Optimizing Channel Configurations to Enhance Thermal Comfort in Connected Enclosed Atrium (Case Studies: Yazd and Tabriz)

محورهای موضوعی : Architecture

Parisa Javid ¹ , Niloufar Nikghadam ² , Alireza Karimpour ³ , Jaleh Sabernejad ⁴

1 - Department of Architecture, ST.C, Islamic Azad University, Tehran, Iran.
2 - Department of Architecture, ST.C, Islamic Azad University, Tehran, Iran.
3 - Department of Architecture, ST.C, Islamic Azad University, Tehran, Iran.
4 - Department of Architecture, ST.C, Islamic Azad University, Tehran, Iran.

تاریخ دریافت : 1404/05/19 تاریخ پذیرش : 1404/06/10 تاریخ انتشار : 1404/06/18

کلید واژه: Thermal comfort, channel configurations, connected atrium, passive systems, Yazd, Tabriz,

چکیده مقاله :

Global challenges, including climate change and rising energy consumption, necessitate sustainable architectural solutions. Optimizing architectural design for passive natural ventilation enhances energy efficiency and reduces reliance on mechanical systems. An investigation was conducted to examine how channel dimensions impact thermal comfort in connected, enclosed atria in Yazd and Tabriz. The objective is to determine channel configurations that maximize year-round thermal comfort while minimizing mechanical heating and cooling. With Rhino software and Honeybee and Ladybug plugins, simulation models were developed. A variety of channel dimensions were tested to determine the optimum PMV values throughout seasonal changes. A variety of channel widths were evaluated for thermal comfort. The atrium and adjoining spaces were improved by enhancing airflow and temperature regulation. In both cities, a 1-meter channel width consistently provided optimal thermal comfort. During winter, PMV should be -3.43, in autumn -0.66, in summer 2.41, and in spring 0.0041. As in Tabriz, the winter PMV is -4.94, the autumn PMV is -0.62, the summer PMV is 0.72, and the spring PMV is -1.13. One-meter channel widths maintain comfort through seasonal temperature variations and environmental conditions, eliminating the need for supplemental heating or cooling. The study highlights the importance of climate-responsive design and optimizing passive ventilation systems to enhance building energy efficiency. As a result, buildings can be designed for both hot and cold climates. Energy-efficient and comfortable architectural solutions are supported. A focus on channel dimensions for optimal natural ventilation is recommended for future building designs in similar climates.

چکیده انگلیسی:

Global challenges, including climate change and rising energy consumption, necessitate sustainable architectural solutions. Optimizing architectural design for passive natural ventilation enhances energy efficiency and reduces reliance on mechanical systems. An investigation was conducted to examine how channel dimensions impact thermal comfort in connected, enclosed atria in Yazd and Tabriz. The objective is to determine channel configurations that maximize year-round thermal comfort while minimizing mechanical heating and cooling. With Rhino software and Honeybee and Ladybug plugins, simulation models were developed. A variety of channel dimensions were tested to determine the optimum PMV values throughout seasonal changes. A variety of channel widths were evaluated for thermal comfort. The atrium and adjoining spaces were improved by enhancing airflow and temperature regulation. In both cities, a 1-meter channel width consistently provided optimal thermal comfort. During winter, PMV should be -3.43, in autumn -0.66, in summer 2.41, and in spring 0.0041. As in Tabriz, the winter PMV is -4.94, the autumn PMV is -0.62, the summer PMV is 0.72, and the spring PMV is -1.13. One-meter channel widths maintain comfort through seasonal temperature variations and environmental conditions, eliminating the need for supplemental heating or cooling. The study highlights the importance of climate-responsive design and optimizing passive ventilation systems to enhance building energy efficiency. As a result, buildings can be designed for both hot and cold climates. Energy-efficient and comfortable architectural solutions are supported. A focus on channel dimensions for optimal natural ventilation is recommended for future building designs in similar climates.

منابع و مأخذ:

Abdullah, A. H., Meng, Q., Zhao, L., & Wang, F. (2009). Field study on indoor thermal environment in an atrium in tropical climates. Building and Environment, 44(2), 431-436.
Al-Masrani, S. M., Al-Obaidi, K. M., Zalin, N. A., & Aida Isma, M. I. (2018). Design Optimization of Solar Shading Systems for Tropical Office Buildings: Challenges and Future Trends. Solar Energy, 170, 849-872. https://doi.org/https://doi.org/10.1016/j.solener.2018.04.047
Aldawoud, A. (2013). The influence of the atrium geometry on the building energy performance. Energy and Buildings, 57, 1-5.
Ashdown, I., Bedocs, L., Carroll, W., de Boer, J., Dehoff, P., Donn, M., Erhorn, H., Escaffre, L., Fontoynont, M., & Greenup, P. (2006). CIE 171:2006 Test Cases to Assess the Accuracy of Lighting Computer Programs.
ASHRAE. (2017). Thermal Environmental Conditions for Human Occupancy. American Society of Heating, Refrigerating, and Air-Conditioning Engineers.
Assadi, M. K., Dalir, F., & Hamidi, A. A. (2011). Analytical model of atrium for heating and ventilating an institutional building naturally. Energy and Buildings, 43(10), 2595-2601. https://doi.org/https://doi.org/10.1016/j.enbuild.2011.05.009
Baghoolizadeh, M., Rostamzadeh-Renani, M., & ... (2023). Improving CO2 concentration, CO2 pollutant, and occupants' thermal comfort in a residential building using genetic algorithm optimization. Energy and …. https://www.sciencedirect.com/science/article/pii/S0378778823003390
Baker, N., & Steemers, K. (2003). Energy and environment in architecture: a technical design guide. Taylor & Francis.
Beyraghshamshir, M., & Sarkardehei, E. (2023). A comparison of the cooling and heating performance of two passive systems of central courtyards and atriums at an elementary school in Yazd City. Solar Energy, 252, 156-162.
Chan, A., & Chow, T. (2014). Thermal performance of air-conditioned office buildings constructed with inclined walls in different climates in China. Applied Energy, 114, 45-57.
Chen, Z., Cui, Y., Zheng, H., & Ning, Q. (2024). Optimization and prediction of energy consumption, light, and thermal comfort in teaching building atriums using NSGA-II and machine learning. Journal of Building Engineering, 86, 108687. https://doi.org/https://doi.org/10.1016/j.jobe.2024.108687
Cheung, T., Schiavon, S., Parkinson, T., Li, P., & Brager, G. (2019). Analysis of the accuracy on PMV – PPD model using the ASHRAE Global Thermal Comfort Database II. Building and Environment, 153, 205-217. https://doi.org/https://doi.org/10.1016/j.buildenv.2019.01.055
Chi, F. a., & Xu, Y. (2022). Building performance optimization for university dormitory through integration of digital gene map into multi-objective genetic algorithm. Applied Energy, 307, 118211.
Chow, W. K. (1996). Assessment of thermal environment in an atrium with air-conditioning. Journal of Environmental Systems, 25(4), 409-420.
Dai, B., Tong, Y., Hu, Q., & Chen, Z. (2022). Characteristics of thermal stratification and its effects on HVAC energy consumption for an atrium building in South China. Energy, 249, 123425.
Fanger, P. (1970). Thermal comfort. Analysis and applications in environmental engineering. Copenhagen: Danish Technical Press.
Freewan, A. A. (2022). Energy-efficient solutions depending on building forms, design with tilted south and north facades. Buildings, 12(6), 753.
Ge, J., Zhao, Y., & Zhao, K. (2021). Impact of a non-enclosed atrium on the surrounding thermal environment in shopping malls. Journal of Building Engineering, 35, 101981.
Guan, Z., Xu, X., Xue, Y., & Wang, C. (2022). Multi-objective optimization design of geometric parameters of atrium in nZEB based on energy consumption, carbon emission, and cost. Sustainability, 15(1), 147.
Guo, F., Miao, S., Xu, S., Luo, M., Dong, J., & Zhang, H. (2025). Multi-Objective Optimization Design for Cold-Region Office Buildings: Balancing Outdoor Thermal Comfort and Building Energy Consumption. Energies, 18(1), 62. https://www.mdpi.com/1996-1073/18/1/62
Hoseinzadeh, S., Nastasi, B., Groppi, D., & Astiaso Garcia, D. (2022). Exploring the penetration of renewable energy at increasing the boundaries of the urban energy system – The PRISMI plus toolkit application to Monachil, Spain. Sustainable Energy Technologies and Assessments, 54, 102908. https://doi.org/https://doi.org/10.1016/j.seta.2022.102908
Huang, C., Zou, Z., Li, M., Wang, X., Li, W., Huang, W., Yang, J., & Xiao, X. (2007). Measurements of indoor thermal environment and energy analysis in a large space building in typical seasons. Building and Environment, 42(5), 1869-1877.
Ibrahim, Y., Kershaw, T., Shepherd, P., & Elkady, H. (2022). Multi-objective optimisation of urban courtyard blocks in hot arid zones. Solar Energy, 240, 104-120.
Jalali, Z., Noorzai, E., & Heidari, S. (2020). Design and optimization of form and facade of an office building using the genetic algorithm. Science and Technology for the Built Environment, 26(2), 128-140.
Ji, Y., Xu, M., Zhang, T., & He, Y. (2023). Intelligent parametric optimization of building atrium design: a case study for a sustainable and comfortable environment. Sustainability, 15(5), 4362.
Jin, J.-T., & Jeong, J.-W. (2014). Optimization of a free-form building shape to minimize external thermal load using genetic algorithm. Energy and Buildings, 85, 473-482.
Khayami, S., Ekhlassi, A., & Rahbar, M. (2023). Effect of Earth-Sheltering and Atrium Form and Proportion Integration on Energy and Lighting Performance Optimization in a Hot, Arid Climate of Mashhad, Iran. Energy efficiency, 16(2), 6.
Khoroshiltseva, M., Slanzi, D., & Poli, I. (2016). A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices. Applied Energy, 184, 1400-1410. https://doi.org/https://doi.org/10.1016/j.apenergy.2016.05.015
Li, Y., Yang, M., Bai, H., Li, R., Liang, J., Huang, J., & Du, Y. (2023). A novel outdoor thermal comfort simulation model for heritage environments (OTC-SM-HE): Verify the effectiveness in Gulangyu, China. Building and Environment, 242, 110568. https://doi.org/https://doi.org/10.1016/j.buildenv.2023.110568
Liu, P.-C., Lin, H.-T., & Chou, J.-H. (2009). Evaluation of buoyancy-driven ventilation in atrium buildings using computational fluid dynamics and reduced-scale air model. Building and Environment, 44(9), 1970-1979.
Liu, X., Liu, X., & Zhang, T. (2020). Influence of air-conditioning systems on buoyancy-driven air infiltration in large space buildings: A case study of a railway station. Energy and Buildings, 210, 109781.
Lu, Y., Dong, J., & Liu, J. (2020). Zonal modelling for thermal and energy performance of large space buildings: A review. Renewable and Sustainable Energy Reviews, 133, 110241.
Lu, Y., Dong, J., Wang, Z., Wang, Y., Wu, Q., Wang, L., & Liu, J. (2021). Evaluation of stack ventilation in a large space using zonal simulation and a reduced-scale model experiment with particle image velocimetry. Journal of Building Engineering, 34, 101958.
Moosavi, L., Mahyuddin, N., Ab Ghafar, N., & Ismail, M. A. (2014). Thermal performance of atria: An overview of natural ventilation effective designs. Renewable and Sustainable Energy Reviews, 34, 654-670.
Pilechiha, P., Norouziasas, A., & ... (2022). Evaluation of occupants' adaptive thermal comfort behaviour in naturally ventilated courtyard houses. Smart and Sustainable …. https://doi.org/10.1108/sasbe-02-2021-0020
Proietti, S., Desideri, U., Sdringola, P., & Zepparelli, F. (2013). Carbon footprint of a reflective foil and comparison with other solutions for thermal insulation in building envelope. Applied Energy, 112, 843-855. https://doi.org/https://doi.org/10.1016/j.apenergy.2013.01.086
Romero-Odero, J. A., Galán-Marín, C., & Rivera-Gómez, C. (2020). Atrium impact on a school-building: thermal performance in a hot climate. Proceedings,
Sadeghipour Roudsari, M., & Pak, M. (2013). Ladybug: A parametric environmental plugin for Grasshopper to help designers create an environmentally-conscious design. Proceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association, 3128-3135.
Shaeri, J., & Mahdavinejad, M. (2022). Prediction indoor thermal comfort in traditional houses of Shiraz with PMV/PPD model. International Journal of Ambient …. https://doi.org/10.1080/01430750.2022.2092774
Shi, K., Ren, J., Cao, X., & Kong, X. (2024). Optimizing thermal comfort in an atrium-structure library: On-site measurement and TRNSYS-CONTAM co-simulation. Building and Environment, 266, 112041.
Soflaee, F., & Shokouhian, M. (2005). Natural Cooling Systems in Sustainable Traditional Architecture of Iran. Printed in Proceeding of the International Conference on Passive and Low Energy Cooling For The Built Environment (PALENC 2005), Greece, Santorini,
Sokkar, R., & Alibaba, H. Z. (2020). Thermal comfort improvement for atrium building with double-skin skylight in the Mediterranean climate. Sustainability, 12(6), 2253.
Su, M., Jie, P., Zhu, S., Li, P., Gao, N., Causone, F., Wu, X., Yang, X., & Shi, X. (2025). Evaluating the thermal environment of a large atrium in an office building using computational fluid dynamics. Journal of Building Engineering, 100, 111754. https://doi.org/https://doi.org/10.1016/j.jobe.2024.111754
Tabadkani, A., Aghasizadeh, S., Banihashemi, S., & Hajirasouli, A. (2022). Courtyard design impact on indoor thermal comfort and utility costs for residential households: Comparative analysis and deep-learning predictive model. FRONTIERS OF ARCHITECTURAL RESEARCH, 11(5), 963-980. https://doi.org/10.1016/j.foar.2022.02.006
Takemasa, Y., Togari, S., & Arai, Y. (1996). Application of an unsteady-state model for predicting vertical temperature distribution to an existing atrium (0001-2505).
Tang, H., Ding, J., & Lin, Z. (2020). On-site measurement of indoor environment quality in a Chinese healthcare facility with a semi-closed hospital street. Building and Environment, 173, 106637.
Walker, C., Tan, G., & Glicksman, L. (2011). Reduced-scale building model and numerical investigations to buoyancy-driven natural ventilation. Energy and Buildings, 43(9), 2404-2413.
Wang, L., Huang, Q., Zhang, Q., Xu, H., & Yuen, R. K. (2017a). Role of atrium geometry in building energy consumption: The case of a fully air-conditioned enclosed atrium in cold climates, China. Energy and Buildings, 151, 228-241.
Wang, L., Huang, Q., Zhang, Q., Xu, H., & Yuen, R. K. K. (2017b). Role of atrium geometry in building energy consumption: The case of a fully air-conditioned enclosed atrium in cold climates, China. Energy and Buildings, 151, 228-241. https://doi.org/https://doi.org/10.1016/j.enbuild.2017.06.064
Wu, P., Zhou, J., & Li, N. (2021). Influences of atrium geometry on the lighting and thermal environments in summer: CFD simulation based on-site measurements for validation. Building and Environment, 197, 107853.
Xu, C., Wang, Y., Hui, J., Wang, L., Yao, W., & Sun, L. (2023). Study on the Winter Thermal Environmental Characteristics of the Atrium Space in a Teaching Building in China's Cold Region. Journal of Building Engineering, 67, 105978.
Xue, Y., & Liu, W. (2022). A study on parametric design method for optimization of daylight in commercial building’s atrium in cold regions. Sustainability, 14(13), 7667.
Zhao, K., Weng, J., & Ge, J. (2020). On-site measured indoor thermal environment in large spaces of airports during winter. Building and Environment, 167, 106463.
Zhou, B., Huang, Y., Nie, J., Ding, L., Sun, C., & Chen, B. (2023). Modification and verification of the PMV model to improve thermal comfort prediction at low pressure. J. Therm. Biol., 117, 103722. https://doi.org/10.1016/j.jtherbio.2023.103722
Zhu, L., Wang, B., & Sun, Y. (2020). Multi-objective optimization for energy consumption, daylighting, and thermal comfort performance of rural tourism buildings in north China. Building and Environment, 176, 106841.