چکیده مقاله :
The aim of this study is to investigate the application of polypyrrole/ polyaniline (PPy/PANI) nanofiber for Cu (II) sorption from paper mill wastewater. The tests and their optimization results were based on the experiments design in three levels of variables using Taguchi method. The results showed that in Copper removal tests, the pH of the solution was the most effective parameter of the sorption process and the highest Copper removal rate was achieved in acid conditions. The adsorbent mass and contact time also had considerable effect (less than pH) on Copper removal in the Taguchi method. The effect of temperature on the sorption process was also studied and results showed that the temperature improved the Copper sorption. The adsorption percentage increased with the rise in temperature from 20 to 40 °C .The calculated amounts of thermodynamic parameters such as ∆H°(55.33KJ/mol) , ∆S°(0.209KJ/molK) and ∆G°(-7.4 ,-8.87,-11.31KJ/mol) showed that the adsorption of Copper on to nanofiber was feasible spontaneous and endothermic.
منابع و مأخذ:
1. Tizaoui C, Rachmawati SD, Hilal N. The removal of copper in water using manganese activated saturated and unsaturated sand filters. Chemical Engineering Journal. 2012;209:334-44.
2. Wang S, Li L, Zhu ZH. Solid-state conversion of fly ash to effective adsorbents for Cu removal from wastewater. Journal of Hazardous Materials. 2007;139(2):254-9.
3. Z. Khazheeva, S. Urbazaeva, N. Bodoev, L. Radnaeva, Y. O. Kalinin, Heavy metals in the water and bottom sediments of the Selenga River Delta. Water Resources 31, 64-67 (2004). doi:10.1016/j.cej.2009.02.038
4. Khansorthong S, Hunsom M. Remediation of wastewater from pulp and paper mill industry by the electrochemical technique. Chemical Engineering Journal. 2009;151(1-3):228-34.
5. Zhou L-C, Li Y-F, Bai X, Zhao G-H. Use of microorganisms immobilized on composite polyurethane foam to remove Cu(II) from aqueous solution. Journal of Hazardous Materials. 2009;167(1-3):1106-13.
6. Sarioglu M, Güler UA, Beyazit N. Removal of copper from aqueous solutions using biosolids. Desalination. 2009;239(1-3):167-74.
7. Ferrah N, Abderrahim O, Didi MA, Villemin D. Removal of copper ions from aqueous solutions by a new sorbent: Polyethyleneiminemethylene phosphonic acid. Desalination. 2011;269(1-3):17-24.
8. Karakışla M. The adsorption of Cu(II) ion from aqueous solution upon acrylic acid grafted poly(ethylene terephthalate) fibers. Journal of Applied Polymer Science. 2003;87(8):1216-20.
9. Wang H, Liu Y, Deng Z, Han S. Preparation of Fe3O4/poly(l-glutamic acid) microspheres and their adsorption of Cu(II) ions. Journal of Applied Polymer Science. 2016;133(35).
10. Rahbar N, Yazdanpanah H, Ramezani Z, Shushizadeh MR, Enayat M, Mansourzadeh M. Comparative and competitive adsorption of Cu(II), Cd(II) and Pb(II) onto Sepia pharaonis endoskeleton biomass from aqueous solutions. Water and Environment Journal. 2017;32(2):209-16.
11. Mukhopadhyay M, Noronha S, Suraishkumar G. Kinetic modeling for the biosorption of copper by pretreated Aspergillus niger biomass. Bioresource Technology. 2007;98(9):1781-7.
12. Liu C, Bai R. Adsorptive removal of copper ions with highly porous chitosan/cellulose acetate blend hollow fiber membranes. Journal of Membrane Science. 2006;284(1-2):313-22.
13. Kim SJ, Park YG, Moon H. Removal of copper ions by a cation-exchange resin in a semifluidized bed. Korean Journal of Chemical Engineering. 1998;15(4):417-22.
14. Chen A-l, Qiu G-z, Zhao Z-w, Sun P-m, Yu R-l. Removal of copper from nickel anode electrolyte through ion exchange. Transactions of Nonferrous Metals Society of China. 2009;19(1):253-8.
15. Nadaroglu H, Kalkan E, Demir N. Removal of copper from aqueous solution using red mud. Desalination. 2010;251(1-3):90-5.
16. Nishizawa M, Matsue T, Uchida I. Fabrication of a pH-sensitive microarray electrode and applicability to biosensors. Sensors and Actuators B: Chemical. 1993;13(1-3):53-6.
17. Saoudi B, Jammul N, Abel M-L, Chehimi MM, Dodin G. DNA adsorption onto conducting polypyrrole. Synthetic Metals. 1997;87(2):97-103.
18. Zhang X, Bai. Surface Electric Properties of Polypyrrole in Aqueous Solutions. Langmuir. 2003;19(26):10703-9.
19. Deng S, Ting YP. Polyethylenimine-Modified Fungal Biomass as a High-Capacity Biosorbent for Cr(VI) Anions: Sorption Capacity and Uptake Mechanisms. Environmental Science & Technology. 2005;39(21):8490-6.
20. Weidlich C, Mangold KM, Jüttner K. Conducting polymers as ion-exchangers for water purification. Electrochimica Acta. 2001;47(5):741-5.
21. M. Ghorbani, H. Esfandian, N. Taghipour and R. Katal, Desalination., 263, 279-284 (2010).doi: 10.1016/j.desal.2010.06.072.
22. Naghizadeh A, Mousavi SJ, Derakhshani E, Kamranifar M, Sharifi SM. Fabrication of polypyrrole composite on perlite zeolite surface and its application for removal of copper from wood and paper factories wastewater. Korean Journal of Chemical Engineering. 2018;35(3):662-70.
23. Wong S, Teng T, Ahmad A, Zuhairi A, Najafpour G. Treatment of pulp and paper mill wastewater by polyacrylamide (PAM) in polymer induced flocculation. Journal of Hazardous Materials. 2006;135(1-3):378-88.
24. Bhaumik M, Maity A, Srinivasu VV, Onyango MS. Removal of hexavalent chromium from aqueous solution using polypyrrole-polyaniline nanofibers. Chemical Engineering Journal. 2012;181-182:323-33.
25.J. Antony, D. Perry, C. Wang, and M. Kumar, Assembly. Autom., 26, 18-24 (2006).
26. Maity A, Sinha Ray S. Highly Conductive Core-Shell Nanocomposite of Poly(N-vinylcarbazole)-Polypyrrole with Multiwalled Carbon Nanotubes. Macromolecular Rapid Communications. 2008;29(19):1582-7.
27. Xu P, Han X, Wang C, Zhang B, Wang X, Wang H-L. Facile Synthesis of Polyaniline-Polypyrrole Nanofibers for Application in Chemical Deposition of Metal Nanoparticles. Macromolecular Rapid Communications. 2008;29(16):1392-7.
28. Edrissi M, Norouzbeigi R. Taguchi Optimization for Combustion Synthesis of Aluminum Oxide Nano-particles. Chinese Journal of Chemistry. 2008;26(8):1401-6.
29. Das AK, Saha S, Pal A, Maji SK. Surfactant-modified alumina: An efficient adsorbent for malachite green removal from water environment. Journal of Environmental Science and Health, Part A. 2009;44(9):896-905.
30. R. K. Roy, Design of experiments using the Taguchi approach: 16 steps to product and process improvement. (John Wiley & Sons, 2001).
31. Wang CM, Wu H, Chung SL. Optimization of experimental conditions based on Taguchi robust design for the preparation of nano-sized TiO2 particles by solution combustion method. Journal of Porous Materials. 2006;13(3-4):307-14.
32. Alizadeh B, Ghorbani M, Salehi MA. Application of polyrhodanine modified multi-walled carbon nanotubes for high efficiency removal of Pb(II) from aqueous solution. Journal of Molecular Liquids. 2016;220:142-9.
33. Kosa SA, Al-Zhrani G, Abdel Salam M. Removal of heavy metals from aqueous solutions by multi-walled carbon nanotubes modified with 8-hydroxyquinoline. Chemical Engineering Journal. 2012;181-182:159-68.
34. Zahedi R, Dabbagh R, Ghafourian H, Behbahanini A. Nickel removal by Nymphaea alba leaves and effect of leaves treatment on the sorption capacity: A kinetic and thermodynamic study. Water Resources. 2015;42(5):690-8.
