-
دسترسی آزاد مقاله
1 - یک روش دو طرفه مبتنی بر فازور برای مکانیابی خطا در خطوط انتقال N مداره
موسی خدادادی آرپناهی مجید خوشنماروشهای دو طرفه موجود برای مکانیابی خطا در خطوط انتقال یا مخصوص خطوط تکمداره هستند و یا تنها برای خطوط دو مداره طراحی شدهاند. همچنین، فرمولبندی این روشها برای انواع مختلف خطا متفاوت است؛ چرا که این روشها برای هر نوع خطا از یک مدار معادل خاص در حوزه abc و یا یک چکیده کاملروشهای دو طرفه موجود برای مکانیابی خطا در خطوط انتقال یا مخصوص خطوط تکمداره هستند و یا تنها برای خطوط دو مداره طراحی شدهاند. همچنین، فرمولبندی این روشها برای انواع مختلف خطا متفاوت است؛ چرا که این روشها برای هر نوع خطا از یک مدار معادل خاص در حوزه abc و یا یک شبکه توالی مشخص استفاده میکنند. علاوه بر این، برخی از روشهای موجود، نمی توانند برخی از جنبههای مسأله مکانیابی خطا مانند اثر خازن شنت خط، تزویج سلفی و خازنی بین فازها و عدم ترانسپوز خطوط را در نظر بگیرند. در این مقاله، یک روش جامع، دقیق و سریع برای مکانیابی خطا در خطوط انتقال N مداره پیشنهاد میشود. برای این منظور، ابتدا یک مدار معادل ماتریسی- برداری ( MVEC ) پیشنهاد میشود که صرف نظر از نوع خطا، تعداد مدارهای خط، وجود و یا عدم وجود خازن شنت، تزویج سلفی و خازنی بین فازهای مختلف و عدم ترانسپوز خطوط، به یک فرمولبندی واحد منجر میشود. برای حل فرمولبندی ماتریسی-برداری حاصل و یافتن مکان خطا، یک الگوریتم دو مرحلهای پیشنهاد میشود که علی رغم تکراریبودن در تعداد تکرار بسیار پایین همگرا میشود. روش پیشنهادی، از اندازهگیرهای فازوری دو طرف خط برای محاسبه مکان خطا استفاده میکند، نیازی به دانستن امپدانس منابع دو سمت خط ندارد و دقت آن حساسیت بسیار کمی نسبت به مقاومت خطا دارد. شبیهسازی روش پیشنهادی بر روی مجموعه زیادی از سناریوها بر حسب نوع خطا، مقدار مقاومت خطا، مکانهای مختلف وقوع خطا و در نظر گرفتن نویز، دقت و کارایی الگوریتم پیشنهادی را نشان میدهد. پرونده مقاله -
دسترسی آزاد مقاله
2 - Optimal fault-location in smart grids with bfa and ts algorithms with the approach of reducing losses and network costs
Mahmoud Zadehbagheri Mohammadjavad KianiThe smart grid is actually the result of the integration of the structures of the power system and its communication structures, and this is the key point in the implementation of smart grid projects. This means that the integration of electricity production and distrib چکیده کاملThe smart grid is actually the result of the integration of the structures of the power system and its communication structures, and this is the key point in the implementation of smart grid projects. This means that the integration of electricity production and distribution reduces the costs of implementing a smart network, and in this regard, the preparation of the telecommunication platform is one of the most necessary requirements for moving in the direction of smartening the network. The ability to locate the fault and restore the power supply in time is one of the important indicators of a strong smart grid. Especially when a large number of DGs are connected to the system, the network structure and working mode will change, and the demands on the traditional fault location method will increase. In this article, due to the difficulty of using the traditional fault location method in distribution networks with DG, two smart algorithms, TS and BFA, have been used for fault location in this type of networks. So that the location of dynamic distributed generation sources such as wind turbines is done first, then their effect on providing the load profile in the presence of distribution network faults is discussed. The results of the simulation confirm the correctness and correctness of the performance of the proposed method, so that the case studies conducted can open the way for engineers to evaluate new fault. پرونده مقاله -
دسترسی آزاد مقاله
3 - یک روش بهبود یافته برای مکانیابی آنلاین خطا مبتنی بر واحد اندازهگیری فازور در خطوط انتقال با در نظر گرفتن حد حرارتی
محمدرضا رضائی سید رضا هادیان امرئی محمدرضا میوهدر این مقاله، یک روش بهبود‎‎یافته آنلاین برای تخمین همزمان پارامترها و محل‎خطا در خطوط انتقال مبتنی بر واحدهای اندازه گیری فازور نصب‎ شده در دو ‎طرف خط انتقال پیشنهاد شده است. برخلاف روشهای آفلاین، این روش به مشخصات هندسی خطوط، مقاومت ‎خطا و ام چکیده کاملدر این مقاله، یک روش بهبود‎‎یافته آنلاین برای تخمین همزمان پارامترها و محل‎خطا در خطوط انتقال مبتنی بر واحدهای اندازه گیری فازور نصب‎ شده در دو ‎طرف خط انتقال پیشنهاد شده است. برخلاف روشهای آفلاین، این روش به مشخصات هندسی خطوط، مقاومت ‎خطا و امپدانس منابع معادل تونن بستگی ندارد. مهمترین کاربرد مدلسازی خطوط، تخمین حد‎ حرارتی خطوط انتقال است که ظرفیت انتقال توان را محدود میسازد. روشهای آفلاین به کار‎ رفته، باعث بدون استفاده ماندن بخشی از ظرفیت انتقال توان و ایجاد تراکم غیر‎واقعی در سیستم انتقال میشوند. بنابراین، تخمین حد حرارتی باید به روشی تعیین گردد که بهصورتآنلاین بوده و دارای دقت و سرعت مناسبی باشد. محاسبه حد حرارتی کار پیچیده ای است که نیاز به تخمین پارامترهای خطوط، محاسبه دمای خطوط و تعیین شرایط آب و هوایی محیط اطراف خطوط مورد مطالعه دارد. لذا در این مقاله، روش جدیدی مبتنی بر ترکیب روش پایش مستقیم دمای هادی و روش مبتنی بر شرایط آب و هوایی پیشنهاد شده است. در این روش، ابتدا پارامترهای خط انتقال تخمین زده شده و سپس با استفاده از این پارامترها و شرایط آب و هوایی خط مورد نظر، حد حرارتی به صورت آنلاین محاسبه می گردد. برای انجام فرآیند تخمین همزمان محل خطا و پارامترهای خطوط از روش حداقل مربعات غیرخطی (NLS) استفاده شده است. شبیه سازی ها در محیط نرمافزاری متلب و بر روی یک سیستم انتقال استاندارد با جبران ساز سری انجام شده است. نتایج شبیه سازی نشان می دهد که روش پیشنهادی از دقت و سرعت بالایی برخوردار بوده و می تواند نقش بسزایی در افزایش سرعت تعمیر خطوط و قابلیت اطمینان سیستم و همچنین کاهش زیانهای اجتماعی و اقتصادی داشته باشد. پرونده مقاله -
دسترسی آزاد مقاله
4 - Optimal Current Meter Placement for Accurate Fault Location Purpose using Dynamic Time Warping
K. G. Firouzjah A SheikholeslamThis paper presents a fault location technique for transmission lines with minimum current measurement. This algorithm investigates proper current ratios for fault location problem based on thevenin theory in faulty power networks and calculation of short circuit curren چکیده کاملThis paper presents a fault location technique for transmission lines with minimum current measurement. This algorithm investigates proper current ratios for fault location problem based on thevenin theory in faulty power networks and calculation of short circuit currents in each branch. These current ratios are extracted regarding lowest sensitivity on thevenin impedance variations of the network structure. Proposed algorithm compares current ratios from offline calculations with corresponding values achieved from measurements with a look-up table system. Best solution based on Dynamic Time Warping (DTW) algorithm is introduced as an output (location of the fault) which includes the line and the distance. Among many current ratios to form look-up table system, the minimum number of them will be extracted by a multi-objective optimization technique using Bees Algorithm (BA). This extraction is based on lowest possible number of buses for instruments installation and required current measurements, estimation accuracy and sensitivity degree from thevenin impedances changes. Accuracy of proposed algorithm is evaluated in a widely used multi-machine network of Western Systems Coordinating Council (WSCC). پرونده مقاله