Safety Risk Assessment; Using Fuzzy Failure Mode and Effect Analysis and Fault Tree Analysis
محورهای موضوعی : Transactions on Fuzzy Sets and Systems
Mazdak Khodadadi-Karimvand
1
,
Sara Taherifar
2
1 - Department of Industrial Engineering, Najafabad Branch, Islamic Azad University, Iran & Department of Safety Engineering, Faculty of Engineering, University of Science and Culture, Tehran, Iran.
2 - Department of Safety Engineering, Faculty of Engineering, University of Science and Culture, Tehran, Iran.
کلید واژه: fuzzy number, Failure Mode and Effect Analysis (FMEA), Fault Tree Analysis (FTA), Qualitative Risk Assessment. Probabilistic Risk Assessment (PRA),
چکیده مقاله :
The failure mode and effects analysis (FMEA) is a qualitative, Inductive and effective method for detecting errors, faults, and failures in a system and fuzzy logic can improve that technique with more logical outputs. Moreover, the fault tree analysis (FTA) as a probabilistic risk assessment method is among the effective technique for calculating the probability of errors, faults, failures, reliability and safety integrity level (SIL) verification resulting in certain events at higher levels. The FTA also detects the main causes of events in complicated systems. Although this technique appears to be time-consuming in systems with many diverse components, it is considered a powerful tool. In this paper, the fuzzy FMEA analyzes the failure modes in a hypothetical system. After that, the process with the highest risk is selected as the input of an FTA. According to the qualitative and quantitative analysis of FTAs, a series of corrective actions will be proposed to reduce the failure probability.
The failure mode and effects analysis (FMEA) is a qualitative, Inductive and effective method for detecting errors, faults, and failures in a system and fuzzy logic can improve that technique with more logical outputs. Moreover, the fault tree analysis (FTA) as a probabilistic risk assessment method is among the effective technique for calculating the probability of errors, faults, failures, reliability and safety integrity level (SIL) verification resulting in certain events at higher levels. The FTA also detects the main causes of events in complicated systems. Although this technique appears to be time-consuming in systems with many diverse components, it is considered a powerful tool. In this paper, the fuzzy FMEA analyzes the failure modes in a hypothetical system. After that, the process with the highest risk is selected as the input of an FTA. According to the qualitative and quantitative analysis of FTAs, a series of corrective actions will be proposed to reduce the failure probability.
[1] H. Akyildiz and A. Mentes, An integrated risk assessment based on uncertainty analysis for cargo vessel safety, Safety Science, 92 (2017), 34-43.
[2] M. Barozzi, S. Contini, M. Raboni, V. Torretta, V. Casson Moreno and S. Copelli, Integration of Recursive Operability Analysis, FMECA and FTA for the Quantitative Risk Assessment in biogas plants: Role of procedural errors and components failures, Journal of Loss Prevention in the Process Industries, 71 (2021), 104468.
[3] D. H. Bester eld, Quality Control, 6th Edition, Prentice Hall, (2001).
[4] P. L. Clemens, Fault tree analysis, JE Jacobs Severdurup, 13 (2002).
[5] IEC 60812, 2018. https://webstore.iec.ch/publication/3571, Internatonal Electrotechncal Commsson.
[6] IEC 61025, 2006. https://webstore.iec.ch/publication/4311, Internatonal Electrotechncal Commsson.
[7] M. Khodadadi-Karimvand and H. Shirouyehzad, Well drilling fuzzy risk assessment using fuzzy FMEA and fuzzy TOPSIS, Journal of fuzzy extension and application, 2(2) (2021), 144-155.
[8] D. Kritzinger, Aircraft System Safety, Fault Tree Analysis, (2017), 59-99.
[9] D. Li and J. Gao, Study and application of reliability-centered maintenance considering radical maintenance, Journal of Loss Prevention in the Process Industries, 23(5) (2010), 622-629.
[10] M. K. Modarres and K. V. Mark, Reliability Engineering and Risk Analysis: a Practical Guide, 3rd Edition, Boca Raton, CRC Press, (2017).
[11] N. G. Mutlu and S. Altuntas, Risk analysis for occupational safety and health in the textile industry: Integration of FMEA, FTA, and BIFPET methods, International Journal of Industrial Ergonomics, 72 (2019), 222-240.
[12] N. R. Sankar and B. S. Prabhu, Modi ed Approach for Prioritization of Failure in a System Failure Mode and E ect Analysis, International Journal of Quality & Reliability Management, 18(3) (2001), 324-355.
[13] D. H. Stamatis, Failure Mode and E ect Analysis: FMEA from Theory to Execution, 2nd Edition, ASQC Press, New York, (2003).
[14] K. M. Tay and C. P. Lim, Fuzzy FMEA with a guided rules reduction system for prioritization of failures, International journal of quality & reliability management, 23(8) (2006), 1047-1066.
[15] H. J. Zimmermann, Fuzzy Set Theory and Its Applications, 4rd Edition, Boston: Kluwer Acadamic Publishers, (2001).
