The optimum configuration of FRP laminates of coupling shear wall concerning the load capacity
محورهای موضوعی : Structural Engineering
Hamoon Abroon Shahrbijary
1
(aDepartment of Civil Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran)
Ali Delnavaz
2
(Department of civil and surveying engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran)
کلید واژه: Nonlinear, Lateral loading, CFRP, Carbon fiber, Coupling shear wall,
چکیده مقاله :
Using of CFRP carbon sheets because of their high strength, lightness and ease of use have been very expanded in retrofitting concrete members. Including shear walls systems FRP can be used in order to rebuild or maintain the strength of an aged structural member. Repairing, or retrofitting of the intact structural member is conducted to enhance the structural resistance that was deteriorated due to the overloading, construction ignorance and so on. In this study, a model of coupled reinforced shear walls with changing the shape of CFRP fibers arrangement under lateral loading is considered. Then, the effect of coupled concrete compression shear wall resistance vary is investigated on the retrofitting. In all stages, the comparison among the proposed arrangement shape of CFRP fibers are accomplished in terms of lateral load carrying capacity of the specimens. Accordingly, the best form of fiber formation is recommended. Finally, it was concluded that the most optimistic fiber arrangement is fully covered and the next choice is vertically covered FRP arraignment.
[1] ACI 440R-96. State-of-the-Art Report on Fiber Reinforced Plastic (FRP) Reinforcement for Concrete Structures. American Concrete Institute 2002; 39.
[2] Meftah, S. A, Tounsi, A, Megueni A, Adda Bedia, E. A. Lateral Stiffness and Vibration Characteristics of RC Shear walls Bonded with Thin Composite Plates. Elsevier, J Compo structures 2006; 73(1):110-119.
[3] Meftah, S. A, Yeghnem. R, Tounsi A, Adda Bedia E. A. Seismic Behavior of RC Coupled Shear walls Repaired with CFRP Laminates Having Variable Fibers Spacing. Elsevier, J Constr and Building Materials 2007; 21 (8): 1661-1671.
[4] Dan D. Experimental tests on seismically damaged composite steel concrete walls retrofitted with CFRP composites. Elsevier, J Eng Structures 2012; 45:338–348.
[5] ElGawady, M., Lestuzzi, P. and Badoux, M. “Static Cyclic Response of Masonry Walls Retrofitted with Fiber-Reinforced Polymers”. Journal of Composites for Construction, 11(1), 50-61, 2007.
[6] Hamed, E. and Rabinovitch, O. “Masonry walls strengthened with composite materials – dynamic outof- plane behavior”. European Journal of Mechanics - A/Solids, 2008; 27(6), 1037-1059.
[7] Capozucca, R. “Experimental analysis of historic masonry walls reinforced by CFRP under in-plane cyclic loading”. Composite Structures, 94(1), 277-289, 2011.
[8] Konthesingha, K. M. C., Masia, M. J., Petersen, R. B., Mojsilovic, N., Simundic, G. and Page, A. W. “Static cyclic in-plane shear response of damaged masonry walls retrofitted with NSM FRP strips – An experimental evaluation”. Engineering Structures, 50, 126-136, 2013.
[9] El- Sokkary, H. and Galal, K. “Seismic Behavior of RC Shear Walls Strengthened with Fiber- Reinforced Polymer”. Journal of Composites for Construction, 17(5), 603-613, 2013.
[10] Umair, S., Numada, M., Amin, M. and Meguro, K. “Fiber reinforced polymer and polypropylene composite retrofitting technique for masonry structures”. Polymers, 7(5), 963-984, 2015.
[11] Bui, T.L., Si Larbi, A., Reboul, N. and Ferrier, E. "Shear behaviour of masonry walls strengthened by external bonded FRP and TRC”. Composite Structures, 132, 923-932, 2015.
[12] Cruz-Noguez, C., Lau, D., Sherwood, E., Hiotakis, S., Lombard, J., Foo, S. and Cheung, M. “Seismic behavior of RC shear walls strengthened for in-plane bending using externally bonded FRP sheets”. Journal of Composites for Construction, 19(1), 04014023, 2015.
[13] Mosallam A, Banerjee S. Enhancement in in-plane shear capacity of unreinforced masonry (URM) walls strengthened with fiber reinforced polymer composites. Elsevier, J Compo B Eng 2011; 42(6): 1657–1670.
[14] Marcari G, Oliveira DV, Fabbrocino G, Lourenco PB. Shear capacity assessment of tuff panels strengthened with FRP diagonal layout. Elsevier, J Compo B Eng 2011; 42(7): 1956–1965.
[15] ElGawady MA, Lestuzzi P, Badoux M. Aseismic retrofitting of unreinforced masonry walls using FRP. Elsevier, J Compo B Eng 2006; 37(2-3): 148–162.
[16] Altin S, Anil Ö, Kara ME, Kaya M. An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips. Elsevier, J Compo B Eng 2008; 39(4): 680–693.
[17] Ozkaynak H, Yuksel E, Buyukozturk O, Yalcin C, Dindar AA. Quasi-static and pseudo- dynamic testing of infilled RC frames retrofitted with CFRP material. Elsevier, J Compo B Eng 2011; 42(2): 238–263.
[20] Ghasemi, S. H., "Target reliability analysis for structures", Ph.D. thesis, Auburn University, USA ,2014.
[22] Yanaka, M., Ghasemi, S. H. and Nowak, A. S. “Reliability-Based and Life-Cycle-Cost Oriented Design Recommendations for Prestressed Concrete Bridge Girders” Structural Concrete, Vol. 18, Issue 1, pp. 836-847, 2016. ABAQUS theory manual and users manual,version 6.14,3
[23] Eurocode 2: Design of concrete structures,” general rules and rules for buildings”, Brussels, part 1-1, 2004.
[24] Wang T., Hsu T.T.C. Nonlinear finite element analysis of concrete structures using new constitutive models. Computers and Structures 2001, 79(32): 2781–2791.
[25] Kmiecik P, Kaminski M. Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration. Archives of civil and mechanical Eng 2011, Vol. XI, No. 3.
[26] Altin,S., Ozgur, A., Yang Mur, K., Emin, K., ”Hysteretic behavior od RC shear walls strengthened with CFRP strips”, Elsevier, Composites: part B,44 2013 ,pp.321-329,2012.
[27] Ali Delnavaz, Mohammad Hamidnia “Analytical investigation on shape configuration of CFRP strips on lateral loading capacity of strengthened RC shear wall” Structural Concrete 17 2016, No.6 , pp 1059-1070.
