Design Approach of Bolts and Sandwiching Steel Plates in Hybrid-Sandwiching Systems Based on FEM
محورهای موضوعی :
Alireza Zaferani
1
(Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.)
Pasha Javadi
2
(Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran)
Parham Memarzadeh
3
(Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran.)
کلید واژه: Hybrid-Sandwiching, RBS, Plastic Hinge, Ductility, Steel Frame,
چکیده مقاله :
Conventional reduced beam sections (RBS) maintain their capacity with up to 4% drift angle, after which local buckling at the reduced section significantly reduces their resistance. The use of hybrid-sandwiched reduced beam sections (HS-RBS) in the reduced section of conventional RBS beams previously proposed by the authors can increase the energy absorption capacity, allowing the beam to reach 7% drift without losing capacity. The experimental results indicate that placing the HS-RBS in the reduced section of the RBS beam does not disrupt its main role in forming a plastic joint in the reduced section. HS-RBS is comprised of grout, nuts and bolts, and the sandwiching plates. In this system, the bolts and the sandwiching plate enclose the grout and the bolts are placed in the grout on two sides of the beam web in the reduced section to increase the grout's capacity to resist the tensile stresses arising from the web buckling. The sandwiching plate is located in the reduced section on two sides of the flange to enclose the grout and increase the buckling resistance of the flange. This study employed finite element modeling (FEM) to analyse beam bolts with different diameters for different sections of the HS-RBS to obtain the best diameter for each bolt. Moreover, sandwiching plates with different thicknesses were examined to find the best thickness.
Conventional reduced beam sections (RBS) maintain their capacity with up to 4% drift angle, after which local buckling at the reduced section significantly reduces their resistance. The use of hybrid-sandwiched reduced beam sections (HS-RBS) in the reduced section of conventional RBS beams previously proposed by the authors can increase the energy absorption capacity, allowing the beam to reach 7% drift without losing capacity. The experimental results indicate that placing the HS-RBS in the reduced section of the RBS beam does not disrupt its main role in forming a plastic joint in the reduced section. HS-RBS is comprised of grout, nuts and bolts, and the sandwiching plates. In this system, the bolts and the sandwiching plate enclose the grout and the bolts are placed in the grout on two sides of the beam web in the reduced section to increase the grout's capacity to resist the tensile stresses arising from the web buckling. The sandwiching plate is located in the reduced section on two sides of the flange to enclose the grout and increase the buckling resistance of the flange. This study employed finite element modeling (FEM) to analyse beam bolts with different diameters for different sections of the HS-RBS to obtain the best diameter for each bolt. Moreover, sandwiching plates with different thicknesses were examined to find the best thickness.
