XML
-
-
List of Articles
-
Open Access Article
1 - Investigation of electrochemical behavior of Fe and Mn ions at the surface of electrode/electrolyte interface using electrochemical impedance spectroscopy
nafiseh hajiabdolahMany studies have been conducted using electrochemical impedance spectroscopy (EIS) in recent decades. This is an accurate detection technique for electrochemical systems based on transmission function analysis between voltage and current. In this research, impedance, a MoreMany studies have been conducted using electrochemical impedance spectroscopy (EIS) in recent decades. This is an accurate detection technique for electrochemical systems based on transmission function analysis between voltage and current. In this research, impedance, admittance, and capacitance of composite graphite electrode are investigated and compared in Mn and Fe ions solutions in sulfuric acid medium. The results indicated lower Fe impedance than Mn and admittance greater than that of Mn, indicating a greater Fe conductivity than Mn. Additionally, higher capacitance of Fe than of Mn was because of higher electric characteristics of Fe as compared to Mn. These techniques have been an alternative for cyclic voltammogram (CV) and mainly help in the quantitative determination of kinetic and transmission parameters. Valuable data are obtained using Electrochemical impedance spectroscopy (EIS). Therefore, it can be concluded that EIS is a detecting technique for describing and evaluating the behavior of intermediary elements at the surface of electrode/electrolyte. Manuscript profile -
Open Access Article
2 - Chemical and antimicrobial properties of a flavonoid extracted from the Cleome turkmena Bobrov
Manijeh Joukar Kambiz Larijani Mohammad Hossein Farjam Mohammad Hadi Givianrad Fereshteh NematollahiIn the process of extracting chemical compounds from the extract of Cleome turkmena Bobrov, a flavonoid with a high weight percentage was extracted as pure green crystals. The compound was purified using several chromatographic and recrystallization methods and identifi MoreIn the process of extracting chemical compounds from the extract of Cleome turkmena Bobrov, a flavonoid with a high weight percentage was extracted as pure green crystals. The compound was purified using several chromatographic and recrystallization methods and identified by crystallography and 1H, 13C NMR and it was determined that this flavonoid is Salvigenin with the scientific name 5-hydroxy-4',6,7-trimethoxyflavone. Also, according to the lot of reports about the antibiotic properties of flavonoids, the effect of Salvigenin on inhibiting the growth of several bacteria and fungi was investigated by minimal inhibitory concentration (MIC) and disk diffusion (DD) methods. The best inhibition against Bacillus pumilus with MIC value of 64 µg/ml. In disk diffusion method, best result was recorded against Salmonella typhi. Manuscript profile -
Open Access Article
3 - Synthesis of NiO and NiFe2O4 nanoparticles by ultrasonic method and investigation of microhardness of polymer composites made with these nanoparticles and epoxy resin
Narjes Karim jabber jaber Mohammad Moarrefi romeileh Nasrin ghazkoobIn this article, nickel oxide and nickel ferrite nanoparticles were first synthesized using an ultrasonic method as a simple, fast, eco-friendly, and cost-effective method. To ensure the properties of the nanoparticles and to avoid problems in the following steps, the n MoreIn this article, nickel oxide and nickel ferrite nanoparticles were first synthesized using an ultrasonic method as a simple, fast, eco-friendly, and cost-effective method. To ensure the properties of the nanoparticles and to avoid problems in the following steps, the nanoparticles are synthesized under various analyzes such as scanning electron microscopy (SEM) images, infrared spectroscopy (IR), an X-ray diffraction pattern (XRD), and Vibrating sample magnetometry (VSM). In the next step, using these nanoparticles and epoxy resin, a polymer matrix composite was made. Then, the composites were tested for corrosion against acid and hardness tests based on the ASTM D2583-13 standard. The results showed that the structure of the manufactured nanoparticles is very uniform and homogeneous. In addition, the hardness of composites made from nickel ferrite and nickel oxide nanoparticles was improved compared to pure polymer, and composites made from nickel ferrite had better hardness than composites made from nickel oxide. Also, the acid corrosion test results showed that creating a composite layer around aluminum can protect it against acid corrosion. Manuscript profile -
Open Access Article
4 - One pot Solvent free Synthesis of Biginelli Type Derivatives using Ag2O/GO/TiO2 Composite Nanostructure and evaluation of biological activity
Fatemeh Samandizadeh Mohammad Mohammadi Ayeh Rayatzadeh Neda HasanzadehThe Biginelli Reaction is a one-pot acid catalysed cyclocondensation of -keto ester, urea and aromatic aldehyde which leads to the synthesis of functionalised 3,4-dihydro-2(H)-pyrimidinones (DHPMs). This three-component reaction for the synthesis of dihydropyrimidinone MoreThe Biginelli Reaction is a one-pot acid catalysed cyclocondensation of -keto ester, urea and aromatic aldehyde which leads to the synthesis of functionalised 3,4-dihydro-2(H)-pyrimidinones (DHPMs). This three-component reaction for the synthesis of dihydropyrimidinone and corresponding dihydropyrimidinethiones has now been known for more than a century since first reported in 1893. The classical reaction has been modified in the recent past by using various catalysts and several structural variants in different solvents to synthesize large number of Biginelli type compounds. Also, these DHPMs (synthetic and natural) possess a wide range of pharmacological activities. Manuscript profile -
Open Access Article
5 - Structure, morphology, and luminescence properties of Electrosynthesized ZnS: Cu, Cl Nanoparticles
nafiseh hajiabdolah Parizad Rezaee Mohammad YousefiElectrosynthesis of zinc sulfide nanoparticles doped with copper and chlorine has been investigated in this study. For the electrosynthesis of ZnS, a constant current pulse of 200 mA cm-2 was applied to zinc nitrate and sodium thiosulfate solution containing 1 M hydroch MoreElectrosynthesis of zinc sulfide nanoparticles doped with copper and chlorine has been investigated in this study. For the electrosynthesis of ZnS, a constant current pulse of 200 mA cm-2 was applied to zinc nitrate and sodium thiosulfate solution containing 1 M hydrochloric acid in an electrochemical cell. The thin film of zinc sulfide nanoparticles was placed on a graphite electrode. For doping Cl- and Cu+ on ZnS, the modified electrode was placed in copper sulfate solution containing 0.1 M potassium chlorate under a constant potential of -0.9 V for 3 minutes. By changing the concentration of potassium chlorate from 0.1 to 0.01 and 0.0001 M, the amount of doped Cl was variable, therefore; nanoparticles with different luminescence properties were achieved. Based on the X-ray diffraction pattern average crystallite size for nanocomposites is the same and about 34-64 nm. Using scanning electron microscopy imaging it was observed that synthesized nanocomposites have appropriate uniformity. Characterization was performed using XRD and FT-IR methods. The morphology and luminescence properties of these nanoparticles were studied using SEM and UV-Visible. Manuscript profile -
Open Access Article
6 - A Simple synthesis of vinylphosphonates from dialkyl(aryl) phosphites and alkyl(aryl) propiolates in aqueous acetone
Maryam Adlu Issa Yavari Javad AzizianIn this work, simple and mild efficient synthesis of various organophosphorus compounds based on the reaction of dialkyl(aryl) phosphites with alkyl(aryl) propiolates in the presence of NaCN in aqueous acetone, is described. Organophosphorus compounds are widely used in MoreIn this work, simple and mild efficient synthesis of various organophosphorus compounds based on the reaction of dialkyl(aryl) phosphites with alkyl(aryl) propiolates in the presence of NaCN in aqueous acetone, is described. Organophosphorus compounds are widely used in organic synthesis, such as agricultural chemicals, flame retardants, medicinal agents and the preparation of insecticides. Using this approach, to a solution of alkyl(aryl) propiolates and dialkyl(aryl) phosphite was added sodium cyanide in acetone/H2O at room temperature, and the solution was stirred. The solvent was removed under reduced pressure, and the residue was dissolved in EtOAc, washed with aqueous NaHCO3 and brine, dried (Na2SO4), and the solvent was removed under reduced pressure. The crude product was purified by flash column chromatography on silica gel using n-hexane-EtOAc as eluent. Then, All organophosphorus compounds are obtained in excellent yields. The method offers several advantages including operational simplicity, high diversity via various functional groups and fairly good yields. Manuscript profile
-
The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024