Thermomechanical Comparison Between Bobbin and Conventional Friction Stir Welding of A356 Aluminum Alloy
محورهای موضوعی : Welding
1 - Assistant professor, Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran
کلید واژه: FSW, BTFSW, Force, Strain, Temperature,
چکیده مقاله :
Friction Stir Welding (FSW) is a welding technique that has brought significant advancements to the field of metal joining. An innovative variation of this technique is known as bobbin tool friction stir welding (BTFSW). This study aimed to compare various aspects, including force, temperature, and strain, between FSW and BTFSW. For this reason, the finite element method was employed, utilizing the Eulerian technique to model the welding process. The findings revealed that the presence of two shoulders in BTFSW enhances heat generation by increasing the contact area with the workpiece, resulting in improved frictional heat production. The advancing side of the BFSW sample exhibited the highest recorded peak temperature, reaching 532°C. On the other hand, the CFSW sample displayed a comparatively lower peak temperature of approximately 347°C. The elevated temperature in BTFSW enhances material flowability and plasticity, leading to reduced longitudinal forces compared to FSW. In CFSW, the longitudinal force varies between 3500 N and 2500 N, whereas in BTFSW, the longitudinal force is significantly lower, approximately 800 N. Furthermore, analysis of strain distribution demonstrated that BTFSW exhibits an hourglass-shaped strain pattern, indicating a larger area affected by strain when compared to FSW. These results highlight the benefits of BTFSW in terms of enhanced heat generation, reduced forces, and a larger strain-affected area, underscoring its potential as a superior welding technique.
Friction Stir Welding (FSW) is a welding technique that has brought significant advancements to the field of metal joining. An innovative variation of this technique is known as bobbin tool friction stir welding (BTFSW). This study aimed to compare various aspects, including force, temperature, and strain, between FSW and BTFSW. For this reason, the finite element method was employed, utilizing the Eulerian technique to model the welding process. The findings revealed that the presence of two shoulders in BTFSW enhances heat generation by increasing the contact area with the workpiece, resulting in improved frictional heat production. The advancing side of the BFSW sample exhibited the highest recorded peak temperature, reaching 532°C. On the other hand, the CFSW sample displayed a comparatively lower peak temperature of approximately 347°C. The elevated temperature in BTFSW enhances material flowability and plasticity, leading to reduced longitudinal forces compared to FSW. In CFSW, the longitudinal force varies between 3500 N and 2500 N, whereas in BTFSW, the longitudinal force is significantly lower, approximately 800 N. Furthermore, analysis of strain distribution demonstrated that BTFSW exhibits an hourglass-shaped strain pattern, indicating a larger area affected by strain when compared to FSW. These results highlight the benefits of BTFSW in terms of enhanced heat generation, reduced forces, and a larger strain-affected area, underscoring its potential as a superior welding technique.
[1] M. Akbari, P. Asadi, T. Sadowski, "A review on friction stir welding/processing: Numerical modeling", 2023.
[2] E.A.T. López, A.J. Ramirez, "Effect of process parameters in obtaining aluminium–steel joints and their microstructure by friction stir welding (fsw)", Welding International, Vol. 29, No. 9, 2015, pp. 689-697.
[3] M. Akbari, M. Aliha, F. Berto, "Investigating the role of different components of friction stir welding tools on the generated heat and strain", Forces in Mechanics, Vol. 10, No. 2023, pp. 100166.
[4] S. Singh, V.J. Badheka, V.S. Gadakh, "Assisted cooling approach for fsw of pure copper", Welding International, Vol. 36, No. 1, 2022, pp. 1-8.
[5] T. Ghidini, T. Vugrin, C. Dalle Donne, "Residual stresses, defects and non-destructive evaluation of fsw joints", Welding International, Vol. 19, No. 10, 2005, pp. 783-790.
[6] X. Lu, J. Qiao, J. Qian, S. Sun, S.Y. Liang, "Welding parameters optimization during plunging and dwelling phase of fsw 2219 aluminum alloy thick plate", The International Journal of Advanced Manufacturing Technology, Vol. 120, No. 9-10, 2022, pp. 6163-6173.
[7] X. Lu, B. Yang, Y. Zhou, S. Sun, S.Y. Liang, "Influence of process parameters on temperature field, microstructure, and mechanical properties of fsw thick aluminum alloy 2219", J. of Materi Eng and Perform, Vol. No. 2023, pp. 1-11.
[8] G. Ma, H. Gao, C. Sun, Y. Gu, J. Zhao, Z. Fang, "Probing the anti-corrosion behavior of x65 steel underwater fsw joint in simulated seawater", Frontiers in Materials, Vol. 8, No. 2022, pp. 723986.
[9] M. Khedr, A. Hamada, A. Järvenpää, S. Elkatatny, W. Abd-Elaziem, "Review on the solid-state welding of steels: Diffusion bonding and friction stir welding processes", Metals, Vol. 13, No. 1, 2022, pp. 54.
[10] M. Regev, B. Almoznino, S. Spigarelli, "A study of the metallurgical and mechanical properties of friction-stir-welded pure titanium", Metals, Vol. 13, No. 3, 2023, pp. 524.
[11] N. Raut, V. Yakkundi, V. Sunnapwar, T. Medhi, V.K.S. Jain, "A specific analytical study of friction stir welded ti-6al-4v grade 5 alloy: Stir zone microstructure and mechanical properties", Journal of Manufacturing Processes, Vol. 76, No. 2022, pp. 611-623.
[12] V. Lunetto, M. De Maddis, P. Russo Spena, "Similar and dissimilar lap friction stir welding of titanium alloys: On the elimination of the hook defect", The International Journal of Advanced Manufacturing Technology, Vol. 126, No. 7-8, 2023, pp. 3417-3435.
[13] M. Akbari, H. Rahimi Asiabaraki, "Modeling and optimization of tool parameters in friction stir lap joining of aluminum using rsm and nsga ii", Welding International, Vol. 37, No. 1, 2023, pp. 21-33.
[14] M. Akbari, H. Rahimi Asiabaraki, E. Hassanzadeh, M. Esfandiar, "Simulation of dissimilar friction stir welding of aa7075 and aa5083 aluminium alloys using coupled eulerian–lagrangian approach", Welding International, Vol. 37, No. 4, 2023, pp. 174-184.
[15] K. Fuse, V. Badheka, "Bobbin tool friction stir welding: A review", Science and Technology of Welding and Joining, Vol. 24, No. 4, 2019, pp. 277-304.
[16] M.M. Ahmed, K. Touileb, M.M. El-Sayed Seleman, I. Albaijan, M.I. Habba, "Bobbin tool friction stir welding of aluminum: Parameters optimization using taguchi experimental design", Materials, Vol. 15, No. 8, 2022, pp. 2771.
[17] M. Pecanac, D.L. Zlatanovic, N. Kulundzic, M. Dramicanin, Z. Lanc, M. Hadzistević, S. Radisic, S. Balos, "Influence of tool and welding parameters on the risk of wormhole defect in aluminum magnesium alloy welded by bobbin tool fsw", Metals, Vol. 12, No. 6, 2022, pp. 969.
[18] J. Feng, Y. Li, W. Gong, D. Sun, "The microstructures and mechanical properties of underwater bobbin tool friction stir–welded 6082-t6 aluminum alloy", The International Journal of Advanced Manufacturing Technology, Vol. 121, No. 1-2, 2022, pp. 1443-1453.
[19] P. Asadi, M. Mirzaei, M. Akbari, "Modeling of pin shape effects in bobbin tool fsw", International Journal of Lightweight Materials and Manufacture, Vol. 5, No. 2, 2022, pp. 162-177.
[20] Y. Sun, W. Liu, Y. Li, S. Sun, W. Gong, "Study on temperature field, microstructure, and properties of t2 pure copper by bobbin tool friction stir welding", The International Journal of Advanced Manufacturing Technology, Vol. 127, No. 3, 2023, pp. 1341-1353.
[21] G.-Q. Wang, Y.-H. Zhao, Y.-Y. Tang, "Research progress of bobbin tool friction stir welding of aluminum alloys: A review", Acta Metallurgica Sinica (English Letters), Vol. 33, No. 1, 2020, pp. 13-29.
[22] M. Esmaily, A. Mortazavi, W. Osikowicz, H. Hindsefelt, J.-E. Svensson, M. Halvarsson, J. Martin, L.-G. Johansson, "Bobbin and conventional friction stir welding of thick extruded aa6005-t6 profiles", Materials & Design, Vol. 108, No. 2016, pp.
[23] K. Fuse, V. Badheka, A.D. Oza, C. Prakash, D. Buddhi, S. Dixit, N.I. Vatin, "Microstructure and mechanical properties analysis of al/cu dissimilar alloys joining by using conventional and bobbin tool friction stir welding", 2022.
[24] D. Sejani, W. Li, V. Patel, "Stationary shoulder friction stir welding–low heat input joining technique: A review in comparison with conventional fsw and bobbin tool fsw", Critical Reviews in Solid State and Materials Sciences, Vol. 47, No. 6, 2022, pp. 865-914.
[25] K. Fuse, V. Badheka, A.D. Oza, C. Prakash, D. Buddhi, S. Dixit, N. Vatin, "Microstructure and mechanical properties analysis of al/cu dissimilar alloys joining by using conventional and bobbin tool friction stir welding", Materials, Vol. 15, No. 15, 2022, pp. 5159.
[26] P. Asadi, R.A. Mahdavinejad, S. Tutunchilar, "Simulation and experimental investigation of fsp of az91 magnesium alloy", Materials Science and Engineering: A, Vol. 528, No. 21, 2011, pp. 6469-6477.
[27] G. Buffa, A. Ducato, L. Fratini, "Fem based prediction of phase transformations during friction stir welding of ti6al4v titanium alloy", Materials Science and Engineering: A, Vol. 581, No. 0, 2013, pp. 56-65.
[28] B. Meyghani, M. Awang, "The influence of the tool tilt angle on the heat generation and the material behavior in friction stir welding (fsw)", Metals, Vol. 12, No. 11, 2022, pp. 1837.
[29] O.S. Salih, H. Ou, W. Sun, "Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy", International Journal of Mechanical Sciences, Vol. 238, No. 2023, pp. 107827.
[30] M. Esmaily, N. Mortazavi, W. Osikowicz, H. Hindsefelt, J.E. Svensson, M. Halvarsson, J. Martin, L.G. Johansson, "Bobbin and conventional friction stir welding of thick extruded aa6005-t6 profiles", Materials & Design, Vol. 108, No. 2016, pp. 114-125.
[31] M. Mirzaei, P. Asadi, A. Fazli, "Effect of tool pin profile on material flow in double shoulder friction stir welding of az91 magnesium alloy", International Journal of Mechanical Sciences, Vol. 183, No. 2020, pp. 105775.
[32] J.-y. LI, X.-p. ZHOU, C.-l. DONG, J.-h. DONG, "Temperature fields in 6082 aluminum alloy samples bobbin-tool friction stir welded", Journal of Aeronautical Materials, Vol. 33, No. 5, 2013, pp. 36-40.
[33] M. Akbari, M. Aliha, S. Keshavarz, A. Bonyadi, "Effect of tool parameters on mechanical properties, temperature, and force generation during fsw", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 233, No. 6, 2019, pp. 1033-1043.
[34] D. Hattingh, T. Van Niekerk, C. Blignault, G. Kruger, M. James, "Analysis of the fsw force footprint and its relationship with process parameters to optimise weld performance and tool design", Weld World, Vol. 48, No. 2004, pp. 50-58.
[35] C. Chen, R. Kovacevic, "Thermomechanical modelling and force analysis of friction stir welding by the finite element method", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 218, No. 5, 2004, pp. 509-519.
[36] M.S. Jaffarullah, C.Y. Low, M.S.B. Shaari, A. Jaffar, "A review of force control techniques in friction stir process", Procedia Computer Science, Vol. 76, No. 2015, pp. 528-533.
[37] M. Akbari, P. Asadi, T. Sadowski, "A review on friction stir welding/processing: Numerical modeling", Materials, Vol. 16, No. 17, 2023, pp. 5890.
[38] M. Akbari, M.R.M. Aliha, S.M.E. Keshavarz, A. Bonyadi, "Effect of tool parameters on mechanical properties, temperature, and force generation during fsw", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 233, No. 6, 2016, pp. 1033-1043.
[39] F.F. Wang, W.Y. Li, J. Shen, Q. Wen, J.F. dos Santos, "Improving weld formability by a novel dual-rotation bobbin tool friction stir welding", Journal of Materials Science & Technology, Vol. 34, No. 1, 2018, pp. 135-139.
[40] M. Akbari, P. Asadi, "Effects of different cooling conditions on friction stir processing of a356 alloy: Numerical modeling and experiment", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 8, 2021, pp. 4133-4146.
[41] D. Li, X. Yang, L. Cui, F. He, H. Shen, "Effect of welding parameters on microstructure and mechanical properties of aa6061-t6 butt welded joints by stationary shoulder friction stir welding", Materials & Design, Vol. 64, No. 2014, pp. 251-260.
[42] F. Wang, W. Li, J. Shen, Z. Zhang, J. Li, J. Dos Santos, "Global and local mechanical properties and microstructure of bobbin tool friction-stir-welded al–li alloy", Science and Technology of Welding and Joining, Vol. 21, No. 6, 2016, pp. 479-483.
