Post-buckling analysis of porous circular plate with small initial deflection using first-order shear deformation theory
محورهای موضوعی : Mechanics of SolidsM. M Mohieddin Ghomshei 1 , Mahdi Alimohammadi 2
1 - Department of Mechanical Engineering,Faculty of Mechatronics,Karaj Branch,Islamic Azad University,Karaj,Iran
2 - Department of Mechanical Engineering, Faculty of Artificial Intelligence, Islamic Azad University, Karaj Branch, Karaj, Iran
کلید واژه: Porous circular plate, Small initial deflection, Differential quadrature method (DQM), Buckling and post-buckling, First-order shear deformation theory,
چکیده مقاله :
In this study, buckling and post-buckling analysis of circular porous plate with small initial deflection is investigated using the first-order shear deformation theory. Porosity is assumed variable in the thickness of the plate, and assumed to be symmetric with respect to the plate mid-plane. The first-order shear deformation theory and nonlinear von-Karman strain field has been used to derive the equilibrium equations in term of displacement field. The governing differential equations together with the boundary conditions are discretized by implementing the differential quadrature method (DQM). The set of nonlinear algebraic equations are then solved for displacement field components using an iterative method. The convergence of the numerical model is surveyed. Then the comparative and parametric studies are carried out. The results show that the present DQM model has fast convergence, and accurate results. Parametric studies are carried out. The porosity factor and initial deflection have significant influence on the plate deformation.
In this study, buckling and post-buckling analysis of circular porous plate with small initial deflection is investigated using the first-order shear deformation theory. Porosity is assumed variable in the thickness of the plate, and assumed to be symmetric with respect to the plate mid-plane. The first-order shear deformation theory and nonlinear von-Karman strain field has been used to derive the equilibrium equations in term of displacement field. The governing differential equations together with the boundary conditions are discretized by implementing the differential quadrature method (DQM). The set of nonlinear algebraic equations are then solved for displacement field components using an iterative method. The convergence of the numerical model is surveyed. Then the comparative and parametric studies are carried out. The results show that the present DQM model has fast convergence, and accurate results. Parametric studies are carried out. The porosity factor and initial deflection have significant influence on the plate deformation.
[1] Liu, P.S., Chen, G.F., 2014, Porous materials processing and applications.
[2] Ma, L.S., Wang, T.J., 2003, Nonlinear bending and post-buckling of a functionally graded circular plate under mechanical and thermal loadings, International Journal of Solids and Structures, Vol. 40, pp. 3311-3330
[3] Magnucki, K., Stasiewicz, P., 2004, Elastic buckling of a porous beam, Journal of Theoretical and Applied Mechanics 42, Vol. 4, pp. 859-868
[4] Samsam Shariat, B.A. and Eslami, M.R., 2005, Effect of initial imperfections on thermal buckling of functionally graded plates, Journal of Thermal Stresses, Vol. 28, pp. 1183-1198
[5] Jalali, S.K., Naei, M.H., 2010, Elastic buckling of moderately thick homogeneous circular plates of variable thickness, Journal of Solid Mechanics, Vol. 2, pp. 19-27
[6] Alipour, M.M., Shariyat, M., 2010, Stress analysis of two-directional FGM moderately thick constrained circular plates with non-uniform load and substrate stiffness distributions, Journal of Solid Mechanics, Vol. 2, pp. 316-331
[7] Magnucki, K., et al., 2010, Bending and buckling of a rectangular porous plate, Steel and Composite Structures, Vol. 6, pp. 319-328
[8] Mojahedin, A., Jabbari, M., Khorshidvand, A.R. and Eslami, M.R., 2016, Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher shear deformation theory, Thin-Walled Structures, Vol. 99, pp. 83-90
[9] Kamranfard, M.R., Saeedi, A. and Naderi, A., 2018, Analytical solution of buckling of porous annular sector plates, Scientific-Research Quarterly of Aerospace Mechanics, Volume 15, Number 1, pp. 137-152 “(in Persian)”
[10] Tu, T.M., Hoa, L.K., Hung, D.X. and Hai, L.T., 2018, Nonlinear buckling and post-buckling analysis of imperfect porous plates under mechanical loads, Journal of Sandwich Structures and Materials, pp. 1-21
[11] Bagheri, H., Kiani, Y. and Eslami, M.R., 2018, Asymmetric thermal buckling of temperature dependent annular FGM plates on a partial elastic foundation, Computers and Mathematics with Applications, Vol. 75, pp. 1566- 1581
[12] Mojahedin, A., Jabbari, M. and Salavati, M., 2019, Axisymmetric buckling of saturated circular porous-cellular plate based on first-order shear deformation theory, Int. J. Hydromechatronics, Vol. 2, pp. 144-158
[13] Ghomshei, M.M., 2020, A numerical study on the thermal buckling of variable thickness Mindlin circular FGM plate in a two-parameter foundation, Mechanics Research Communications, Vol. 108
[14] Kolahi, M.R., Khorshidvand, A.R., 2021, Deflection of buckled annular porous plate, Journal of Mechanical Research and Application, Vol. 11, pp. 18-29
[15] Njim, E.K., Bakhy, S.H. and Al-Waily, M., 2021, Analytical and numerical investigation of buckling load of functionally graded materials with porous metal of sandwich plate, Materials Today: Proceedings, pp. 1-11
[16] Zenkour, A.M., Aljadani, M.H., 2022, Buckling response of functionally graded porous plates due to a Quasi-3D refined theory, Mathematics 2022, pp. 1-20
[17] Sheplak, M., Dugundji, J., To be appeared, Large deflections of clamped circular plates under initial tension and transitions to membrane behavior, Journal of Applied Mechanics
[18] Moore, D.R., Couzens, K.H. and Iremonger, M.J., 1974, The deformations behaviour of foamed thermoplastics, Journal of Cellular Plastics, pp. 135-139
[19] Jalali, S.K., Naei, M.H., 2010, Thermal stability analysis of circular functionally graded sandwich plates of variable thickness using pseudo-spectral method, Materials and Design, Vol. 31, pp. 4755-4763
[20] Saini, R., et al., 2019, Buckling and vibration of FGM circular plates in thermal environment, Proc. Struct. Integr. 14, pp. 362-374
[21] Reddy, N., 2003, Mechanics of laminated composite plates and shells theory and application 2nd edition CRC Press
[22] Ugural, A. C., 2018, Plates and shells theory and analysis fourth Edition
[23] Shu, C., Richards, B.E., 1992, Application of generalized differential quadrature to solve two-dimensional incompressible Navier-Stokes equations, International Journal for Numerical Methods in Fluids, Vol. 15, pp. 791-798.