6,7-benzo-8-oxo-bicyclo [3.3.0]-1(5),3-octadiene 4, 2-Thia-5-aza-9-oxo-3,4-(3’-substituted) benzo-7,8-benzo-bicyclo [4.3.0]-1(6) nonene 5, 2-oxa-5-aza-9-oxo-(3, 4)-(7, 8)-dibenzo-bicyclo [4.3.0]-1(6) nonene 6, 3-substituted-(1,2,4) triazolo [4,5-b] [indeno (2,3-e)]-1,3,4-thiadiazine 7 respectively. Manuscript profile

Open Access Article

6 - Hybrid-DFT study and NBO interpretations of conformational behaviors of 2-methoxy-1,2,4,5-tetrahydro-benzo[d]oxepine, -thiepine and -selenepine
Davood Nori-Shargh Sogand Sarikhani Hooriye Yahyaei Seiedeh Negar Mousavi Nasrin Masnabadi

NBO analysis and density functional theory (DFT: B3LYP/6-311+G**) based method were used to study the impacts of the anomeric effects (AE) on the conformational properties of 2-methoxy-1,2,4,5-tetrahydro-benzo[d]oxepine (1), -thiepine (2) and -selenepine (3). The Gibbs More

NBO analysis and density functional theory (DFT: B3LYP/6-311+G**) based method were used to study the impacts of the anomeric effects (AE) on the conformational properties of 2-methoxy-1,2,4,5-tetrahydro-benzo[d]oxepine (1), -thiepine (2) and -selenepine (3). The Gibbs free energy difference (Geq–Gax) values (i.e. ΔGeq-ax) at 298.15 K and 1 atm between the axial and equatorial conformations increase from compound 1 to compound 2 but decrease from compound 2 to compound 3. The NBO analysis showed that the AE associated with donor-acceptor (LP→σ*) interactions increases from compound 1 to compound 2 but decreases from compound 2 to compound 3. Also, the calculated dipole moment difference [Δ(μeq - μax)] values between the axial and equatorial conformations increase from compound 1 to compound 2 but increase from compound 2 to compound 3. Based on the results obtained, there is no conflict between the AE and the electrostatic interactions [i.e. Δ(μeq - μax)] on the conformational behaviors of compounds 1-3. Manuscript profile

Open Access Article

7 - 4-Chloro-3,5-dioxaphosphacyclohepta[2,1-;3,4-']dinaphthalene (BINOL-PCl) as a Bulky and Efficient Reagent for the Transformation of Symmetric and Asymmetric Benzoins to Corresponding Benziles
Nader Noroozi Pesyan Mahnaz Saraei Bakhshali Massoumi Maryam Sarbazi

4-Chloro-3,5-dioxaphosphacyclohepta[2,1-;3,4-']dinaphthalene (BINOL-PCl) was found to be an efficient, bulky and selective reagent for the transformation of symmetric and asymmetric benzoins to the corresponding benziles at 0 °C to room temperature under nitrogen More

4-Chloro-3,5-dioxaphosphacyclohepta[2,1-;3,4-']dinaphthalene (BINOL-PCl) was found to be an efficient, bulky and selective reagent for the transformation of symmetric and asymmetric benzoins to the corresponding benziles at 0 °C to room temperature under nitrogen atmosphere in good yield. Manuscript profile

Open Access Article

8 - Chemical modification of maleic anhydride polymers with carbazole
Mohammad Hossein Nasirtabrizi Zeinab Mohammadpoor Ziaei Aiyoub Parchehbaf Jadid

Maleic anhydride (MAN) copolymers with methyl methacrylate(MMA), ethyl methacrylate(EMA), methyl acrylate(MA), ethyl acrylate (EA) and buthyl acrylate (BA) ( in a 1:1 mole ratio) were synthesized by free radical polymerizations method under vacuum -azobis(isobutironitri More

Maleic anhydride (MAN) copolymers with methyl methacrylate(MMA), ethyl methacrylate(EMA), methyl acrylate(MA), ethyl acrylate (EA) and buthyl acrylate (BA) ( in a 1:1 mole ratio) were synthesized by free radical polymerizations method under vacuum -azobis(isobutironitrile)(AIBN) as an initiator of reaction at 701C. The copolymer compositions were determined using related 1H NMR spectra technique and the polydispersity indices of the copolymers determined using gel permeation chromatography (GPC) method. Then Carbazole (Cz) groups were attached to the obtained copolymers by ring opening reaction between carbazole and anhydride groups of MAN units to give the copolymers ICz-VCz in high yields. The anhydride group possesses a higher reactivity with the carbazole group. The ring opening reaction between the anhydride group and the carbazole is simple and fast. All the prepared polymers, were characterized by FT-IR and ¹H NMR, spectroscopic techniques. The glass transition temperature (Tg) of all copolymers was determined by dynamic mechanical thermal analysis (DMTA). All the polymers containing carbazole groups presented a high glass transition temperature in comparison to unmodified copolymers (I-V). It was found that these polymers with carbazole moieties have high thermal stability and the presence of bulky carbazole groups in polymer side chains leads to an increase in the rigidity of polymers. Manuscript profile

XML

List of Articles