Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method
محورهای موضوعی : Metal Forming
Mostafa Akbari
1
(Department of Automotive, Technical and Vocational University (TVU), Tehran, Iran)
Parviz Asadi
2
(Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran)
Hossein Rahimi Asiabaraki
3
(Department of Automotive, Technical and Vocational University (TVU), Tehran, Iran)
کلید واژه: Microstructure, FSP, Pin Shape, Piston Alloy,
چکیده مقاله :
Al-Si alloys are widely used in the manufacture of automotive parts such as pistons and cylinders. Although it has desired properties for use in pistons, some microstructural properties of this alloy, such as dendrites or the presence of needle-like silicones, reduce the performance of the parts produced. In this research, to modify the microstructural properties and thus improve the mechanical properties of the alloy, the friction stir processing (FSP) method is used. Also, the effect of process parameters such as rotational and traverse speeds as well as the shape of the pin on the microstructural and mechanical properties of the samples, are studied. The results show that the FSP process improves the microstructural properties of the base metal, and thus improves its mechanical properties. Furthermore, by increasing the rotational speed or decreasing the traverse speed of the tool, the silicon particles become finer, and consequently, the microstructural properties are improved.
[1] Akbari, M., Khalkhali, A., Keshavarz, S.M.E. and Sarikhani, E. 2016. The effect of in-process cooling conditions on temperature, force, wear resistance, microstructural, and mechanical properties of friction stir processed a356. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 232(5): 429-437.
[2] Rafieazad, M., Mohammadi, M., Gerlich, A. and Nasiri, A. 2021. Enhancing the corrosion properties of additively manufactured alsi10mg using friction stir processing. Corrosion Science. 178: 109073.
[3] Mehrian, S.S.M., Rahsepar, M., Khodabakhshi, F. and Gerlich, A.P. 2021. Effects of friction stir processing on the microstructure, mechanical and corrosion behaviors of an aluminum-magnesium alloy. Surface and Coatings Technology. 405: 126647.
[4] Ajay Kumar, P., Madhu, H.C., Pariyar, A., Perugu, C.S., Kailas, S.V., Garg, U. and Rohatgi, P. 2020. Friction stir processing of squeeze cast a356 with surface compacted graphene nanoplatelets (gnps) for the synthesis of metal matrix composites. Materials Science and Engineering: A. 769:138517.
[5] Ma, L., Zhou, C., Shi, Y., Cui, Q., Ji, S. and Yang, K. 2021. Grain-refinement and mechanical properties optimisation of a356 casting al by ultrasonic-assisted friction stir processing. Metals and Materials International.Published online:https://doi.org/10.1007/s12540-020-00952-x.
[6] Akbari, M. and Asadi, P. 2020. Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled eulerian–lagrangian method with experimental verifications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 234(8): 1117-1128.
[7] Akbari, M., Asadi, P. and Behnagh, R.A. 2021. Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled eulerian and lagrangian method. The International Journal of Advanced Manufacturing Technology. 113(3): 721-734.
[8] Asadi, P., Akbari, M., Besharati Givi, M.K. and Shariat Panahi, M. 2015. Optimization of az91 friction stir welding parameters using taguchi method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications.Published online:https://doi.org/10.1177/1464420715570987
[9] Cheng, W., Liu, C.Y. and Ge, Z.J. 2021. Optimizing the mechanical properties of al–si alloys through friction stir processing and rolling. Materials Science and Engineering: A. 804: 140786.
[10] Charandabi, F.K., Jafarian, H.R., Mahdavi, S., Javaheri, V. and Heidarzadeh, A. 2021. Modification of microstructure, hardness, and wear characteristics of an automotive-grade al-si alloy after friction stir processing. Journal of Adhesion Science and Technology. Published online: https://doi.org/10.1080/01694243.2021.1898858.
[11] Akbari, M., Shojaeefard, M.H., Asadi, P. and Khalkhali, A. 2017. Hybrid multi-objective optimization of microstructural and mechanical properties of b4c/a356 composites fabricated by fsp using topsis and modified nsga-ii. Transactions of Nonferrous Metals Society of China. 27(11): 2317-2333.
[12] Akbari, M. and Asadi, P. 2020. Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled eulerian–lagrangian method with experimental verifications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 234 (8): 1117-1128
[13] Akbari, M. and Asadi, P. 2021. Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using taguchi method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online: https://doi.org/10.1177/14644207211032992
[14] Akbari, M., Khalkhali, A., Keshavarz, S.M.E. and Sarikhani, E. 2015. Investigation of the effect of friction stir processing parameters on temperature and forces of al–si aluminum alloys. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 232(3): 213-229.
[15] Akbari, M., Shojaeefard, M.H., Asadi, P. and Khalkhali, A. 2017. Wear performance of a356 matrix composites reinforced with different types of reinforcing particles. J. of Materi Eng and Perform. 26(9): 4297-4310.
[16] Ma, Z.Y., Sharma, S.R. and Mishra, R.S. 2006. Effect of friction stir processing on the microstructure of cast A356 aluminum. Materials Science and Engineering: A. 433(1): 269-278.
