Productivity Improvement of BOB T-shirt through Line Balancing Using Control Limit analysis and discrete event simulation (Case study: - MAA Garment and Textile Factory)
محورهای موضوعی : Strategy
1 - industrial engineering, school of mechanical and industrial engineering , Ethiopian institute of technology-Mekelle, Mekelle University ,Mekelle , Ethiopia
کلید واژه: Productivity, simulation modeling, Bottleneck, Line Balancing, control limit, SMV,
چکیده مقاله :
This study deals with line balancing of BOB T-shirt model with the help of control limit analysis and discrete event simulation of the assembly lines. In this study control limit analysis is used to measure the performance of the assembly line and used to show the bottleneck operations of the assembly line and line balancing technique improves the productivity of the sewing line of the model. BOB T-shirt model has 16 main operations and each operation’s time is analyzed as standard minute value (SMV). The main bottleneck operations are analyzed using the control limit analysis and simulation modeling. Based on the SMV of each operation, those operations which are out of lower control limit and upper control limit is called us bottlenecks of the sewing lines of the garment section and the 1st bottleneck operation is tread trimming operation. When we apply control limit analysis and discrete event simulation technique for the line balancing; the daily output has been increased from 1032 pieces to 1289 pieces. And labor productivity and machine productivity are increased from 46.9 and 54.32 to 58.59 and 71.61 respectively. And then finally, the profit that the line generated also increased from 22704 to 28358birr.
aregawi, y., misgina, teklewold, & gebremedhin. (2020). Productivity Improvement through Line Balancing by Using Simulation modeling(case study Almeda Textile and Garment factory). Journal of Optimization in Industrial Engineering, 13(1), 153-165.
aregawi, y., serajul, h., & ivan. (2017). Bottleneck Identification Using Time Study and Simulation Modeling of Apparel Industries. industrial engineering and operation management. Bogota.
ashkan, h., hamid, k., & hesam, r. (2014). line balancing the production line by the simulation and statistics techniques.
asmelash, m. (2008). modeling and simulation analysis of manufacturing systems using arena simulation software.
azizul, m. a. (2007). line balancing and optimization for single model assembly line at a small medium industry.
Babu. (2011). industrial engineering in apparel production. international journal of science, technology and society.
Bryton. (1954). Balancing of a continues production line M.S Thesis. evanson: northwestern university.
gorema , t., & mulugeta, n. (2014). Modeling and performance analysis of manufacturing sysystems in footwear industry.
Hailemariam, d. (2009). mixed model assembly line balancing using simulation techniques.
hapaz, & hazmil, b. (2008). productivity improvement through line balancing.
hapazl, H. b. (2008). productivity improvement through line balancing.
hasanshumon, M., zaman, k. u., & azizur, r. (2010). productivity improvement through line balancing apparel industries. Khulna university of engineering and technology Khulna.
Islam, M. .., md.tanjimhossain, jalil, M. A., & Khalil, E. (2015). Line balancing for improving apparel production by operator’s skill matrix. International journals of science, technology and society, 101-106.
lamming, Steve, b., & Richard. (2014). manual for improving productivity in garment production.
Matebu, a. (2006). Model development of quality management system for Ethiopian textile industries.
Mominul, i., mehidi, h. s., & h.m, m. (2014). an optimal layout design in an apparel industry by appropriate line balancing:.
Roy, R. (2005). Modern approach to operations management,5th edition. new delhi: new age international (p) limited publishers.
Suresh, S. K. (2008). production and operation management 2nd edition. Bangalore: new age international (p) limited publisher.
yemane, A., serajul, h., & ivan, s. (2017). Optimal Layout Design by Line Balancing Using Simulation Modeling (Case Study MAA garment textile factory). IEOM.
Zandin, K. (2001). Maynard’s Industrial Engineering Handbook (5th Edition). McGraw-Hill.
