Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss

محورهای موضوعی : Precision manufacturing processes and systems

Alireza Bahramkia ¹ (Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran)
Mehran Fakhraie ² (Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran)
Salar Khajehpour ³ (Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran |Shiraz University of Medical Sciences)
Seyed Mohammad Tahami ⁴ (Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran |Assistant professor of Orthopedics Bone and Joint Disease Research Center, Shiraz University of Medical Sciences)
Raheb Gholami ⁵ (Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran)

تاریخ دریافت : 1401/07/27 تاریخ پذیرش : 1401/09/18 تاریخ انتشار : 1401/09/10

کلید واژه: Finite Element Method, Bone fracture, Unilateral External Bone Fixator, Bone Loss, Orthopedics,

چکیده مقاله :

Today, it is common to align broken bones using external bone fixators; ease of installation and adjustability are among the advantages of unilateral external bone fixators compared to circular and horseshoe models. The present study aimed to ensure the stability and strength of the motorized unilateral external bone fixator, equipped with four motors designed in SolidWorks software. The device was simulated and analyzed using the finite element method in Ansys software. The results were as follows: Simulation of compressive, bending, and torsional forces and reliability evaluation using the finite element method in each simulated experiment. The designed device has the necessary stability, rigidity, and desirable reliability to fix the long broken bones in place, with the possibility of displacing the bone when having a lost part. Precise bone displacement is possible since the device has four independent motorized units based on the patient's needs and the instructions of a specialist to rebuild bones.

منابع و مأخذ:

[1] Fragomen, A.T. and Rozbruch, S.R. 2007. The mechanics of external fixation. HSS Journal. 3(1):13-29.

[2] Paul, G.W. 2003. The history of external fixation. Clinics in podiatric medicine and surgery, 20(1):1-8.

[3] Hernigou, P. 2017. History of external fixation for treatment of fractures. International orthopaedics. 41(4):845-853.

[4] Fleming, B., Paley, D., Kristiansen, T. and Pope, M. 1989. A biomechanical analysis of the Ilizarov external fixator. Clinical Orthopaedics and Related Research. 241:95-105.

[5] Broekhuizen, A.H., 2000. The Stability of Orthofix External Fixation: a Comparative Evaluation. In Orthofix External Fixation in Trauma and Orthopaedics. Springer, London.

[6] Qiao, F., Li, D., Jin, Z., Hao, D., Liao, Y. and Gong, S. 2016. A novel combination of computer-assisted reduction technique and three dimensional printed patient-specific external fixator for treatment of tibial fractures. International Orthopaedics. 40(4):835-841.

[7] Wei, M., Chen, J., Guo, Y. and Sun, H. 2017. The computer-aided parallel external fixator for complex lower limb deformity correction. International Journal of Computer Assisted Radiology and Surgery.12(12):2107-2117.

[8] Corona, P.S., Vicente, M., Tetsworth, K. and Glatt, V. 2018. Preliminary results using patient-specific 3d printed models to improve preoperative planning for correction of post-traumatic tibial deformities with circular frames. Injury. 49:S51-S59.

[9] Zhao, J.X., Li, C., Ren, H., Hao, M., Zhang, L.C. and Tang, P.F. 2020. Evolution and current applications of robot-assisted fracture reduction: a comprehensive review. Annals of Biomedical Engineering. 48(1):203-224.

[10] Matsushita, T., Nakamura, K., Ohnishi, I. and Kurokawa, T. 1998. Sliding performance of unilateral external fixators for tibia. Medical Engineering & Physics. 20(1):66-69.

[11] Sangkaew, C., 2004. Distraction osteogenesis with conventional external fixator for tibial bone loss. International orthopaedics. 28(3):171-175.

[12] Hussain, S., Inam, M., Arif, M., Shabbir, M. and Ahmad, I. 2008. Limb length discrepancy in lower limb management with unilateral external fixator. Journal of Postgraduate Medical Institute. 22(4):285-291.

[13] Tang, X., Zhu, J., Li, Q., Chen, G., Fu, W. and Li, J. 2015. Knee arthrodesis using a unilateral external fixator combined with crossed cannulated screws for the treatment of end-stage tuberculosis of the knee. BMC Musculoskeletal Disorders.16 (1):1-9.

[14] Basso, M., Formica, M., Cavagnaro, L., Federici, M., Lombardi, M., Lanza, F. and Felli, L. 2017. Unilateral external fixator in the treatment of humeral shaft fractures: results of a single center retrospective study. Musculoskeletal Surgery. 101(3):237-242.

[15] Yushan, M., Ren, P., Abula, A., Alike, Y., Abulaiti, A., Ma, C. and Yusufu, A. 2020. Bifocal or trifocal (double‐level) bone transport using unilateral rail system in the treatment of large tibial defects caused by infection: a retrospective study. Orthopaedic Surgery. 12(1):184-193.

[16] Sen, C., Akgül, T., Tetsworth, K.D., Balci, H.I., Yildiz, F. and Necmettin, T. 2020. Combined Technique for the Treatment of Infected Nonunions of the Distal Femur With Bone Loss: Short Supracondylar Nail–Augmented Acute Shortening/Lengthening. Journal of orthopaedic trauma. 34(9):476-481.

[17] Strebe, S., Kim, H., Russell, J.P., Hsieh, A.H., Nascone, J. and O’Toole, R.V. 2014. Analysis of strategies to increase external fixator stiffness: Is double stacking worth the cost? Injury. 45(7):1049-1053.

[18] Ang, B.F.H., Chen, J.Y., Yew, A.K.S., Chua, S.K., Chou, S.M., Chia, S.L., Koh, J.S.B. and Howe, T.S. 2017. Externalised locking compression plate as an alternative to the unilateral external fixator: a biomechanical comparative study of axial and torsional stiffness. Bone & Joint Research. 6(4): 216-223.

[19] Li, J., Zhao, X., Tao, C. and Ji, R. 2018. Investigate of the influence of pin deviation on the biomechanical environment of fixator-bone system by finite element method. Vibroengineering Procedia. 20:128-133.

[20] Zainudin, N.A. and Ramlee, M.H. 2019. In Silico of the Different Pin Size of Unilateral Tibia External Fixator: A Pilot Study. EC Orthopaedics. 10:07-10.

[21] Shi, D., Liu, K., Zhang, H., Wang, X., Li, G. and Zheng, L. 2020. Investigating the biomechanical function of the plate-type external fixator in the treatment of tibial fractures: a biomechanical study. BMC Musculoskeletal Disorders. 21(1):1-9.

[22] Kouassi, K.J.E., Cartiaux, O., Fonkoué, L., Detrembleur, C. and Cornu, O. 2020. Biomechanical study of a low-cost external fixator for diaphyseal fractures of long bones. Journal of Orthopaedic Surgery and Research. 15(1):1-8.

[23] Lesniewska, A., Choromanski, W., Deszczynski, J. and Dobrzynski, G. 2006, January. Modeling and simulation of physical performance of a external unilateral mechatronic orthopaedic fixator-Bone system. International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE.

[24] Donaldson, F.E., Pankaj, P. and Simpson, A.H.R. 2012. Bone properties affect loosening of half-pin external fixators at the pin–bone interface. Injury. 43(10):1764-1770.

[25] Roseiro, L. and Neto, A. 2013. Optimal Configuration of Uniplanar-Unilateral External Fixators in Tibia Fractures. In Computational Intelligence and Decision Making. Springer, Dordrecht.

[26] Wang, X.K., Ye, J.D., Gu, F.S., Wang, A.G., Zhang, C.Q., Tian, Q.Q., Li, X. and Dong, L.M. 2014. Numerical simulation research to both the external fixation surgery scheme of intertrochanteric fracture and the healing process, and its clinical application. Bio-medical materials and engineering. 24(1):625-632.

[27] Li, J., Zhao, X., Hu, X., Tao, C. and Ji, R. 2018. A theoretical analysis and finite element simulation of fixator–bone system stiffness on healing progression. Journal of Applied Biomaterials & Functional Materials. 16(3):115-125.

[28] Salunkhe, V.G., Gajakosh, A.K., Jinaga, R. and Thimmaiah, J. 2019. March. Design and finite element analysis of external fixator used in orthopaedics. In AIP Conference Proceedings (Vol. 2080, No. 1, p. 040002). AIP Publishing LLC.

[29] Pervan, N., Mešić, E., Muminović, A.J., Delić, M. and Muratović, E. 2022. Stiffness Analysis of the External Fixation System at Axial Pressure Load. Advances in Science and Technology Research Journal. 16(3):226-233.

[30] Pervan, N., Muminović, A. J., Mešić, E., Delić, M. and Muratović, E. 2022. Analysis of Mechanical Stability for External Fixation Device in the Case of Anterior-Posterior Bending. Advances in Science and Technology Research Journal. 16(3):136-142.

[31] Elmedin, M., Vahid, A., Nedim, P., & Nedžad, R. 2015. Finite element analysis and experimental testing of stiffness of the Sarafix external fixator. Procedia Engineering. 100:1598-1607.

[32] Bahramkia, A., Fakhraie, M., Khajehpour, S., Tahami, S. M., & Gholami, R. 2022. Investigating the stability of motorized unilateral external bone fixators to recover the destroyed bones in dynamic mode using the finite element simulation. Iranian Journal of Manufacturing Engineering. 9(4): 24-35.