• فهرست مقالات dibenzothiophene

      • دسترسی آزاد مقاله

        1 - Deep Desulfurization of Fuel Diesels Using Alkyl Sulfate and Nitrate Containing Imidazolium as Ionic Liquids
        Ali Mehdizadeh Amir N. Ahmadi Fakhrosadat Fateminassab
        1-ethyl-3-methylimidazolium ethyl sulfate [Etmim][EtSO4 ],1, 3-dimethylimidazolium methyl sulfate [Mmim][MeSO4 ] and 1-octyl-3-methylimidazolium nitrate [Omim][NO3 ] ionic liquids have been used in thermal oxidative desulfurization of model fuel oils consisting of 500 p چکیده کامل
        1-ethyl-3-methylimidazolium ethyl sulfate [Etmim][EtSO4 ],1, 3-dimethylimidazolium methyl sulfate [Mmim][MeSO4 ] and 1-octyl-3-methylimidazolium nitrate [Omim][NO3 ] ionic liquids have been used in thermal oxidative desulfurization of model fuel oils consisting of 500 ppm solutions of benzothiophene (BT) and dibenzothiophene (DBT) in dodecane. The efficiency of sulfur removal from BT and DBT solutions by these ILs as well as the effect of anion and cation chain length have also been investigated. The ILs studied performed pretty efficiently in removal of sulfur containing compounds and sulfur contents have been reduced to 18-27% following the order below: [Mmim][MeSO4 ] > [Etmim][EtSO4 ] > [Omim][NO3 ]. To further study the performance of the ILs studied, multiple extractions of BT and DBT solutions were also carried out to reduce sulfur content to 81% and 68% for DBT and BT solutions, respectively, after 5 extraction cycles. These environmentally friendly ILs could also be quantitatively regenerated and were shown to be as efficient in sulfur removal after 5 regeneration cycles. پرونده مقاله
      • دسترسی آزاد مقاله

        2 - Improvement of Desulfurization Performance of Rhodococcus erythropolis IGTS8 by Assembling Spherical Mesoporous Silica Nanosorbents on the Surface of the Bacterial Cells
        Navid Ahmadi Nasab Hassan Hassani Kumleh Mahmood Kazemzad Farideh Ghavi Panjeh Fatemeh Davoodi-Dehaghani
        MCM-41 mesoporous silica is synthesized based on a self assembly method, using a quaternary ammonium template, CTAB for the adsorption of sulfur compounds from model oil (1.0 mmol/l DBT in dodecane solution). Then the adsorption capability of MCM-41 assembled on the چکیده کامل
        MCM-41 mesoporous silica is synthesized based on a self assembly method, using a quaternary ammonium template, CTAB for the adsorption of sulfur compounds from model oil (1.0 mmol/l DBT in dodecane solution). Then the adsorption capability of MCM-41 assembled on the surface of bacteriumRhodococcus erythropolisIGTS8 is examined regarding the improvement of the biodesulfurization process of the oil compound based on the measurement of DBT consumption rate and 2-HBP production. Study of the model oil desulfurization by the cells assembled with MCM-41 nanosorbent showed a further improvement in DBT reduction rate in comparison with the free cells. The results of the investigations showed that the maximum specific desulfurization activity in terms of DBT consumption rate and 2-HBP production are 0.34 μmol DBT min-1g DCW-1and 0.126 μmol 2-HBP min-1g DCW-1 which indicated an increase of 19% and 16% compared to the highest specific desulfurization activity of free cells, respectively. پرونده مقاله
      • دسترسی آزاد مقاله

        3 - Catalytic oxidative desulfurization of dibenzothiophene by heterogeneous M2+/Al-layered double hydroxide (M2+ = Zn, Mg, Ni) modified zinc oxide
        Nur Ahmad Nova Yuliasari Fitri Arsyad Idha Royani Risfidian Mohadi Aldes Lesbani
        In this study, the preparation of layered double hydroxide-metal oxide (ZnAl-ZnO, MgAl-ZnO, and NiAl-ZnO) was successful. The characterization of the catalyst used XRD, FTIR, and SEM analysis. The catalyst shows high oxidative desulfurization of dibenzothiophene. The pe چکیده کامل
        In this study, the preparation of layered double hydroxide-metal oxide (ZnAl-ZnO, MgAl-ZnO, and NiAl-ZnO) was successful. The characterization of the catalyst used XRD, FTIR, and SEM analysis. The catalyst shows high oxidative desulfurization of dibenzothiophene. The percentage conversion of dibenzothiophene on ZnAl-ZnO, MgAl-ZnO, and NiAl-ZnO was 99.38%, 99.34%, and 99.90%, respectively. The acidities of ZnAl-ZnO, MgAl-ZnO, and NiAl-ZnO were 0.798, 2.469, and 0.184 mmol/g, respectively. The catalysts are heterogeneous systems, and the advantage is that they can be used for reusability. After 3 cycles of catalytic reactions at 323 K for 30 min, reusability proves that the percentage conversion of dibenzothiophene on ZnAl-ZnO, MgAl-ZnO, and NiAl-ZnO had a stable structure. پرونده مقاله
      • دسترسی آزاد مقاله

        4 - گوگردزدایی زیستی دی‎بنزوتیوفن به‎عنوان الگوی ترکیب گوگردی نفت کوره با باکتری تثبیت‎شده بر پلی‎اتیلن
        بابک قربانی‎ برناجی سرور صادقی فرهاد سلیمی
        در این پژوهش، روش گوگردزدایی زیستی (BDS) با باکتری سودوموناس آئروژینوزا تثبیت‎شده بر پایه پلی‎اتیلن برای گوگرد زدایی زیستی دی‎بنزو‎تیوفن (DBT) به‎عنوان نمونه الگوی گوگردی در نفت کوره (مازوت) بررسی شد. نتایج به‎دست آمده برپایه روش طیف سنجی نوری در چکیده کامل
        در این پژوهش، روش گوگردزدایی زیستی (BDS) با باکتری سودوموناس آئروژینوزا تثبیت‎شده بر پایه پلی‎اتیلن برای گوگرد زدایی زیستی دی‎بنزو‎تیوفن (DBT) به‎عنوان نمونه الگوی گوگردی در نفت کوره (مازوت) بررسی شد. نتایج به‎دست آمده برپایه روش طیف سنجی نوری در طول موج 325 نانومتر نشان‎دهنده حذف زیستی 90/54 درصد از دی‎بنزوتیوفن در غلظت اولیه mg.l-1 5 در pH برابر با 7 در دمای°C 37 پس از 90 دقیقه زمان تماس با 1/0 گرم از زیست کاتالیست بود. شرایط بهینه به‎دست آمده برای نمونه مازوت مورداستفاده قرار گرفت و کاهش کل مقدار گوگرد (TSC) به کمک طیف سنجی فلورسانس پرتو ایکس(XRF) بررسی شد. نتیجه های به‎دست آمده نشان‎دهنده حذف 33/075 درصد از کل ترکیبات گوگرد دار موجود در نمونه مازوت است. مطالعه های سینتیک نشان‎دهنده فرایند جذب شیمیایی بود و سرعت واکنش از معادله شبه‎درجه دوم پیروی می کرد. اطلاعات به‎دست آمده از جذب دی‎بنزوتیوفن بر زیست کاتالیست با هم‎دما فروندلیچ همخوانی داشت. ریخت سطح و گروه های عامل سطحی زیست کاتالیست به‎ترتیب با میکروسکوپ الکترونی روبشی(SEM) و طیف‎سنجی فروسرخ تبدیل فوریه (FT‎IR) بررسی شد. پرونده مقاله