کنترل جریان خطای تولیدات پراکنده مجهز به ژنراتور سنکرون به منظور هماهنگی رله های حفاظتی

محورهای موضوعی : مهندسی برق قدرت

اصلان صانعی ¹ ( دانشکده مهندسی برق، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد، ایران )
اسماعیل رک رک ² ( گروه برق دانشکده فنی و مهندسی برق، دانشگاه لرستان، لرستان، ایران )
فرهاد نامداری ³ ( گروه برق دانشکده فنی و مهندسی برق، دانشگاه لرستان، لرستان، ایران )

تاریخ دریافت : 1401/07/16 تاریخ پذیرش : 1401/09/27 تاریخ انتشار : 1402/03/01

کلید واژه: رله‌های اضافه جریان, تولید پراکنده, تپ‌چنجر ترانسفورماتور, ژنراتور سنکرون,

چکیده مقاله :

حضور گسترده تولیدات پراکنده (DG) با بالا بردن سطح اتصال کوتاه، باعث از بین رفتن هماهنگی ادوات حفاظتی در سیستم توزیع می‌شود. با توجه به این که DG‌های از نوع ماشین سنکرون (SMDG) بیشترین مشکل را برای هماهنگی سیستم (رله‌های اضافه جریان) ایجاد می‌کنند؛ در این پایان‌نامه کنترل جریان خروجی ژنراتورهای سنکرون توسط تغییر تپ‌چنجر ترانسفورماتور متصل به آن، هنگام وقوع خطا پیشنهاد شده است. در این روش، مشارکت SMDG‌ها در تغذیه‌ی جریان خطا، با کنترل تپ‌چنجر، محدود می‌شود. قبل از وقوع خطا و متناسب با شرایط سیستم تپ‌چنجر ترانسفورماتور متصل به ژنراتور سنکرون تغییر کرده و باعث کاهش جریان در هنگام بروز خطا می‌شود. روش پیشنهادی روی یک سیستم توزیع نمونه در ETAP پیاده‌سازی شده است؛ نتایج حاصل از شبیه‌سازی کارایی روش پیشنهادی را تأیید می‌کند.

چکیده انگلیسی:

The presence of distributed generation sources (DGs) will affect the extent and duration of system failures. This will inevitably require the need to review the functioning of the system of protection and re-coordination of the relevant equipment. Because the lack of an appropriate coordination between the DG units connected to a distribution system could lead to the exchange of power between these units and the system's instability, improper operation of the system of protection or the unintended islanding of a part of the system. Due to the fact that synchronous machine type DGs (SMDGs) are the most problematic for system coordination (over-current relays) than other types of DGs; in this paper, controlling the output current of generators Synchronization is proposed by tap changer of the transformer connected to it. In this method, the SMDG's participation in the flow of error is limited by the control of the pincer. Before the fault occurred and in accordance with the system conditions, the transformer tapping device connected to the synchronous generator has been changed and it reduces the flow during an error. This strategy, in addition to reducing the generation error of the generators and transformer assembly installed as a dispersed generation source, also increases the permeability coefficient of these sources. The proposed technique is implemented on a sample distribution system in the ETAP software; the results of the simulation show the effectiveness of the proposed method.

منابع و مأخذ:

[1]      H. L. Willis and L. Philipson, Understanding Electric Utilities and De-Regulation. CRC Press, 2018. doi: 10.1201/9781420028263.

[2]      N. Hadjsaid, J.-F. Canard, and F. Dumas, “Dispersed generation impact on distribution networks,” IEEE Computer Applications in Power, vol. 12, no. 2, pp. 22–28, Apr. 1999, doi: 10.1109/67.755642.

[3]      T. Griffin, K. Tomsovic, D. Secrest, and A. Law, “Placement of dispersed generation systems for reduced losses,” in Proceedings of the 33rd Annual Hawaii International Conference on System Sciences, p. 9. doi: 10.1109/HICSS.2000.926773.

[4]      H. Zareipour, K. Bhattacharya, and C. A. Cañizares, “Distributed generation: Current status and challenges,” ResearcheGate, vol. 8, no. 1, 2004, Accessed: Jan. 01, 2004. [Online]. Available: www.researchgate.net/publication/228586297_Distributed_generation_Current_status_and_challengs

[5]      E. Marmolejo, C. Duque, M. T. Torres, G. Ramos, and A. Torres, “Analysis of the prospects for distributed generation (DG) for colombian electric power sector,” in IEEE PES Power Systems Conference and Exposition, 2004., pp. 640–647. doi: 10.1109/PSCE.2004.1397530.

[6]      E. M. Petrie, H. L. Willis, and M. Takahashi, “Distributed generation in developing countries,” Cogeneration and On-Site Power Production, vol. 33, no. 1, pp. 41–49, 2001.

[7]      T. Ackermann, G. Andersson, and L. Söder, “Distributed generation: a definition,” Electric Power Systems Research, vol. 57, no. 3, pp. 195–204, Apr. 2001, doi: 10.1016/S0378-7796(01)00101-8.

[8]      T. M. de Britto, D. R. Morais, M. A. Marin, J. G. Rolim, H. H. Zurn, and R. F. Buendgens, “Distributed generation impacts on the coordination of protection systems in distribution networks,” in 2004 IEEE/PES Transmision and Distribution Conference and Exposition: Latin America (IEEE Cat. No. 04EX956), pp. 623–628. doi: 10.1109/TDC.2004.1432451.

[9]      C. J. Mozina, “Impact of Smart Grids and Green Power Generation on Distribution Systems,” IEEE Trans Ind Appl, vol. 49, no. 3, pp. 1079–1090, May 2013, doi: 10.1109/TIA.2013.2253292.

[10]     N. Nimpitiwan, G. T. Heydt, R. Ayyanar, and S. Suryanarayanan, “Fault Current Contribution from Synchronous Machine and Inverter Based Distributed Generators,” IEEE Transactions on Power Delivery, vol. 22, no. 1, pp. 634–641, Jan. 2007, doi: 10.1109/TPWRD.2006.881440.

[11]     R. A. Walling, R. Saint, R. C. Dugan, J. Burke, and L. A. Kojovic, “Summary of Distributed Resources Impact on Power Delivery Systems,” IEEE Transactions on Power Delivery, vol. 23, no. 3, pp. 1636–1644, Jul. 2008, doi: 10.1109/TPWRD.2007.909115.

[12]     S.-Y. Kim, W.-W. Kim, and J.-O. Kim, “Determining the location of superconducting fault current limiter considering distribution reliability,” IET Generation, Transmission & Distribution, vol. 6, no. 3, p. 240, 2012, doi: 10.1049/iet-gtd.2011.0287.

[13]     H. Yazdanpanahi, W. Xu, and Y. W. Li, “A Novel Fault Current Control Scheme to Reduce Synchronous DG’s Impact on Protection Coordination,” IEEE Transactions on Power Delivery, vol. 29, no. 2, pp. 542–551, Apr. 2014, doi: 10.1109/TPWRD.2013.2276948.

[14]     S. M. Brahma and A. A. Girgis, “Development of Adaptive Protection Scheme for Distribution Systems with High Penetration of Distributed Generation,” IEEE Transactions on Power Delivery, vol. 19, no. 1, pp. 56–63, Jan. 2004, doi: 10.1109/TPWRD.2003.820204.

[15]     J. K. Tailor and A. H. Osman, “Restoration of fuse-recloser coordination in distribution system with high DG penetration,” in 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, Jul. 2008, pp. 1–8. doi: 10.1109/PES.2008.4596422.

[16]     S. Chaitusaney and A. Yokoyama, “Prevention of Reliability Degradation from Recloser–Fuse Miscoordination Due to Distributed Generation,” IEEE Transactions on Power Delivery, vol. 23, no. 4, pp. 2545–2554, Oct. 2008, doi: 10.1109/TPWRD.2007.915899.

[17]     S. Chaitusaney and A. Yokoyama, “An Appropriate Distributed Generation Sizing Considering Recloser-Fuse Coordination,” in 2005 IEEE/PES Transmission & Distribution Conference & Exposition: Asia and Pacific, pp. 1–6. doi: 10.1109/TDC.2005.1546838.

[18]     S. Chaitusaney and A. Yokoyama, “Impact of protection coordination on sizes of several distributed generation sources,” in 2005 International Power Engineering Conference, 2005, pp. 669-674 Vol. 2. doi: 10.1109/IPEC.2005.206992.

[19]     G. Tang and R. Iravani, “Application of a fault current limiter to minimize distributed generation impact on coordinated relay protection,” ResearcheGate, pp. 1–6, Jan. 2005, Accessed: Jan. 01, 2005. [Online]. Available: https://www.researchgate.net/publication/228677545_Application_of_a_fault_current_limiter_to_minimize_distributed_generation_impact_on_coordinated_relay_protection

[20]     T. Sato et al., “Study on the Effect of Fault Current Limiter in Power System with Dispersed Generators,” IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 2331–2334, Jun. 2007, doi: 10.1109/TASC.2007.899884.

[21]     J. R. S. S. Kumara, A. Atputharajah, J. B. Ekanayake, and F. J. Mumford, “Over current protection coordination of distribution networks with fault current limiters,” in 2006 IEEE Power Engineering Society General Meeting, 2006, p. 8 pp. doi: 10.1109/PES.2006.1709251.

[22]     F. Viawan, D. Karlsson, A. Sannino, and J. Daalder, “Protection Scheme for Meshed Distribution Systems with High Penetration of Distributed Generation,” in 2006 Power Systems Conference: Advanced Metering, Protection, Control, Communication, and Distributed Resources, 2006, pp. 99–104. doi: 10.1109/PSAMP.2006.285378.

[23]     G. Benmouyal et al., “IEEE standard inverse-time characteristic equations for overcurrent relays,” IEEE Transactions on Power Delivery, vol. 14, no. 3, pp. 868–872, Jul. 1999, doi: 10.1109/61.772326.

[24]     J. Pasic, “Approach to faulted line impedance calculation,” in 2012 16th IEEE Mediterranean Electrotechnical Conference, Mar. 2012, pp. 1121–1124. doi: 10.1109/MELCON.2012.6196625.

[25]     B. Adkins and R. G. Harley, The General Theory of Alternating Current Machines: Application to Practical Problems. Dordrecht: Springer Netherlands, 1978. doi: 10.1007/978-94-009-5802-9.

[26]     “IEEE Guide for the Application Operation, and Coordination of High-Voltage (>1000 V) Current-Limiting Fuses,” in IEEE Std C37.48.1-2011 (Revision of IEEE Std C37.48.1-2011) vol., no., pp.1-87, 3 April 2012, doi: 10.1109/IEEESTD.2012.6178752.

[27]      “IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices,” in IEEE Std C37.41-2008 (Revision of IEEE Std C37.41-2000), vol., no., pp.1-96, 13 March 2009, doi: 10.1109/IEEESTD.2009.4803852

[28]     IEC/IEEE 60214-2:2019, “Tap-changer-Part 2: Application guide,” 2019.

[29]     IEC 60038:2009+AMD1:2021 CSV Consolidated version, “Standard Voltages,” 2021.

[30]     IEC 60034-1:2022 RLV Redline version, “Rotating Electrical Machine Part 1: Rating and Performance,” 2022.

[31]     IEC 61850-7-4, “Communication networks and systems in substations, Part 7-4: Basic communication structure for substation and feeder equipment – Compatible logical node classes and data classes,” 2003.