Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout
محورهای موضوعی : EngineeringM Shariati 1 , Y Faradjian 2 , H Mehrabi 3
1 - Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
2 - Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran
3 - Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran
کلید واژه: FEM, Buckling, Cutout, Experimental analysis, Steel plates,
چکیده مقاله :
Steel plates are used in various structures, such as the structures of the deck and body of ships, bridges, and aerospace industry. In this study, we investigate the buckling and post-buckling behavior of rectangular steel plates having circular cutouts with two boundary conditions: first, clamped supports at upper and lower ends and free supports at other edges; second, clamped supports at upper and lower ends and simply supports at other edges, using finite element method (by ABAQUS software) and experimental tests(by an INSTRON servo hydraulic machine). In this research, in addition to the aspect ratio, the effect of changing the location of the cutout on the buckling analysis is investigated. The results of both numerical and experimental analyses are compared and showing a very good agreement between them.
[1] Timoshenko S.P., Gere J.M., 1961, Theory of Elastic Stability, McGraw-Hill Book Company, New York.
[2] El-Sawy Khaled M., Nazmy Aly S., 2001, Effect of aspect ratio on the elastic buckling of uniaxially loaded plates with eccentric holes , Thin-Walled Structures 39: 983-998.
[3] El-Sawy Khaled M., Nazmy Aly S., Ikbal Martini M., 2004, Elasto-plastic buckling of perforated plates under uniaxial compression , Thin-Walled Structures 42: 1083-1101.
[4] Narayanan R., Chow F.Y., 1984, Ultimate capacity of uniaxially compressed perforated plates, Thin-Walled Structures 2: 241-264.
[5] Shanmugam N.E., Thevendran V., Tan Y.H., 1999, Design formula for axially compressed perforated plates, Thin-Walled Structures 34: 1-20.
[6] Roberts T.M., Azizian Z.G.,1984, Strength of perforated plates subjected to in-plane loading, Thin-Walled Structures 2: 153-164.
[7] Mignot F., Puel J-P., Suquet P-M., 1980, Homogenization and bifurcation of perforated plates, Engineering science 18: 409-414.
[8] Yetterman A.L., Brown C.J., 1985, The elastic stability of square perforated plates, Computer & Structures 21(6): 1267-1272.
[9] Maan F.S., Querin O.M., Barton D.C., 2007, Extension of the fixed grid finite element method to eigenvalue problems, Advances in Engineering Software 38(8-9): 607-617.
[10] Singh Anand V., Tanveer M., 2006, Eigenvalue analysis of doubly connected plates with different configurations, Journal of Sound and Vibration 295: 76-93.
[11] Aydin Komur M., Sonmez M., 2008, Elastic buckling of rectangular plates under linearly varying in-plane normal load with a circular cutout, Mechanics Research Communications 35(6): 361-371.
[12] Rahai A.R., Alinia M.M., Kazemi S., 2008, Buckling analysis of stepped plates using modified buckling mode shapes, Thin-Walled Structures 46: 484-493.
[13] Eccher G., Rasmussen K.J.R., Zandonini R., 2008, Elastic buckling analysis of perforated thin-walled structures by the isoparametric spline finite strip method, Thin-Walled Structures 46: 165-191.
[14] Maiorana E., Pellegrino C.. Modena C., 2009, Elastic stability of plates with circular and rectangular holes subjected to axial compression and bending moment, Thin Walled Structure 47(3): 241-255.
[15] Eccher G., Rasmussen K.J.R., Zandoninib R., 2009, Geometric nonlinear isoparametric spline finite strip analysis of perforated, Thin-walled structures 47(2): 219-232.
[16] Paik J.K., 2008, Ultimate strength of perforated steel plates under combined biaxial compression and edge shear loads, Thin-Walled Structures 46: 207-213.
