Removal of methylene blue using polyacrylic acid/ octavinyl polyhedral oligomeric silsesquioxane nanocomposite
محورهای موضوعی : Journal of Nanoanalysis
Mansoureh Zarezadeh-Mehrizi
1
(Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran)
Majid Karimi
2
(Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran)
Zahra Kalantari khoramdareh
3
(Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran)
Mahnaz Qomi
4
(Department of medicinal chemistry, faculty of pharmaceutical chemistry, pharmaceutical sciences branch, Islamic Azad university, Tehran, Iran|Active pharmaceutical ingeredients research center (APIRC), pharmaceutical sciences branch, Islamic Azad university, Tehran, Iran)
کلید واژه: hydrogel, Organic/inorganic nanocomposite, Polyacrylic acid, Polyhedral oligomeric silsesquioxane (POSS),
چکیده مقاله :
Polyacrylic acid/ octavinyl polyhedral oligomeric silsesquioxane, nanocomposite hydrogel with 3-D network was synthesized via radical polymerization. Octavinyl polyhedral oligomeric silsesquioxane was used as crosslinker and nanofiller simultaneously in the preparation of the hydrogel. Hydrogel adsorption performance was determined by adsorption of methylene blue. The adsorption capacity was evaluated under the effects of dye concentration, adsorption contact time and medium pH. The experimental data fitted a pseudo-second-order model and isotherm indicated that the data were agreed with the Langmuir model. The high adsorption capacity (Qmax=1000 (mg/g)) shows the better efficiency of the adsorbent and indicates this hydrogel is a good candidate as the adsorbent of cationic dye and ions.
1. M. Rafatullah, O. Sulaiman, R. Hashim and A. Ahmad, Journal of Hazardous Materials, 177, 70 (2010).
2. R. Bhattacharyya and S.K. Ray, Chemical Engineering Journal, 260, 269 (2015).
3. C. Zhou, Q. Wu, T. Lei and I.I. Negulescu, Chemical Engineering Journal, 251, 17 (2014).
4. H. Mittal, A. Maity and S.S. Ray, Chemical Engineering Journal, 279, 166 (2015).
5. D. Chen, Z. Zeng, Y. Zeng, F. Zhang and M. Wang, Water Resources and Industry, 15, 1 (2016).
6. M.T. Yagub, T.K. Sen, S. Afroze and H.M. Ang, Advances in Colloid and Interface Science, 209, 172 (2014).
7. Q. Zhao and T. Cao, Industrial & Engineering Chemistry Research, 51, 4952 (2012).
8. E. Fois, G. Tabacchi, A. Devaux, P. Belser, D. Brühwiler and G. Calzaferri, Langmuir, 29, 9188 (2013).
9. V.O. Njoku, K.Y. Foo, M. Asif and B.H. Hameed, Chemical Engineering Journal, 250, 198 (2014).
10. H. Chaudhuri, S. Dash and A. Sarkar, Industrial & Engineering Chemistry Research, 55, 10084 (2016).
11. E. Haque, J.W. Jun and S.H. Jhung, Journal of Hazardous Materials, 185, 507 (2011).
12. D. Parasuraman and M.J. Serpe, ACS Applied Materials & Interfaces, 3, 4714 (2011).
13. R. Vodă, L. Lupa, A. Negrea, M. Ciopec, P. Negrea and C.M. Davidescu, Separation Science and Technology, 51, 2511 (2016).
14. A.U. Khan, Y. Wei, Z.U. Haq Khan, K. Tahir, A. Ahmad, S.U. Khan, F.U. Khan, Q.U. Khan and Q. Yuan, Separation Science and Technology, 51, 1070 (2016).
15. S. Thakur, S. Pandey and O.A. Arotiba, Carbohydrate Polymers, 153, 34 (2016).
16. M.A. Mekewi, T.M. Madkour, A.S. Darwish and Y.M. Hashish, Journal of Industrial and Engineering Chemistry, 30, 359 (2015).
17. H. Ge and J. Wang, Chemosphere, 169, 443 (2017).
18. L. Zhu, J. Guo, P. Liu and S. Zhao, Applied Clay Science, 121–122, 29 (2016).
19. X.-F. Sun, Q. Ye, Z. Jing and Y. Li, Polymer Composites, 35, 45 (2014).
20. C.-x. Yang, L. Lei, P.-x. Zhou, Z. Zhang and Z.-q. Lei, Journal of Colloid and Interface Science, 443, 97 (2015).
21. S.R. Shirsath, A.P. Patil, R. Patil, J.B. Naik, P.R. Gogate and S.H. Sonawane, Ultrasonics Sonochemistry, 20, 914 (2013).
22. D.B. Cordes, P.D. Lickiss and F. Rataboul, Chemical Reviews, 110, 2081 (2010).
23. E. Ayandele, B. Sarkar and P. Alexandridis, Nanomaterials, 2, 445 (2012).
24. D. Chen, S. Yi, W. Wu, Y. Zhong, J. Liao, C. Huang and W. Shi, Polymer, 51, 3867 (2010).
25. H. Xu, B. Yang, J. Wang, S. Guang and C. Li, Macromolecules, 38, 10455 (2005).
26. M.A. Moharram, S.M. Rabie and H.M. El-Gendy, Journal of Applied Polymer Science, 85, 1619 (2002).
27. T.A. Saleh, A.M. Muhammad, B. Tawabini and S.A. Ali, Journal of Chemical & Engineering Data, 61, 3377 (2016).
28. Y. Li, M. Wu, B. Wang, Y. Wu, M. Ma and X. Zhang, ACS Sustainable Chemistry & Engineering, 4, 5523 (2016).
29. A. Akbari and N. Arsalani, Polymer-Plastics Technology and Engineering, 55, 1586 (2016).
