Growth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method
محورهای موضوعی : Journal of Physical & Theoretical ChemistryZ. Haghparast 1 , F. Bisepar 2 , S. A. Khorrami 3 , Sh. Moradi 4 , H. Aghaie 5
1 - -
2 - -
3 - -
4 - -
5 - -
کلید واژه: Multi walled carbon nanotube, Thermal chemical vapor deposit, Stainless steel 304, Brass,
چکیده مقاله :
The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especial etching of substrates. The catalystsconsist of a thin layer of Cu deposited on substrates. Morphology and structural information about preparedCNTs were provided by scanning electron microscopy (SEM). Results showed that some nanostructures such assingle and multi walled carbon nanotubes (SWCNTs and MWCNTs), bundle (70-80 nm), nano wire (80-100nm) and amorphous carbon were formed on stainless steel 304 as substrate. Moreover, different kind of carbonnanotubes such as MWCNTs (30-50 tun), nano crystalline diamond (10-30 nm), amorphous carbon, roped (70-80 nm) structures with different sizes grew on the brass substrate as well. In conclusion, we suggest thatstainless steel 304 and brass can be replaced with Si/Si02 as substrate in practical applications.
