Improvement of LVRT Capability of Wind Farms by Using SMES and R-Type BFCL
محورهای موضوعی : Electrical EngineeringMasoud ‎ Radmehr‎ 1 , Seyyedeh Maral Moharreri koushalshah 2
1 - Department of Electrical Engineering, Aliabad Katoul Branch, Islamic Azad University, Aliabad Katoul, Iran
2 - Department of Electrical Engineering, Aliabad Katoul Branch, Islamic Azad University, Aliabad Katoul, Iran
کلید واژه: Superconducting Magnetic Energy Storage (SMES), Low-Voltage Ride-Through (LVRT), Solid-state Fault Current Limiter(SSFCL) Wind Farms (WFs),
چکیده مقاله :
Fulfillment the Low-voltage ride-through (LVRT) is required for wind farms (WFs) connected to the power system. This paper proposes simultaneous using both superconducting magnetic energy storage (SMES) and R-type solid-state fault current limiter (SSFCL) for enhancement the LVRT capability of WFs. The WFs is modeled with a doubly-fed induction generator (DFIG). The drive-train system is modeled by two-mass drive system. The analytical and simulation studies of using both SCES and R-type SSFCL for improving the LVRT capability of WFs are presented and compared with the impact of the Using the SMES alone. The simulation results show that simultaneous using both SCES and SSFCL effectively improves the LVRT capability of WFs connected to weak grids. Simulation were performed in PSCAD/EMTDC software environment.
[1] GWEC. (2010,October)” Global wind energy outlook 2010,” in Global Wind Energy Council Report[Online]. Available: http://www.gwec.net.
[2] S. M. Muyeen, R. Takahashi, T. Murata, and J. Tamura, “A variable speed wind turbine control strategy to meet wind farm grid code requirements,” IEEE Transactions on power system., Vol. 25, No. 1, PP. 331–340, Feb. 2010.
[3] M. Tsili and S. Papathanassiou, “A Review of Grid Code Technical Requirements for Wind Farms,” IET Renewable Power Generation, Vol. 3, No. 12, pp. 308–332, Sep 2009.
[4] S. Tohidi, B. M. Ivatloo, "A comprehensive review of low voltage ride through of doubly fed induction wind generators", Renewable and Sustainable Energy Reviews, Vol. 57, pp. 412-419, May 2016.
[5] K.C. Divya, P.S. N. Rao, “Study of dynamic behavior of grid connected induction generator,” IEEE Power Engineering Society General Meeting, 6-10 June 2004, vol.2, pp. 2200-2205
[6] R. C´ardenas, R. Pe˜na, S. Alepuz, and G. Asher, “Overview of control systems for the operation of DFIGs in wind energy applications,” IEEE Transaction Industrial Electronic, Vol. 60, No. 7, pp. 2776–2798, Jul. 2013
[7] L. Wang and D.-N. Truong, “Stability enhancement of DFIG-based offshore wind farm fed to a multi-machine system using a STATCOM,”IEEE Trans. Power Syst., vol. 28, no. 3, pp. 2882–2889, Aug. 2013.
[8] M. Firouzi, G. B. Gharehpetian, S. B. Mozafari, "Application of UIPC to improve power system stability and LVRT capability of SCIG-based wind farms" IET Generation, Transmission & Distribution, Vol. 11, No. 9, pp.2314-2322, Jul. 2017
[9] M. Firouzi, G. B. Gharehpetian, Y. Salami," Active and reactive power control of wind farm for enhancement transient stability of multi-machine power system using UIPC" IET Renewable Power Generation, Vol. 11, No. 8, pp.1246-1252, 2017
[10] Ch. Wessels, F. Gebhardt, F. W. Fuchs ,“ Fault Ride-Through of a DFIG Wind Turbine Using a Dynamic Voltage Restorer During Symmetrical and Asymmetrical Grid Faults ,” IEEE Transactions on Power Electronics, Vol. 26, No. 3, pp. 807-815, Feb. 2017.
[11] Kh. Goweily, M. Sh. El Moursi, M. Abdel-Rahman, M. A. L. Badr," Voltage booster scheme for enhancing the fault ride-through of wind turbines "IET Power Electronics, Vol. 8, No. 10, pp. 1853-1863, 2015
[12] J. Yang, J. Fletcher, and J. O’Reilly, “A series-dynamic-resistor-based converter protection scheme for doubly-fed induction generator during various fault conditions,” IEEE Trans. Energy Convers., vol. 25, no. 2, pp. 422–432, Jun. 2010.
[13] C. Abbey and G. Joos, “Supercapacitor energy storage for wind energy applications,” IEEE Transactions on Industry Applications, vol. 43, no. 3, pp. 763–776, 2007
[14] A. Yazdani, “Islanded operation of a doubly-fed induction generator (DFIG) wind-power system with integrated energy storage,” in Proceedings of the 2007 IEEE Canada Electrical Power Conference, EPC 2007, pp. 153–159, Montreal, Canada, October 2007
[15] G. Rashid, and M. H. Ali, “Transient Stability Enhancement of Double Fed Induction Machine Based Wind Generator by Bridge-Type Fault Current Limiter,” IEEE Transactions on Energy Conversion , Vol. 30, No. 3, 2015
[16] M. E. Elshiekh, D. E. A. Mansour, and A. M. Azmy, “Improving fault ride-through capability of DFIG-based wind turbine using superconducting fault current limiter,” IEEE Trans. Appl. Supercond.,Vol. 23, no. 3, Jun. 2013, Art. ID. 5601204.
[17] Chen, L.; Deng, C.; Zheng, F.; Li, S.; Liu, Y.; Liao, Y. Fault ride-through capability enhancement of DFIG-based wind turbine with a flux-coupling-type SFCL employed at different locations. IEEE Trans. Appl. Supercond. 2015, 25, Art. no. 5201505.
[18] G. Rashid and M. Hasan Ali, “Bridge-type fault current limiter for asymmetric fault ride-through capacity enhancement of doubly fed induction machine based wind generator,” in Proc. IEEE Energy Convers. Congr. Expo., Sep. 2014, pp. 1903–1910.
[19] Salami “Dynamic performance of wind farms with bridge-type superconducting fault current limiter in distribution grid,” in Proc. 2nd Int. Conf. Elect. Power Energy Convers. Syst., 2011,pp. 1–6.
[20] M. Firouzi and G. B. Gharehpetian, “Improving Fault Ride-Through Capability of Fixed-Speed Wind Turbine by Using Bridge-Type Fault Current Limiter,” IEEE Transactions on Energy Conversion, Vol. 28, No. 2, pp. 361–369, 2013.
[21] N. G. Hingorani, “High power electronics and flexible AC transmission system,” IEEE. Power Engineering Review, pp. 3-4, july 1998
