Designing a New CVR Receiver and Investigating the Problem with Simultaneous Signal with Applying Approach in Electronic Warfare
محورهای موضوعی : Majlesi Journal of Telecommunication Devices
Afsaneh Asgharzadeh
1
(Islamic Azad University, North Tehran Branch)
Mohammad Mirzaei
2
()
کلید واژه: Function, Signal, Electronic Warfare, Crystal Video Receiver,
چکیده مقاله :
In order to launch different receivers in electronic warfare, side-circuits are required to detect the presence of a pulse at the receiver input and to report it after making sure that the receiver output is not due to system noise alone. In practice, a crystal video receiver (CVR) is used for this purpose. This receiver provides the required time information (or domain related information) to the other part of an electronic warfare receiver by extracting the received RF signal wave envelope. In this paper, after a conceptual overview of the structure of this receiver, the analysis of its function (sensitivity) will be dealt with. Moreover, some important issues in its design will be discussed. In addition, since the IFM and CVR receivers are not capable of processing simultaneous pulses or pulses coupled with the CW, some further steps are taken to maintain system efficacy under such conditions.
[1] R.E. Best, Phase-Locked Loops Design, Simulation, and Applications, 5th edn. (McGraw Hill, New York, 2003).
[2] I. Carugati, P. Donato, S. Maestri, D. Carrica, M. Benedetti, Frequency adaptive PLL for polluted single-phase grids. IEEE Trans. Power Electron. 27(5), 2396–2404 (2012).
[3] I. Carugati, S. Maestri, P. Donato, D. Carrica, M. Benedetti, Variable sampling period filter PLL for distorted three-phase systems. IEEE Trans. Power Electron. 27(1), 321–330 (2012).
[4] F. Colodro, A. Torralba, Frequency-to-digital conversion based on sampled phase-locked loop withthird-order noise shaping. IET Electron. Lett. 47(19), 1069–1070 (2011).
[5] S. Engelberg, E. Chalom, Measuring the spectral content of a signal: an introduction. IEEE Instrum. Meas. Mag. 13(6), 34–38 (2010).
[6] G. Fedele, A. Ferrise, A frequency-locked-loop filter for biased multi-sinusoidal estimation. IEEE Trans. Signal Process. 62(5), 1125–1134 (2014).
[7] H. Gheidi, A. Banai, An ultra-broadband direct demodulator for microwave FM receivers. IEEE Trans.Microw. Theory Tech. 59(8), 2131–2139 (2011).
[8] W. Godycki, R. Dokania, X.Wang, A. Apsel, A high-speed, on-chip implementation of Teager Kaiser operator for in-band interference rejection, in Proceedings of the IEEE Asian Solid State Circuits conference (A-SSCC), Beijing, China, pp. 1–4 (2010).
[9] S. Kadam, D. Sasidaran, A. Awawdeh, L. Johnson, M. Soderstrand, Comparison of various numerically controlled oscillators, in Proceedings of the 45th Midwest Symposium on Circuits and Systems (MWSCAS), Tulsa, USA, vol. 3, pp. 200–202 (2002).
[10] M. Kunita, M. Sudo, S. Inoue, M. Akahane, A new method for blood velocity measurements using ultrasound FMCW signals. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 57(5), 1064–1076 (2010).
[11] R. Lyons, A. Bell, The swiss army knife of digital networks. IEEE Signal Process. Mag. 21(3), 90–100 (2004).
[12] B.P. McGrath, D.G. Holmes, J.J.H. Galloway, Power converter line synchronization using a discrete Fourier transform (DFT) based on variable sampling rate. IEEE Trans. Power Electron. 20(4), 877–884 (2005).
[13] M.A. Perez, J.R. Espinoza, L.A. Moran, M.A.Torres, E.A. Araya,Arobust phase-locked loop algorithm to synchronize static power converters with polluted AC systems. IEEE Trans. Ind. Electron. 55(5), 2185–2192 (2008).
[14] R. Punchalard, J. Koseeyaporn, P. Wardkein, Novel digital FM demodulation, in Proceedings of the IEEE Region 10 Conference (TENCON), Singapore, pp. 1–4 (2009).
[15] F. Ramirez, V. Arana, A. Suarez, Frequency demodulator using an injection-locked oscillator: analysis and design. IEEE Trans. Microw. Wirel. Compon. Lett. 18(1), 43–45 (2008).
