Optimal Location of the Intermediate Band Gap Energy in the Intermediate Band Solar Cell
محورهای موضوعی :
Majlesi Journal of Telecommunication Devices
Mohammad Ershadi
1
(
Department of Skills and Entrepreneurship, Isfahan Branch, Islamic Azad University, Isfahan, Iran
)
تاریخ دریافت : 1401/07/16
تاریخ پذیرش : 1401/08/19
تاریخ انتشار : 1401/09/10
کلید واژه:
band position,
Efficiency,
maximum efficiency,
detailed balance theory,
چکیده مقاله :
The purpose of this study is to determine the optimum location for intermediate band in the middle of band gap of an ideal solar cell for maximum performance. By changing the location of the intermediate band, output current and therefore performance can be changed. Choosing the best location in terms of solar cell energy gap and how to change the performance by means of the location of intermediate band has the important role in the energy band gap engineering. This matter in the known methods of the intermediate bands realization such as quantum well and quantum dots can be used for selecting the type of semiconductor in quantum well or quantum dot and also for selecting dimension of quantum dot or quantum well. Conclusion of this paper is by increasing energy gap, the optimal location of intermediate band for cells with one intermediate band, will be closer to the middle of the energy gap.
منابع و مأخذ:
[1] Shockley W. & Queisser H. J. “Detailed balance limit of efficiency of p-n junction solar cells”. Appl. Phys. 32, 510-519 (1961).
[2] Luque A. & Marti A. “Increasing the efficiency of ideal solar cells by photon induced transitions at intermediate levels”. Phys. Rev. Lett. 78, 5014-5017 (1997).
[3] Andrew S. Brown and Martin A. Green “Intermediate band solar cell with many bands: Ideal performance”. J. Appl. Phys. 94, No. 9, (2003).
[4] Luque A. Linares P. G. Antolin E. Canovas E. Farmer C. D. Stanley C. R. and Marti A. “Multiple levels in intermediate band solar cells”. Appl. Phys. Lett. 96, 013501 (2010).
[5] Nozawa T. and Arakawa Y. “Detailed balance limit of the efficiency of multilevel intermediate band solar cells” Phys. Lett. 98, 171108 (2011).
[6] Henry C. H. , J. Appl. Phys. 51, 4494, (1980).
[7] Luque A. and Marti A. “Photovoltaics: Towards the intermediate band”. Nature Photon. 5, 137-138 (2011).
[8] Luque A. Marti A. and Stanley C. “Understanding intermediate band solar cells” Nature Photon. 5, 146-152 (2012).
[9] Bruns, W. Seifert, P. Wawer, H. Winnicke, D. Braunig, and H. Wagemann, “Improved efficiency of crystalline silicon solar cells due to he+ implantation,” Applied Physics Letters, vol. 64, no. 20, pp. 2700–2, 1994.
J. Keevers and M. A. Green, Sol. Energy Mater. Sol. Cells 41 195 (1996).
Kasai, T. Sato, and H. Matsumura, “Impurity photovoltaic effect in crystalline silicon solar cells,” in Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997 (Cat. No.97CB36026), 1997, pp. 215–18.
P. Bremner, R. Corkish, and C. B. Honsberg, “Detailed balance efficiency limits with quasi-fermi level variations,” IEEE Transactions on Electron Devices, vol. 46, no. 10, pp. 1932–9, 1999.
Green, “Prospects for photovoltaic efficiency enhancement using low-dimensional structures,” Nanotechnology, vol. 11, no. 4, pp. 401–5, 2000.
Barnham, B. Braun, J. Nelson, M. Paxman, C. Button, J. Roberts, and C. Foxon, “Short-circuit current and energy efficiency enhancement in a low-dimensional structure photovoltaic device,” Applied Physics Letters, vol. 59, no. 1, pp. 135–7, 1991.
Mart´ı, L. Cuadra, and A. Luque, “Quantum dot intermediate band solar cell,” in Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference, Anchorage, AK, USA, 2000, pp. 940–3.
Mart´ı, E. Antol´ın, C. Stanley, C.Farmer, N. L´opez, P. D´ıaz, E. C´anovas, P. Linares, and A. Luque, “Production of photocurrent due to intermediate-to-conduction-band transitions: A demonstration of a key operating principle of the intermediate-band solar cell,” Physical Review Letters, vol. 97, no. 24, pp. 247 701/1–4, 2006.
G. Norman, M. C. Hanna, P. Dippo, D. H. Levi, R. C. Reedy, J. S.Ward, and M.M. Al-Jassim, “InGaAs/GaAs QD superlattices: MOVPE growth, structural and optical characterization, and application in intermediate-band solar cells,” in Conference Record of the 31st IEEE Photovoltaic Specialists Conference, Orlando, FL, USA, 2005, pp. 43–8.
Y. Levy and C. Honsberg, “Nanostructured absorbers for multiple transition solar cells,” IEEE Transactions on Electron Devices, vol. -, no. -, p. in print, 2008.
Yu, W. Walukiewicz, J.W. Ager III, D. Bour, R. Farshchi, O. Dubon, S. Li, I. Sharp, and E. Haller, “Multiband GaNAsP quaternary alloys,” Applied Physics Letters, vol. 88, no. 9, p. 092110, 2006.
Shan, W. Walukiewicz, J.W. Ager III, E. Haller, J. Geisz, D. Friedman, J. Olson, and S. Kurtz, “Band anticrossing in gainnas alloys,” Physical Review Letters, vol. 82, no. 6, pp. 1221 – 4, 1999.
Walukiewicz, K. Yu, J. Wu, J.W. Ager III, W. Shan, M. Scrapulla, O. Dubon, and P. Becla, “Highly mismatched alloys for intermediate band solar cells,” Thin-Film Compound Semiconductor Photovoltaics. Symposium (Materials Research Society Symposium Proceedings Vol.865), pp. 125–30, 2005.
