Numerical and Experimental Analysis of Impact and Damage on Composite Sandwich Panels with Grid-Stiffened Core

محورهای موضوعی : Mechanics of Solids

J Faraji Shoaa ¹ , A Davar ² , J Eskandari Jam ³ , M Heydari Beni ⁴

1 - Department of Mechanical Engineering, Malek ashtar University of Technology, Tehran, Iran
2 - Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran
3 - Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran
4 - Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran

تاریخ دریافت : 1401/05/17 تاریخ پذیرش : 1401/07/18 تاریخ انتشار : 1401/09/10

کلید واژه: Numerical and experimental methods, Sandwich panel, Impact and damage analysis, Composite grid core,

چکیده مقاله :

A composite grid sandwich panel consists of a core with a composite grid structure and two faces on both sides of the core. This study investigated low-velocity impact in grid sandwich panels with grid cores experimentally and numerically by constructing and performing experimental tests using Abaqus finite element software. In the experimental part, three sandwich panels with grid cores were made for the low- velocity impact test. In the numerical part, three-dimensional elements were used, and damage was solved via programming in the Fortran language in Abaqus software. The results showed that the use of foam in the core of these structures reduced deflection due to impact despite a slight increase in the final weight of the structures.

منابع و مأخذ:

1. Diamanti K., Soutis C., Hodgkinson J., 2005, Non-destructive inspection of sandwich and repaired composite laminated structures, Composites Science and Technology 65: 2059-2067.


2. Feraboli P., Kedward K.T., 2006, A new composite structure impact performance assessment program, Composites Science and Technology 66: 1336-1347.


3. Yang L., Yan Y., Kuang N., 2013, Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact, Polymer Testing 32: 1163-1173.


4. Crupi V., Epasto G., Guglielmino E., 2010, Low-velocity impact strength of sandwich materials, Journal of Sandwich Structures and Materials 13(4): 409-426.


5. Wang J., Waas A.M., Wang H., 2013, Experimental and numerical study on the low-velocity impact behavior of foam-core sandwich panels, Composite Structures 96: 298-311.


6. Zhang G., Wang B., Ma L., Wu L., Pan S., Yang J., 2014, Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels, Composite Structures 108: 304-310.


7. Soroush M., Davar A., Khalili S., 2010, Study of the effect of low velocity impact parameters on the impact response of a multilayer composite plate, 10th Conference of the Iranian Aerospace Association.


8. Nasirzadeh R., Sabet A.R., 2014, Study of foam density variations in composite sandwich panels under high velocity impact loading, International Journal of Impact Engineering 63: 129-139.


9. Buragohain M., Velmurugan R., 2011, Study of filament wound grid-stiffened composite cylindrical structures, Composite Structures 93: 1031-1038.


10. Hashin Z., 1980, Failure criteria for unidirectional fiber composites, Journal of Applied Mechanics 47: 329-334.


11. Azarafza R., Davar A., Mahmoodi A., 2017, Three-point bending test of metal and composite sandwich panels with grid stiffened core, Journal of Science and Technology of Composites 3(4): 377-388.


12. Malekzadeh-Fard K., Azarnia A.H., Zolghadr N., 2018, Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact, Journal of Science and Technology of Composites 5(3): 331-342.


13. Aryal B., Morozov E.V., Wang H., Shankar K., Hazell P.J., Escobedo-Diaz J.P., 2019, Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels, Composite Structures 226: 111284.


14. Zhu Y., Sun Y., 2020, Dynamic response of foam core sandwich panel with composite facesheets during low-velocity impact and penetration, International Journal of Impact Engineering 139: 103508.


15. Najafi M., Eslami-Farsani R., 2021, Design and characterization of a multilayered hybrid cored-sandwich panel stiffened by thin-walled lattice structure, Thin-Walled Structures 161: 107514.