Effects of Shot Peening Angle and Time on Microstructure and Wear Behavior of AZ31 Alloy

محورهای موضوعی : Tribology and wear issues in manufacturing processes

Seyyed Nabi Al-din Sharifi-Shirmardi ¹ , Reza Abedinzadeh ²

1 - Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran
2 - Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran

تاریخ دریافت : 1402/04/26 تاریخ پذیرش : 1402/05/21 تاریخ انتشار : 1402/02/11

کلید واژه: Shot Peening, Wear, AZ31 Alloy, Peening Angle, Peening Time,

چکیده مقاله :

This study evaluated the effects of peening angle and time on the microstructure and wear behavior of AZ31 alloy subjected to the shot peening process. The samples were shot peened at 30° and 45° for 20 and 80 min with steel pellets. The microstructures and grain sizes of the shot peened samples were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, the samples were characterized through hardness and wear measurements. The results showed that shot peening time had a greater effect on grain refining than shot peening angle. In addition, the hardness was increased to 206% for the sample shot peened at 45° for 80 min. This can be ascribed to reduced grain sizes on the surface (crystallite size of 169 Å) and increased micro-strains. The wear test revealed that the wear resistance of the sample was increased with increasing the peening angle and time. Furthermore, the mechanisms of adhesive and abrasive wear were observed for untreated and shot-peened specimens.

منابع و مأخذ:

[1] Kailasanathan, C., Rajkumar, P., Rajini, N., Sivakumar, G., Ramesh, T., Ismail, S.O., Mohammad, F. and Al-Lohedan, H.A. 2021. Characterization and optimization of influence of MoS₂ hybridization on tribological behaviours of Mg–B₄C composites.  Bulletin of Materials Science. 44(3): 1-18.

[2] Friedrich, H.E. and Mordike, B.L. 2006. Magnesium Technology (Metallurgy, Design Data, Applications). Springer.

[3] Rai, P., Chaturvedi, R.K., Mishra, A., Kumar, V. and Singh, V.K. 2020. To develop biodegradable mg-based metal ceramic composites as bone implant material.  Bulletin of Materials Science. 43(1): 1-6.

[4] Zheng, H., Guo, S.-h., Luo, Q., Shu, X. and Li, G. 2019. Effect of shot peening on microstructure, nanocrystallization and microhardness of Ti–10V–2Fe–3Al alloy surface.  Journal of Iron and Steel Research International. 26(1): 52-58.

[5] Feng, X., Xie, J., Xue, W., Shen, Y., Wang, H. and Liu, Z. 2019. Microstructure and nanoindentation hardness of shot-peened ultrafine-grained low-alloy steel.  Journal of Iron and Steel Research International. 26(5): 472-482.

[6] Valiev, R. 2004. Nanostructuring of metals by severe plastic deformation for advanced properties.  Nature materials. 3(8): 511-516.

[7] Meng, X., Duan, M., Luo, L., Zhan, D., Jin, B., Jin, Y., Rao, X., Liu, Y. and Lu, J. 2017. The deformation behavior of az31 mg alloy with surface mechanical attrition treatment.  Materials Science and Engineering: A. 707: 636-646.

[8] Xia, S., Liu, Y., Fu, D., Jin, B. and Lu, J. 2016. Effect of surface mechanical attrition treatment on tribological behavior of the AZ31 alloy.  Journal of Materials Science & Technology. 32(12): 1245-1252.

[9] Xu, J., Wang, X., Zhu, X., Shirooyeh, M., Wongsa-Ngam, J., Shan, D., Guo, B. and Langdon, T.G. 2013. Dry sliding wear of an AZ31 magnesium alloy processed by equal-channel angular pressing.  Journal of Materials Science. 48(11): 4117-4127.

[10] Gopi, K.R. and Nayaka, H.S. 2017. Tribological and corrosion properties of am70 magnesium alloy processed by equal channel angular pressing.  Journal of Materials Research. 32(11): 2153-2160.

[11] Seenuvasaperumal, P., Doi, K., Basha, D.A., Singh, A., Elayaperumal, A. and Tsuchiya, K. 2018. Wear behavior of hpt processed UFG AZ31b magnesium alloy.  Materials Letters. 227: 194-198.

[12] Sun, H., Shi, Y. and Zhang, M. 2008. Wear behaviour of AZ91D magnesium alloy with a nanocrystalline surface layer.  Surface and Coatings Technology. 202(13): 2859-2864.

[13] Ge, M.-Z., Xiang, J.-Y., Tang, Y., Ye, X., Fan, Z., Lu, Y. and Zhang, X. 2018. Wear behavior of Mg-3Al-1Zn alloy subjected to laser shock peening.  Surface and Coatings Technology. 337: 501-509.

[14] Zhang, J., Jian, Y., Zhao, X., Meng, D., Pan, F. and Han, Q. 2021. The tribological behavior of a surface-nanocrystallized magnesium alloy AZ31 sheet after ultrasonic shot peening treatment.  Journal of Magnesium and Alloys. 9(4): 1187-1200.

[15] Jamalian, M. and Field, D.P. 2019. Effects of shot peening parameters on gradient microstructure and mechanical properties of trc AZ31.  Materials Characterization. 148: 9-16.

[16] Xu, C., Sheng, G., Wang, H., Jiao, Y. and Yuan, X. 2017. Effect of high energy shot peening on the microstructure and mechanical properties of Mg/Ti joints.  Journal of Alloys and Compounds. 695: 1383-1391.

[17] Liu, C., Zheng, H., Gu, X., Jiang, B. and Liang, J. 2019. Effect of severe shot peening on corrosion behavior of AZ31 and AZ91 magnesium alloys.  Journal of Alloys and Compounds. 770: 500-506.

[18] Bagherifard, S., Hickey, D.J., Fintová, S., Pastorek, F., Fernandez-Pariente, I., Bandini, M., Webster, T.J. and Guagliano, M. 2018. Effects of nanofeatures induced by severe shot peening (ssp) on mechanical, corrosion and cytocompatibility properties of magnesium alloy az31.  Acta biomaterialia. 66: 93-108.

[19] Dharani Kumar, S. and Suresh Kumar, S. 2022. Effect of shot peening on the ballistic performance of friction stir welded magnesium alloy (AZ31B) joints.  Journal of Materials Engineering and Performance.  31: 10294–10303.

[20] Haghighi, O., Amini, K. and Gharavi, F. 2020. Effect of shot peening operation on the microstructure and wear behavior of az31 magnesium alloy.  Protection of Metals and Physical Chemistry of Surfaces. 56: 164-168.

[21] Srinivasan, M., Loganathan, C., Kamaraj, M., Nguyen, Q., Gupta, M. and Narayanasamy, R. 2012. Sliding wear behaviour of AZ31b magnesium alloy and nano-composite.  Transactions of Nonferrous Metals Society of China. 22(1): 60-65.

[22] Fouad, Y. and El Batanouny, M. 2011. Effect of surface treatment on wear behavior of magnesium alloy AZ31.  Alexandria Engineering Journal. 50(1): 19-22.