The Influence of Electromagnetic Vibration on the Microstructure and Corrosion Behavior of Incoloy 825 Superalloy Weld Metal
محورهای موضوعی : Journal of Environmental Friendly Materials
A. Pourjafar
1
(Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran.)
R. Dehmolaei
2
(Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran.)
کلید واژه:
چکیده مقاله :
[1] E. B. Howard and L. G. Timoty, Desk Edition, Metals Handbook, ASM International, United States of America, (1985).
[2] E.F. Bradly, Superalloys A Technical Guide, 2nd Edition, ASM International, Metalspark, OH44073, (1988).
[3] M.J. Donachie, S.J. Donachie, SuperalloysA Technical Guide, 2nd Edition, ASM International, (2002).
[4] J. R. Davis et al, ASM Specialty Handbook:Nickel, Cobalt, and Their Alloys, Printed in the United States of America, (2000).
[5] R. Dehmolaei, M. Shamanian, A. Kermanpur, Mater.Charact., 59(2008), 1447.
[6] JR. Daris, Metallurgical processing and properties of superalloys. ASM handbooks; 16.18–16-23, (1999).
[7] R. Coppola, S. R. Fiorentin, Nucl. Instrum. Methods. Phys. Res., B22(1987), 564.
[8] Special Metals Corporation, Incoloy Alloy 825, Publication Number SMC-030, (2004).
[9] H. Aytekin, Y. Akcin, Mater. Des., 50(2013),515.
[10] J. C. Lippold, Weld. J., 63(1984), 91.
[11] R. S. Dutta, R. Purandare, A. Lobo and S. K. Kulkarni, Corros. Sci., 46(2004), 2937.
[12] S. Kou: Welding metallurgy, second e.d. , Hoboken, John Wiley & Sons Inc, (2003).
[13] T. Bellezze, G. Roventi andR. Fratesi, Electrochim. Acta, 49(2004), 3005.
[14] P. E. Manning, Corrosion, 36(1980), 468.
[15] F. Cardareli, Materials Handbook.A Concise Desktop Reference, Springer-Verlag London, (2008).
[16] H. Mesmar, E. Gajam, F. E. Zrarrog, Int. J. Adv. Technol. Eng. Res., 5(2015).
[17] K. Balasubramanian, S.Raghavendran and V. Balusamy, Int. J. Eng. Tech .Sci., 2(2011),253.
[18] W.F.Savage, E. F. Nipess andE. S. Szekeres, Weld. J., 55(1976), 260.
[19] R. Dehmolaei, M. Shamanian, Mater.Charact., 60(2009) 246.
[20] M. Sireesha, V. Shankar, SK. Albert and S. Sundaresan, Mater. Sci. Eng. A, 292(2000), 74.
[21] L. Sundar and D. R. G. Achar, Indian Weld. J., 16(1984), 81.
[22] B. Pucko, V.Gliha , Metallurgija, 44(2005), 103.
[23] S. Kou, Y. Le, weld. J., 64(1985), 51.
[24] J.N. DuPont, C.V. Robino and A.R. Marder, Metall. Mater. Trans. A, 29(1998), 2797.
[25] ASTM. A167.99. Standard Specification of Stainless and Heat Resistant Chromium Nickel Steel Plate, Sheet, and Strip.
[26]CH. Vives., JOM, 50(1998).
[27] Y. G. Zhao, Y. H. Liang, Q. D. Qin, W. Zhou and Q. C. Jiang, ISIJ Int., 44(2004), 1167.
[28] K. Ralstone, N. Birbilis, Corrosion, 66(2010), 075005.
[29] E. Sikora, X. J. Wei and B. A. Shaw, Corrosion, 60(2004), 387.
[30] T.C. Tsai, T.H. Chuang, Mater. Sci. Eng. A, 225(1997), 135.
[31] D. Song, A. B. Ma, J. H. Jiang, P. H. Lin and D. H. Yang, T. Nonferr. Metal. Soc., 19(2009), 1065.
[32] M. Amra, K. Ranjbar, and R. Dehmolaei, ASM Int., (2015).
