یک مبدل دو ورودی جدید با کلیدزنی نرم برای سیستم های هیبرید انرژی سبز
محورهای موضوعی : مهندسی برق الکترونیک
احمد عبدالکاظم عیسی
1
,
محمد حسین ارشادی
2
1 - دانشکده مهندسی برق،واحد اصفهان (خوراسگان)، دانشگاه آزاد اسلامی، خوراسگان، اصفهان، ایران
2 - دانشکده مهندسی برق،واحد خمینی شهر، دانشگاه آزاد اسلامی،خمینی شهر، ایران
کلید واژه: مبدل دو ورودی, کلیدزنی نرم, بهره ولتاژ بالا, کلیدزنی در ولتاژ صفر.,
چکیده مقاله :
در این مقاله یک مبدل دو ورودی جدید با کلیدزنی در ولتاژ صفر برای سیستمهای هیبرید انرژی سبز ارایه شده است. در مبدل پیشنهادی از یک مدار کمکی جدید برای ایجاد شرایط کلیدزنی در ولتاژ صفر با کمترین تعداد المان کمکی استفاده شده است. مدار کمکی نه تنها شرایط کلیدزنی در ولتاژ صفر را فراهم می کند بلکه انرژی سلف نشتی را نیز در خود جذب کرده و مانع جهشهای ولتاژ دو سر سوییچهای اصلی مدار می شود. از طرفی استفاده از سلفهای تزویج شده نیز بهره مبدل را افزایش داده و استرس ولتاژ روی سوییچها را به شدت کاهش می دهد. مبدل پیشنهادی در توان 120 وات طراحی و در نرم افزار PSpice شبیه سازی شده استو همچنین برای اثبات تحلیلهای تئوری مدار یک نمونه آزمایشگاهی از آن ساخته شده است.
In this paper, a new two-input converter with zero voltage switching for green energy hybrid systems is presented. In the proposed converter, a new auxiliary circuit is used to create zero voltage switching with the least number of auxiliary elements. The auxiliary circuit not only provides zero voltageswitching conditions, but also absorbs the energy of the leakage inductance and prevents voltage spikesacross the main switches. On the other hand, the use of coupled-inductors also increases the gain of the converter and greatly reduces the voltage stress on the switches. The proposed converter has been designed with a 120 watts power and simulated in PSICE software, and also a prototype has been made to prove the theoretical analysis of the circuit.
[1] A. Iranpour Mobarakeh, R. Sadeghi, H. Saghafiesfahani and M. Delshad, 'Techno-economic energy management of micro-grid in the presence of distributed generation sources based on demand response programs" ,International Journal of Electrical Power & Energy Systems, vol. 141, no. 2, pp. 128-134, May 2022, doi:10.1016/j.ijepes.2022.108169.
[2] P. C. Heris, Z. Saadatizadeh and E. Babaei, "A New Two Input-Single Output High Voltage Gain Converter With Ripple-Free Input Currents and Reduced Voltage on Semiconductors," in IEEE Transactions on Power Electronics, vol. 34, no. 8, pp. 7693-7702, Aug. 2019, doi: 10.1109/TPEL.2018.2880493.
[3] N. Zanatta, T. Caldognetto, D. Biadene, G. Spiazzi and P. Mattavelli, "A Two-Stage DC-DC Isolated Converter for Battery-Charging Applications," in IEEE Open Journal of Power Electronics, vol. 4, pp. 343-356, 2023, doi: 10.1109/OJPEL.2023.3271227.
[4] D. Liu and H. Li, "A ZVS Bi-Directional DC- DC Converter for Multiple Energy Storage Elements," Power Electronics, IEEE Transactions on, vol. 21, pp. 1513-1517, 2006, doi: 10.1109/TPEL.2006.882450.
[5] D. Liu and H. Li, "A novel multiple-input ZVS bidirectional DC-DC converter,"in Industrial Electronics Society, 2005, pp. 134-140, doi: 10.1109/IECON.2005.1568969 .
[6] R. Wai, C. Lin, J. Liaw, and Y. Chang, "Newly designed ZVS multi input converter," Industrial Electronics,IEEE Transactionson, vol.58, pp. 555566, 2011, doi: 10.1109/TIE.2010.2047834.
[7] Y. Liu and Y. Chen, "A systematic approach to synthesizing multii nput DC–DC converters," IEEE Transactions on Power Electronics, vol. 24, no. 1, pp. 116-127, 2009, doi: 10.1109/TPEL.2008.2009170.
[8] A. Lavanya, J. D. Navamani, K. Vijayakumar, and R. Rakesh, "Multiinput DC-DC converter topologies-a review," in 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), 2016, pp. 2230-2233, doi: 10.1109/ICEEOT.2016.7755089.
[9] K. P. Yalamanchili, M. Ferdowsi, and K. Corzine, "New double input dcdc converters for automotive applications," in 2006 IEEE Vehicle Power and Propulsion Conference, 2006, pp. 106. 114 , doi: 10.1109/VPPC.2006.364366.
[10] Y. Chen, Y. Liu, and S. Lin, "Double-input PWM DC/DC converter for high-/low-voltage sources," IEEE Transactions on Industrial Electronics, vol. 53, no. 5, pp. 1538-1545, 2006, doi: 10.1109/TIE.2006.882001.
[11] A. IranpourMobarakeh, R. Sadeghi, H. SaghafiEsfahani and M. Delshad," Optimal planning and operation of energy hub by considering demand response algorithms and uncertainties based on problem-solving approach in discrete and continuous space", Electric Power Systems Research, vol. 214, Part A,2023,108859,doi:10.1016/j.epsr.2022.108859.
[12] A. T. Harchegani and M. Mahdavi, "A New Soft Switching Dual Input Converter for Renewable Energy Systems," Journal of Power Electronics, vol. 17, no. 5, pp. 1127-1136, 2017, doi: 10.6113/JPE.2017.17.5.1127.
[13] K. Gummi and M. Ferdowsi, "Double-input dc–dc power electronic converters for electric-drive vehicles—Topology exploration and synthesis using a single-pole triple-throw switch," IEEE Transactions on Industrial Electronics, vol. 57, no. 2, pp. 617-623, 2010, doi: 10.1109/TIE.2009.2032762.
[14] M. Forouzesh, Y. P. Siwakoti, S. A. Gorji, F. Blaabjerg, and B. Lehman, "Step-up DC–DC converters: a comprehensive review of voltage-boosting techniques, topologies, and applications," IEEE Transactions on Power Electronics, vol. 32, no. 12, pp. 9143-9178, 2017, doi: 10.1109/TPEL.2017.2652318.
[15] G. Palumbo and D. Pappalardo, "Charge pump circuits: An overview on design strategies and topologies," IEEE Circuits and Systems Magazine, vol. 10, no. 1, pp. 31-45, 2010, doi: 10.1109/MCAS.2009.935695.
[16] J. A. Starzyk, Y.-W. Jan, and F. Qiu, "A DC-DC charge pump design based on voltage doublers," IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 48, no. 3, pp. 350-359, 2001, doi: 10.1109/81.915390.
[17] M. Delshad and H. Farzanehfard, "A new isolated bidirectional buck-boost PWM converter," 1st Power Electronic & Drive Systems & Technologies Conference (PEDSTC), Tehran, Iran, 2010, pp. 41-45, doi: 10.1109/PEDSTC.2010.5471860.
[18] M. S. Makowski, "Realizability conditions and bounds on synthesis of switched-capacitor DC-DC voltage multiplier circuits," IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 44, no. 8, pp. 684-691, 1997, doi: 10.1109/81.611263.
[19] Y. Lei and R. C. N. Pilawa-Podgurski, "A general method for analyzing resonant and soft-charging operation of switched-capacitor converters," IEEE Transactions on Power Electronics, vol. 30, no. 10, pp. 5650-5664, 2014, doi: 10.1109/TPEL.2014.2377738.
[20] H. S. Chung, "Design and analysis of a switched-capacitor-based stepup DC/DC converter with continuous input current," IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 46, no. 6, pp. 722-730, 1999, doi: 10.1109/81.768828.
[21] F. Ghasemi, M. R. Yazdani and M. Delshad, "Step-Up DC-DC Switching Converter With Single Switch and Multi-Outputs Based on Luo Topology," in IEEE Access, vol. 10, pp. 16871-16882, 2022, doi: 10.1109/ACCESS.2022.3150316.
[22] F. L. Luo, "Luo-converters, voltage lift technique," in PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No. 98CH36196), 1998, vol. 2: IEEE, pp. 1783-1789.
[23] F. L. Luo, "Luo-converters, a series of new DC-DC step-up (boost) conversion circuits," in Proceedings of Second International Conference on Power Electronics and Drive Systems, 1997, vol. 2: IEEE, pp. 882- 888, doi: 10.1109/PEDS.1997.627511.
[24] F. L. Luo, "Six self-lift DC-DC converters, voltage lift technique," IEEE Transactions on Industrial Electronics, vol. 48, no. 6, pp. 1268-1272, 2001, doi: 10.1109/41.969408.
[25] M. Zhu and F. Luo, "Series SEPIC implementing voltage-lift technique for DC–DC power conversion," IET Power Electronics, vol. 1, no. 1, pp. 109-121, 2008, doi: 10.1049/iet-pel:20060494.
[26] Y. Jiao, F. Luo, and M. Zhu, "Voltage-lift-type switched-inductor cells for enhancing DC–DC boost ability: principles and integrations in Luo converter," IET Power electronics, vol. 4, no. 1, pp. 131-142, 2011, doi: 10.1049/iet-pel.2010.0021.
[27] Y. Tang, T. Wang, and D. Fu, "Multicell switched-inductor/switched capacitor combined active-network converters," IEEE Transactions on Power Electronics, vol. 30, no. 4, pp. 2063-2072, 2014, doi: 10.1109/TPEL.2014.2325052.
[28] M. Delshad and E. Shahri, "A new soft switching interleaved boost converter with high voltage gain," The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference, 2011, pp. 744-747, doi: 10.1109/ECTICON.2011.5947947
[29] M. K. Kazimierczuk, Pulse-width modulated DC-DC power converters. John Wiley & Sons, 2015.
[30] M. Delshad, A. T. Harchegani, M. Karimi and M. Mahdavi, "A new ZVT Multi Input Converter for hybrid sources systems," 2016 International Conference on Applied Electronics (AE), Pilsen, Czech Republic, 2016, pp. 61-64, doi: 10.1109/AE.2016.7577242
[31] B. W. Williams, "Unified synthesis of tapped-inductor DC-to-DC converters," IEEE Transactions on Power Electronics, vol. 29, no. 10, pp. 5370-5383, 2013, doi: 10.1109/TPEL.2013.2291561.
[32] D. A. Grant, Y. Darroman, and J. Suter, "Synthesis of tapped-inductor switched-mode converters," IEEE Transactions on Power Electronics, vol. 22, no. 5, pp. 1964-1969, 2007, doi: 10.1109/TPEL.2007.904215.
[33] M. Vesali, H. Ranjbar and A. Motamedi-Nasab ," A Two Input High Step Converter with Zero Current Switching Condition for Switches Turn-On Instances', Technovations of Electrical Engineering in Green Energy System, vol. 1, no. 2, pp. 63-76, 2022; doi: 10.30486/teeges.2022.1960073.1017
