• فهرست مقالات Sol-gel process

      • دسترسی آزاد مقاله

        1 - Comparison of the vanadyl-selective electrodes prepared by sol–gel and PVC membrane techniques
        Masoud Giahi Mohammad Ali Bagherinia Azin Azari
        Sol-gel and polymeric membrane electrodes, based on thiacalix[4]arene as a neutral carrier, weresuccessfully developed for the detection of VO2+ in aqueous solutions. The sol-gel and PVCmembrane electrodes exhibited linear response with Nernstian slopes of 29.3 and 28.4 چکیده کامل
        Sol-gel and polymeric membrane electrodes, based on thiacalix[4]arene as a neutral carrier, weresuccessfully developed for the detection of VO2+ in aqueous solutions. The sol-gel and PVCmembrane electrodes exhibited linear response with Nernstian slopes of 29.3 and 28.4 mV perdecade, respectively, within the vanadyl ion concentration ranges from 1.0 × 10-6 to 1.0 × 10-1mol dm-3 and from 1.0 × 10-5 to 1.0 × 10-1 mol dm-3 for sol-gel and PVC membrane sensors.The PVC-based and sol-gel electrodes show detection limits of 3.1 × 10-6 and 4.9 × 10-7 mol dm-3, respectively, and also response time of about 15 s to achieve a 95% steady potential for VO2+concentration. By testing the stability lifetimes of the electrodes over a six-month period, nosignificant change was observed in the performance of the sol-gel electrode, however, the PVCbasedvanadyl-selective electrode exhibited a gradual decrease in the slope after two months.Investigating the influence of membrane composition, the pH of the test solution, and theinterfering ions on the electrodes performance revealed good selectivity of electrodes for a numberof alkali, alkaline earth, transition and heavy metal ions. The determined isothermal temperaturecoefficients of these electrodes showed a better thermal stability of sol-gel electrode rather thanthat of the PVC-based vanadyl-selective electrode, however, the electrodes performance isdeteriorated by temperatures higher than 50 °C. پرونده مقاله
      • دسترسی آزاد مقاله

        2 - Photocatalytic Mineralization of Methylene BlueAqueous Solutions by Ag/TiO2 Nano Composite
        Leila Torkian Ehsan Amereh
        Nanocomposite of Ag/TiO2 and nanocrystalline TiO2 were prepared by using TiCl4 as a precursor in a simple sol-gel process. The prepared photo-catalysts were characterized by X-ray diffraction (XRD), scanning electron micrographs (SEM), energy dispersive X-ray microanaly چکیده کامل
        Nanocomposite of Ag/TiO2 and nanocrystalline TiO2 were prepared by using TiCl4 as a precursor in a simple sol-gel process. The prepared photo-catalysts were characterized by X-ray diffraction (XRD), scanning electron micrographs (SEM), energy dispersive X-ray microanalysis (EDX), transmission electron microscopy (TEM) and diffuse reflectance spectroscopy (DRS). A complete and effective photocatalytic degradation of a cationic aromatic dye, Methylene blue, in aqueous solutions has been carried out using nanocomposite of Ag/TiO2 and nanocrystalline TiO2 under UV-C light irradiation. Experiments were conducted to compare the photocatalytic activities of nanocomposite Ag/TiO2 with nanocrystalline TiO2 . The photoreactions were followed by monitoring the degradation of the dye as a function of irradiation time, in the presence of the nanophoto-catalysts, by the visible/ultraviolet absorption spectroscopy. It has been found that the presence of silver in TiO2 nanoparticles reduces the duration of complete photocatalytic degradation of Methylene blue by 20% due to the enhancement of electron-hole separation by the electron trapping of silver particles. پرونده مقاله
      • دسترسی آزاد مقاله

        3 - Synthesis and Characterizations of Silica Nanoparticles by a New Sol-Gel Method
        B. Gorji M.R. Allahgholi Ghasri R. Fazaeli N. Niksirat
        Silica nanoparticles were synthesized by chemical methods from tetraethylorthosilicate (TEOS), polyethylene glycol 5% and hydrochloric acid 0.001 N. The sol-gel process was applied for the preparation of nano silica gel. This method is hydrolysis and condensation reacti چکیده کامل
        Silica nanoparticles were synthesized by chemical methods from tetraethylorthosilicate (TEOS), polyethylene glycol 5% and hydrochloric acid 0.001 N. The sol-gel process was applied for the preparation of nano silica gel. This method is hydrolysis and condensation reactions of TEOS as precursor of silica. The optimal synthesis conditions for the preparation of silica nanoparticles were obtained and the produced silica nanoparticles were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results indicated that the silica nanoparticles were successfully formed. The prepared samples change from amorphous to α-crystallite phase. The XRD analysis indicated the amorphous structure of the synthesized silica nanoparticles while the SEM and TEM images exhibited monodispersedNano sized silica particles with a size about 34 nm. In this study, the soft process of sol-gel reaction is favourable from a view point of energy conservation. Additionally, the advantages of this technique were the purity of products and ability to control nanometer sized internal structure. پرونده مقاله
      • دسترسی آزاد مقاله

        4 - Preparation, Structural and Magnetic Behavior of Sr(AlCr)xFe(12-2x) O19 Hexagonal Ferrites
        Mahboobeh Alimoradi Mohammad Yousefi Babak Sadeghi Mostafa M.Amini Alireza Abbasi
        In this investigation, strontium hexaferrite nanocomposites co-doped with aluminum and chromium were prepared Sr(AlCr)xFe(12-2x)O19 with x different amounts (x= 0, 0.2, 0.4, 0.6 and 0.8), were synthesized. The magnetic nanocomposites have been prepared by simple sol-gel چکیده کامل
        In this investigation, strontium hexaferrite nanocomposites co-doped with aluminum and chromium were prepared Sr(AlCr)xFe(12-2x)O19 with x different amounts (x= 0, 0.2, 0.4, 0.6 and 0.8), were synthesized. The magnetic nanocomposites have been prepared by simple sol-gel auto-combustion method. The morphology and structure of nano-samples were determined by FTIR, XRD and FESEM . The results of the XRD pattern confirmed P63/mmc space group and the single phase of the synthesized samples. The crystal size of the prepared samples decreases with increasing Al and Cr.The magnetic properties of these compounds are determined by the VSM. Magnetic properties (Mr, Ms and Hc) were measured. The result showed that Mr and Ms decrease with the increase of Al and Cr. پرونده مقاله
      • دسترسی آزاد مقاله

        5 - Separation and Quantification of Hydrocarbons of LPG Using Novel MWCNT-Silica Gel Nanocomposite as Packed Column Adsorbent of Gas Chromatography
        Seyed Mojtaba Mostafavi Masoumeh Piryaei Ahmad Rouhollahi Ali Mohajeri
        In this study, a new silica gel based adsorbent was fabricated and its ability in separation and quantification of alkanes mixture was investigated. Silica gel (SiO2) is a polar absorbent which is mainly used to separate polar compounds. Also, the carbon materials such چکیده کامل
        In this study, a new silica gel based adsorbent was fabricated and its ability in separation and quantification of alkanes mixture was investigated. Silica gel (SiO2) is a polar absorbent which is mainly used to separate polar compounds. Also, the carbon materials such as activated carbon and recently carbon nanotube (CNTs), have been widely used for separation of nonpolar materials. Carbon nanotubes are nanosized carbon-based sorbents that have a high surface area and a large aspect ratio and are known to be stable at high temperatures. It is, therefore, conceivable to use of their unique properties in gas chromatography. In this work, a MWCNT-Silica gel nanocomposite was prepared by Sol-Gel process and it was used as stationary phase in gas chromatography for separation of alkanes mixture. In first part, ability of silica gel adsorbent was studied and then results were compared with new MWCNT-Silica gel nanocomposite. Finally, a quantitative investigation was done on a LPG sample and propane, 2-methylpropane, n-butane, 2,2-dimethylpropane, 2-methylbutane and n-pentane were measured by standard addition. پرونده مقاله
      • دسترسی آزاد مقاله

        6 - Separation of Aromatic and Alcoholic Mixtures using Novel MWCNT-Silica Gel Nanocomposite as an Adsorbent in Gas Chromatography
        Seyed Mojtaba Mostafavi Ahmad Rouhollahi Ali Mohajeri Masoumeh Piryaei
        The separations of alcohols with hydrophilic and hydrophobic parts, and the separation of aromatic mixtures, are extremely important processes in gas and petroleum industries. Choosing an adsorbent for performing this separation is the most important part of the process چکیده کامل
        The separations of alcohols with hydrophilic and hydrophobic parts, and the separation of aromatic mixtures, are extremely important processes in gas and petroleum industries. Choosing an adsorbent for performing this separation is the most important part of the process. Silica gel is used as an adsorbent is various techniques such as pressure swing adsorption (PSA) and gas and liquid chromatography. Due to the polarity of silica gel, it is used for the separation of polar molecules. Carbon materials such as activated carbon and recently carbon nanotube (CNTs) are widely used for the separation of nonpolar materials. In the course of this study, a new composite was fabricated using sol-gel methods. Multiwall carbon nanotubes (non-polar carbon-based adsorbents with high surface areas) were mixed with a silica gel base (a strong polar adsorbent). The composite was then used in the separation of mixtures of both aromatic hydrocarbons and alcohols. پرونده مقاله
      • دسترسی آزاد مقاله

        7 - Quantitative Determination of LPG Hydrocarbons by Modified Packed Column Adsorbent of Gas Chromatography Via Full Factorial Design
        Asghar Pasban Seyed Mojtaba Mostafavi Hanieh Malekzadeh Benyamin Mohammad Nazari
        In this study, a new silica gel based adsorbent was fabricated and its ability in separation and quantification of alkanes mixture was investigated. Silica gel (SiO2) is a polar absorbent which is mainly used to separate polar compounds. Also, the carbon materials such چکیده کامل
        In this study, a new silica gel based adsorbent was fabricated and its ability in separation and quantification of alkanes mixture was investigated. Silica gel (SiO2) is a polar absorbent which is mainly used to separate polar compounds. Also, the carbon materials such as activated carbon and recently carbon nanotube (CNTs), have been widely used for separation of nonpolar materials. Carbon nanotubes are nanosized carbon-based sorbents that have a high surface area and a large aspect ratio and are known to be stable at high temperatures. It is, therefore, conceivable to use of their unique properties in gas chromatography. Optimization of gas chromatography with modified and unmodified columns was investigated by full factorial design. According to the results of proposed design, the temperature, flow rate and carrier gas are known to be important factors affecting performance. In this work, a MWCNT-Silica gel nanocomposite was prepared by Sol-Gel process and it was used as stationary phase in gas chromatography for separation of alkanes mixture. In first part, ability of silica gel adsorbent was studied and then results were compared with new MWCNT-Silica gel nanocomposite. Finally, a quantitative investigation was done on a LPG sample and propane, 2-methylpropane, n-butane, 2,2-dimethylpropane, 2-methylbutane and n-pentane were measured by standard addition. Finally, the greatest difference between the response profiles in modified and unmodified column was determined. پرونده مقاله