Computer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes
محورهای موضوعی : Manufacturing process monitoring and controlJavad Shahbazi Karami 1 , Gholamhasan Payganeh 2 , Hamid Rakhodaei 3
1 - Faculty of MechanicalEngineerig, ShahidRajaee Teacher Training University, Tehran, Iran
2 - Mechanical Department, University of Birmingham, Birmingham, United Kingdom.
3 - Mechanical Department, University of Birmingham, Birmingham, United Kingdom.
کلید واژه: Tube Hydroforming, Computer Aided Design, Dual Hydroforming,
چکیده مقاله :
This paper presents a control model of the hydroforming and the dual hydroforming process of a tube. The theoretical part includes calculations to measure the change in tube thickness through the developed process. The hydroforming and the dual hydroforming processes are simulated in the SOLIDSIMULATION software and the static and the dynamic simulations are modeled. The obtained results for the T-shape and the X-shape dies are compared and investigated. Moreover, the developed software in MATLAB calculates the process parameters. The inputs of the developed software are the maximum internal pressure and the axial feed that could be adjusted with linear and non-linear functions. Furthermore, the material of the tube, as well as the tube’s parameters, such as length, thickness, and radius, must to be given to the software. However, the properties of the tube could automatically support the CAD model. The software-generated results are the applied stress, displacement, and the energy through the process. This paper deals with the control strategy model developed in thesoftware packages. The obtained results are then subsequently compared with those of several experiments.
