Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017
محورهای موضوعی : Metal FormingFarshid Ahmadi 1 , Hadi Mansouri 2 , Elyas Sarami Foroushani 3
1 - Department of Mechanical Engineering, University of Kashan, Kashan 8731753153, Iran
2 - Department of Mechanical Engineering, University of Kashan, Kashan 8731753153, Iran
3 - Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
کلید واژه: Severe Plastic Deformation, Equal Channel Angular Pressing, Temperature Gradient, AA2017 Alloy,
چکیده مقاله :
In recent years, processes known as severe plastic deformation (SPD) have been devised to create fine-grained materials. Among these processes, equal channel angular pressing (ECAP) has been more favored than other methods due to its high efficiency, simplicity, and industrial production potential. This study aimed to investigate the sample temperature gradient during the ECAP process. For this purpose, a Taguchi experiment with influencing factors on AA2017 alloy was designed and a relationship was obtained to predict sample surface temperature. Experiments were carried out using grease, graphite powder, and MoS2 lubricants, along with routes A, BC, BA, and C. The surface temperature of the sample was measured using a laser thermometer. A finite element model was compared with the experimental conditions, and the simulation and experimental results of surface temperature were verified with an error of about 1.9%. In experiments, it was found that speed and lubricant had a significant effect on sample temperature during the process. The simulation results showed that decreasing the die angle resulted in a significant increase in temperature. Following the validation of the FEM model, the temperature gradient and distribution in the middle of the sample, wherein practical experiments could not be measured, were also investigated.
[1] Segal, V., Reznikov, V., Dobryshevshiy, A. and Kopylov, V. 1981. Plastic working of metals by simple shear. Russian Metallurgy (Metally). 1(1): 99-105.
[2] Valiev R.Z., Zhilyaev, A.P. and Langdon, T.G. 2014. Bulk Nanostructured Materials: Fundamentals and Applications. New Jersey: John Wiley & Sons.
[3] Ferrasse, S., Segal V.M., Alford, F., Kardokus, J. and Strothers S. 2008. Scale up and application of equal-channel angular extrusion for the electronics and aerospace industries. Materials Science and Engineering: A. 493(1): 130-140.
[4] Segal, V.M. 1999. Equal channel angular extrusion: From micromechanics to structure formation. Materials Science and Engineering. A. 271(1): 322-333.
[5] Sklenicka, V., Dvorak, J., Kvapilova, M., Svoboda, M. and Kral, P. 2012. Equal-channel angular pressing and creep in ultrafine-grained aluminium and its alloys. Rijeka: Intech Open Access Publisher,
[6] Segal, V.M., Hartwig, K.T. and Goforth, R. 1997. In situ composites processed by simple shear. Materials Science and Engineering. A. 224(1): 107-115.
[7] Segal, V.M. 1995. Materials processing by simple shear. Materials Science and Engineering: A. 197(2): 157-164.
[8] V.M, Segal. 2002. Severe plastic deformation: Simple shear versus pure shear. Materials Science and Engineering: A. 338(1): 331-344.
[9] Segal, V.M. 2005. Deformation mode and plastic flow in ultra fine grained metals. Materials Science and Engineering: A. 406(1): 205-216.
[10] Suzuki, T., Vinogradov, A. and Hashimoto, S. 2004. Strength enhancement and deformation behavior of gold after equal-channel angular pressing. Materials transactions. 45(7): 2200-2208.
[11] Vinogradov, A., Maruyama, M., Kaneko, Y. and Hashimoto, S. 2012. Effect of dislocation hardening on monotonic and cyclic strength of severely deformed copper. Philosophical Magazine. 92(6): 666-689.
[12] Azushima, A., Kopp, R., Korhonen, A., Yang, D.-Y., Micari, F., Lahoti, G., Groche, P., Yanagimoto, J., Tsuji, N. and Rosochowski, A. 2008. Severe plastic deformation (spd) processes for metals. CIRP annals. 57(2): 716-735.
[13] Mc Nelley, T.R., Swisher, D.L., Horita, Z. and Langdon, T.G. 2002. Influence of processing route on microstructure and grain boundary development during equal-channel angular pressing of pure aluminum. Proceeding of ultra fine grained materials II. Seattle, U.S.
[14] Neshastegir Kashi, A. and Ahmadi, F. 2021. The effect of ECAP die helix angle on the microstructure homogeneity of the processed samples by fem method. Journal of Modern Processes in Manufacturing and Production. 10(2): 27-39.
[15] Shahsavari, M.H. and Ahmadi, F. 2015. Evolution of texture and grain size during equal channel angular extrusion of pure copper and 6012 aluminum. Journal of Modern Processes in Manufacturing and Production. 4(4): 47-58.
[16] Shahsavari, M.H. and Ahmadi, F. 2014. Comparison of hardness values of various specimens with different geometries and material properties after ECAP. Journal of Modern Processes in Manufacturing and Production. 3(3): 61-78.
[17] Sahai, A., Sharma, S.S. and Dwivedi, S.N. 2021. Deformation of al alloy during integrated extrusion and ECAP: A simulation research. Journal of Modern Processes in Manufacturing and Production. 10(3): 35-44.
[18] Ahmadi, F. and Farzin, M. 2014. Investigation of a new route for equal channel angular pressing process using three-dimensional finite element method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 228(7): 765-774.
[19] Guo, T.B., Cao, J., Ding, Y.T. and Jia, Z. 2016. Numerical and experimental study of temperature rise effect on copper during equal channel angular pressing. Materials Science Forum. 850(2): 864-870.
[20] Biswas, S., Brokmeier, H.-G., Fundenberger, J.-J. and Suwas, S. 2015. Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium. Materials Characterization. 102: 98-102.
[21] Miaoquan, L., Zhang, C., Luo, J. and Mingway, F. 2010. Thermomechanical coupling simulation and experimental study in the isothermal ECAP processing of ti-6al-4v alloy. Rare Metals. 29(6): 613-620.
[22] Kim, H.S. 2009. Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method. Materials Science and Engineering: A. 503(1): 130-136.
[23] Jiang, H., Fan, Z. and Xie, C. 2009. Finite element analysis of temperature rise in cp–ti during equal channel angular extrusion. Materials Science and Engineering: A. 513: 109-114.
[24] Pei, O., Hu, B.H., Lu, C. and Wang, Y.Y. 2003. A finite element study of the temperature rise during equal channel angular pressing. Scripta Materialia. 49(4): 303-308.
[25] Ahmadi, F. and Farzin, M. 2014. Finite element analysis of ultrasonic-assisted equal channel angular pressing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 228(11): 1859-1868.
[26] Johnson, G.R. and Cook, W.H. 1985. Racture characteristics of three metals subjected to various strains, strain rates, temperatures and pressure. Engineering fracture mechanics. 21(1): 31-48.
[27] Johnson, G.R. and Cook, W.H. 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on Ballistics. Netherlands.
[28] Milani, A., Dabboussi, W., Nemes, J.A. and Abeyaratne, R. 2009. An improved multi-objective identification of johnson–cook material parameters. International journal of impact engineering. 36(2): 294-302.
[29] Committee, A. I. H. 2013. ASM Handbook. Volume 4A: steel heat treating fundamentals and processes, Ohio: ASM international.
[30] Sanusi, K.O., Makinde, O.D. and Oliver, G.J. 2012. Equal channel angular pressing technique for the formation of ultra-fine grained structures. South African Journal of Science. 108(9): 1-7.
[31] Committee, A.I.H. 1992. Properties and selection: Nonferrous alloys and special-purpose materials. ASM international, Ohio, U. S.
