Continuous improvement strategy in traditional shipyard industry: a holistic approach towards sustainability

محورهای موضوعی :

Fitriadi Fitriadi ¹ , Ahmad Faisal Mohamad Ayob ²

1 - Department of Industrial Engineering, Faculty of Engineering, Universitas Teuku Umar, 23681, Aceh Barat, Indonesia
2 - Program of Naval Architecture & Maritime Technology, Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

تاریخ دریافت : 1401/12/24 تاریخ پذیرش : 1402/02/19 تاریخ انتشار : 1402/03/11

کلید واژه: Value Stream Mapping, Continuous Improvement, Sustainability Indicators, Traditional Shipyard,

چکیده مقاله :

The sustainability of the Traditional Shipyard Industry relies heavily on continuous improvement is to the production process, with the aim of optimizing it by reducing waste. To address this need, this study proposes the use of a Value Stream Mapping tool integrated with Sustainability Indicators to suggest ideas for continuous improvement in the Traditional Shipyard Industry. The main contribution of this research is the development of a concept that enables the assessment of measurable environmental, economic, and social systems in the shipbuilding process in traditional shipyards, allowing for continuous monitoring of changes in the shipbuilding system. The research method included a literature review, direct observation through fieldwork, and discussions with owners, management, employees, and operators on ship production in several Traditional Shipyards in Aceh. The findings suggest that the proposed concept can provide direction for improvement, leading to continuous enhancement in ship production in Traditional Shipyards. This research provides valuable insights for industry practitioners and policymakers on how to achieve sustainability through continuous improvement in traditional shipbuilding.

چکیده انگلیسی:

The sustainability of the Traditional Shipyard Industry relies heavily on continuous improvement is to the production process, with the aim of optimizing it by reducing waste. To address this need, this study proposes the use of a Value Stream Mapping tool integrated with Sustainability Indicators to suggest ideas for continuous improvement in the Traditional Shipyard Industry. The main contribution of this research is the development of a concept that enables the assessment of measurable environmental, economic, and social systems in the shipbuilding process in traditional shipyards, allowing for continuous monitoring of changes in the shipbuilding system. The research method included a literature review, direct observation through fieldwork, and discussions with owners, management, employees, and operators on ship production in several Traditional Shipyards in Aceh. The findings suggest that the proposed concept can provide direction for improvement, leading to continuous enhancement in ship production in Traditional Shipyards. This research provides valuable insights for industry practitioners and policymakers on how to achieve sustainability through continuous improvement in traditional shipbuilding.

منابع و مأخذ:

Abu, M., & Mia, S. (2017). Court Shoe Production Line: Improvement Of Process Cycle Efficiency By Using Lean Tools Development of Shoe last with convex shape for placing Orthotics in Footwear View project Eco-friendly leather dyeing using ultrasound technique View project. Article in Leather and Footwear Journal. https://doi.org/10.24264/lfj.17.3.3
Amran, M. E., Muhtazaruddin, M. N., & Haron, H. (2019). Renewable Energy Optimization Review: Variables towards Competitive Advantage in Green Building Development. Progress in Energy and Environment, 8, 1–15. https://www.akademiabaru.com/submit/index.php/progee/article/view/1051
Azadnia, A. H., & Ghadimi, P. (2018). An Integrated Approach of Fuzzy Quality Function Deployment and Fuzzy Multi-Objective Programming Tosustainable Supplier Selection and Order Allocation. Journal of Optimization in Industrial Engineering, 11(1), 1–22. https://doi.org/10.22094/JOIE.2017.629.1405
Baird, K., Tung, A., & Moses, A. (2023). The Corporate Social Responsibility Disclosure-Action Portrayal Gap: The Influence Of Management Control Systems And The Association With Organisational Performance. In Advances in Management Accounting (Vol. 34). https://doi.org/10.1108/S1474-787120220000034004
Baso, S., Musrina, M., & Anggriani, A. D. E. (2020). Strategy for Improving the Competitiveness of Shipyards in the Eastern Part of Indonesia. Kapal: Jurnal Ilmu Pengetahuan Dan Teknologi Kelautan, 17(2), 74–85. https://doi.org/10.14710/KAPAL.V17I2.29448
Breliastiti, R. (2016). Penerapan Standar Gri Sebagai Panduan Penyusunan Laporan Keberlanjutan Tahun 2020 Perusahaan Sektor Barang Konsumen Primer Dan Non-Primer Di Bursa Efek Indonesia. Jurnal Ekobisman, 6(1).
Calzavara, M., Persona, A., Sgarbossa, F., & Visentin, V. (2019). A model for rest allowance estimation to improve tasks assignment to operators. International Journal of Production Research, 57(3), 948–962. https://doi.org/10.1080/00207543.2018.1497816
Cil, I., Arisoy, F., Kilinc, H., Ozgurbuz, E., Cil, A. Y., & Uysal, E. (2021). Challenges and Trends in Shipbuilding Industry: Digitization of SEDEF Shipyard in Turkey. ISMSIT 2021 - 5th International Symposium on Multidisciplinary Studies and Innovative Technologies, Proceedings, 799–804. https://doi.org/10.1109/ISMSIT52890.2021.9604757
Cole, R. E. (2018). From CI to Continuous Innovation. Https://Doi.Org/10.1080/10686967.2001.11918977, 8(4), 7–21. https://doi.org/10.1080/10686967.2001.11918977
de Villiers, C., Rouse, P., & Kerr, J. (2016). A new conceptual model of influences driving sustainability based on case evidence of the integration of corporate sustainability management control and reporting. Journal of Cleaner Production, 136. https://doi.org/10.1016/j.jclepro.2016.01.107
Dev, A. K., & Fung, Z. K. (2019). Simulation of hull panel logistics improvement in a shipyard. RINA, Royal Institution of Naval Architects - 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019, 1. https://doi.org/10.3940/RINA.ICCAS.2019.1.8
DiBarra, C. (2002). 5S - A tool for culture change in shipyards. Journal of Ship Production, 18(3). https://doi.org/10.5957/jsp.2002.18.3.143
Engert, S., Rauter, R., & Baumgartner, R. J. (2016). Exploring the integration of corporate sustainability into strategic management: A literature review. Journal of Cleaner Production, 112. https://doi.org/10.1016/j.jclepro.2015.08.031
Estiasih, S. P., Sutejo, B., & Putra, W. H. A. (2017). Lean and Green Manufacturing Design At SMEs’s Madura Shipyard With Value Stream Mapping Tool and Simulation Model. Academic Research International, 8(4). www.savap.org.pk194www.journals.savap.org.pk
Fatouh, T., Elbelehy, C., Abdelsalam, A., Elakkad, E., & Abdelshafie, A. (2020). Time Compression in Engineer-to-Order Industry: A Case Study of a Norwegian Shipbuilding Industry. International Journal of Industrial and Manufacturing Engineering, 14(12), 624–629.
Faulkner, W., & Badurdeen, F. (2014). Sustainable Value Stream Mapping (Sus-VSM): methodology to visualize and assess manufacturing sustainability performance. Journal of Cleaner Production, 85, 8–18. https://doi.org/10.1016/J.JCLEPRO.2014.05.042
Firmansyah, M. R., & Djafar, W. (2017). Conceptual Model for Transfer of Technology in a Shipyard. International Journal of Engineering and Science Applications, 4(1), 43–50. http://pasca.unhas.ac.id/ojs/index.php/ijesca/article/view/1272
Fitriadi, F., & Ayob, A. F. M. (2022). Identifying the Shipyard Waste: An Application of the Lean Manufacturing Approach. International Journal of Global Optimization and Its Application, 1(2), 100–110. https://doi.org/10.56225/IJGOIA.V1I2.19
Fitriadi, Sofiyanurriyanti, Lubis, D. A., Pamungkas, I., & Irawan, H. T. (2020a). Lean Manufacturing Approach to Minimize Waste in the Process of Sorting Palm Oil Using the Value Stream Mapping Method. IOP Conference Series: Materials Science and Engineering, 1003(1). https://doi.org/10.1088/1757-899X/1003/1/012028
Fitriadi, Sofiyanurriyanti, Lubis, D. A., Pamungkas, I., & Irawan, H. T. (2020b). Lean Manufacturing Approach to Minimize Waste in the Process of Sorting Palm Oil Using the Value Stream Mapping Method. IOP Conference Series: Materials Science and Engineering, 1003(1). https://doi.org/10.1088/1757-899X/1003/1/012028
Gaus, N. (2017). Selecting research approaches and research designs: a reflective essay. Qualitative Research Journal, 17(2), 99–112. https://doi.org/10.1108/QRJ-07-2016-0041/FULL/XML
Hristov, I., Chirico, A., & Appolloni, A. (2019). Sustainability Value Creation, Survival, and Growth of the Company: A Critical Perspective in the Sustainability Balanced Scorecard (SBSC). Sustainability, 11(7). https://doi.org/10.3390/su11072119
ILO. (2014). Safety and Health at Work: A Vision for Sustainable Prevention. In World Congress on Safety and Health at Work: Vol. XX. http://www.ilo.org/publns
Irawan, A., & Leksono, E. B. (2021). Analisis Beban Kerja pada Departemen Quality Control. Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 1–6. https://doi.org/10.30656/INTECH.V7I1.2537
Jollands, S., Akroyd, C., & Sawabe, N. (2018). Management controls and pressure groups: the mediation of overflows. Accounting, Auditing and Accountability Journal, 31(6). https://doi.org/10.1108/AAAJ-10-2016-2747
Jumlah Industri Jasa Menurut Jenis Industri di Kabupaten Aceh Barat - Tahun 2020 - Open Data Aceh Barat. (n.d.). Retrieved December 21, 2022, from https://data.acehbaratkab.go.id/dataset/jumlah-industri-jasa-menurut-jenis-industri-di-kabupaten-aceh-barat/resource/88932603-a24a-4825-9fe6-f3b47ba6b3bd?view_id=a8353486-8438-4741-bea7-a5b850c6aa85
Kansul, D. S., & Karabay, G. (2019). INCREASING THE PROCESS CYCLE EFFICIENCY OF A MEN TROUSERS ASSEMBLY LINE. Tekstil ve Konfeksiyon, 29(3), 253–261. https://doi.org/10.32710/TEKSTILVEKONFEKSIYON.498921
Kerr, J., Rouse, P., & de Villiers, C. (2015). Sustainability reporting integrated into management control systems. Pacific Accounting Review, 27(2). https://doi.org/10.1108/PAR-08-2012-0034
Kolich, D., Yao, Y. L., Fafandjel, N., & Hadjina, M. (2014). Value Stream Mapping Micropanel Assembly with Clustering to improve Flow in a Shipyard. International Conference on Innovative Technologies.
Kunkera, Z., Tošanović, N., & Štefanić, N. (2022). Improving the Shipbuilding Sales Process by Selected Lean Management Tool. Machines, 10(9). https://doi.org/10.3390/machines10090766
Madrohim, & Prakoso, L. Y. (2021). The Total War Strategy Through the Improvement of the Role of National Shipyard in Supporting Main Weapon System of Indonesian Navy. The Influence of Sea Power upon History, 1660–1783. https://doi.org/10.1017/CBO9780511783289
Manea, E., & Manea, M. G. (2019). The Risk Concept and the Impact on the Organizational Performance of Maritime Shiprepairs Shipyards. Advanced Engineering Forum, 34, 300–308. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AEF.34.300
McLean, R. S., Antony, J., & Dahlgaard, J. J. (2015). Failure of CI initiatives in manufacturing environments: a systematic review of the evidence. Http://Dx.Doi.Org/10.1080/14783363.2015.1063414, 28(3–4), 219–237. https://doi.org/10.1080/14783363.2015.1063414
Morioka, S. N., & Carvalho, M. M. (2016). Measuring sustainability in practice: exploring the inclusion of sustainability into corporate performance systems in Brazilian case studies. Journal of Cleaner Production, 136, 123–133. https://doi.org/10.1016/J.JCLEPRO.2016.01.103
Mrugalska, B., & Wyrwicka, M. K. (2017). Towards Lean Production in Industry 4.0. Procedia Engineering, 182, 466–473. https://doi.org/10.1016/J.PROENG.2017.03.135
Nascimento, D. L. de M., Goncalvez Quelhas, O. L., Gusmão Caiado, R. G., Tortorella, G. L., Garza-Reyes, J. A., & Rocha-Lona, L. (2020). A lean six sigma framework for continuous and incremental improvement in the oil and gas sector. International Journal of Lean Six Sigma, 11(3). https://doi.org/10.1108/IJLSS-02-2019-0011
Pambreni, Y., Khatibi, A., Ferdous Azam, S. M., & Tham, J. (2019). The influence of total quality management toward organization performance. Management Science Letters, 9(9), 1397–1406. https://doi.org/10.5267/J.MSL.2019.5.011
Pittenger, D. M. (2011). Evaluating Sustainability of Selected Airport Pavement Treatments with Life-Cycle Cost, Raw Material Consumption, and Greenroads Standards. Https://Doi.Org/10.3141/2206-08, 2206, 61–68. https://doi.org/10.3141/2206-08
Praharsi, Y., Abu Jami’in, M., Shipbuilding, G. S., & Wee, H. M. (2020). Barriers and enablers for developing sustainable supply chain at traditional Shipyards in East Java, Indonesia. Proceedings of the International Conference on Industrial Engineering and Operations Management, 0(March).
Praharsi, Y., Jami’in, M. A., Suhardjito, G., & Wee, H. M. (2019). Lean management and analysis-An empirical study of a traditional shipbuilding industry in Indonesia. Proceedings of the International Conference on Industrial Engineering and Operations Management.
Randhawa, J. S., & Ahuja, I. S. (2017). 5S – a quality improvement tool for sustainable performance: literature review and directions. International Journal of Quality and Reliability Management, 34(3), 334–361. https://doi.org/10.1108/IJQRM-03-2015-0045/FULL/PDF
Reda, H., & Dvivedi, A. (2022). Application of value stream mapping (VSM) in low-level technology organizations: a case study. International Journal of Productivity and Performance Management, 71(6), 2393–2409. https://doi.org/10.1108/IJPPM-03-2021-0118
Rizwan, T., Rizki, A., Salsabila, U., Muhammad, M., Maulana, R., Chaliluddin, M. A., Affan, J. M., Thaib, R., Suhendrianto, S., & Muchlis, Y. (2021). Literature review on shipyard productivity in Indonesia. Depik, 10(1), 1–10. https://doi.org/10.13170/depik.10.1.18712
Schoer, K., Weinzettel, J., Kovanda, J., Giegrich, J., & Lauwigi, C. (2012). Raw material consumption of the European Union - Concept, calculation method, and results. Environmental Science and Technology, 46(16), 8903–8909. https://doi.org/10.1021/ES300434C/SUPPL_FILE/ES300434C_SI_002.ZIP
Sharma, S., & Gandhi, P. J. (2017). Scope and impact of implementing lean principles & practices in shipbuilding. Procedia Engineering, 194. https://doi.org/10.1016/j.proeng.2017.08.140
Souza, J. P. E., & Alves, J. M. (2018). Lean-integrated management system: A model for sustainability improvement. Journal of Cleaner Production, 172, 2667–2682. https://doi.org/10.1016/J.JCLEPRO.2017.11.144
Storch, R. L., & Williamson, M. (2003). Technology value analysis of the ship contract design value stream. IFIP Advances in Information and Communication Technology, 129. https://doi.org/10.1007/978-0-387-35698-3
Sulaiman, J., Sasono, S., & Susilo, S. (2017). Sulistiyono Susilo, Suharto, Factors Affecting Shipbuilding Productivity. International Journal of Civil Engineering and Technology, 8(7), 961–975. http://iaeme.com/Home/journal/[e-mail]://http://iaeme.com/Home/issue/IJCIET?Volume=8&Issue=7http://iaeme.com
Supriyadi, S., Siregar, H., Sucipto, E. H., Tinggi, S., & Muhammadiyah, T. M. (2019). Analysis of Work Load and Total Operator Needs on Final Inspection of Work Station. 297–301. https://doi.org/10.2991/ICLICK-18.2019.61
Tan, E., Lai, H., Ng, F., Yun, J., Arokiam, I. C., Heng, J., & Joo, A. (2020). Barriers Affecting Successful Lean Implementation in Singapore’s Shipbuilding Industry: A Case Study. OPERATIONS AND SUPPLY CHAIN MANAGEMENT, 13(2), 166–175.
Tebiary, A. A., Suastika, K. I., & Ma’ruf, B. (2017). Analysis Of Non Value Added Activity On Ship Production Process Approach Concept Of Value Stream Mapping Case Study At PT. Dumas Tanjung Perak Shipyard Surabaya. Wave: Jurnal Ilmiah Teknologi Maritim, 11(1), 23–30. https://doi.org/10.29122/JURNALWAVE.V11I1.2056
Trisusanto, D., Bariyah, C., & Kristanto, A. (2020). Design of ergonomic work facilities on assembly station of mozaic stone for increasing work productivity. Asia-Pacific Journal of Science and Technology, 25(01). https://so01.tci-thaijo.org/index.php/APST/article/view/97662
Vaezi, E. (2021). Measuring the performances of Medical Diagnostic Laboratories based on interval efficiencies. Journal of Optimization in Industrial Engineering, 14(2), 137–154. https://doi.org/10.22094/JOIE.2019.1864217.1635
Wang, D., Khoo, T. J., & Kan, Z. (2020). Exploring the Application of Digital Data Management Approach for Facility Management in Shanghai’s High-rise Buildings. Progress in Energy and Environment, 13, 1–15. https://www.akademiabaru.com/submit/index.php/progee/article/view/1063
Wijethilake, C., & Ekanayake, A. (2018). Proactive strategic responses to corporate sustainability pressures: A sustainability control system framework. In Advances in Management Accounting (Vol. 30). https://doi.org/10.1108/S1474-787120180000030006
Xue, L., Shi, G., Dai, D., & Xu, Y. (2020). Two-Stage Efficiency Structure Analysis Model of Shipbuilding Based on Driving Factors: The Case of Chinese Shipyard. Open Journal of Social Sciences, 08(02), 182–200. https://doi.org/10.4236/jss.2020.82015
Zharfpeykan, R. (2021). Representative account or greenwashing? Voluntary sustainability reports in Australia’s mining/metals and financial services industries. Business Strategy and the Environment, 30(4). https://doi.org/10.1002/bse.2744
Zhou, J., Li, P., Zhou, Y., Wang, B., Zang, J., & Meng, L. (2018). Toward New-Generation Intelligent Manufacturing. Engineering, 4(1), 11–20. https://doi.org/10.1016/J.ENG.2018.01.002