A study on the effect of Sic particle distribution on the creep behavior of variable-thickness plates composed of functionally graded materials (FGMs)
محورهای موضوعی : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیک
Majid Amiri
1
,
Ahmad Keshavarzi
2
1 - Faculty of Mechanics, Malek Ashtar University of Technology, Isfahan, Iran
2 - Assistant Professor of Mechanical Engineering,Faculty of Mechanical Engineering, Islamic Azad University, Khomeini Shahr, Isfahan, Iran.
کلید واژه: Creep, Silicon Carbide, FGM materials, Variable thickness,
چکیده مقاله :
This paper investigates the creep behavior of a variable-thickness rectangular plate reinforced with silicon carbide (SiC) particles dispersed within an aluminum (Al) matrix. The distribution of SiC particles varies along the plate's thickness, and the structure is subjected to constant mechanical loading and non-uniform thermal loading, modeled as a linear temperature gradient through the thickness. The Classical Plate Theory is employed to derive the governing equations incorporating creep deformation, considering that both mechanical and thermal properties vary as functions of the local SiC volume fraction. To analyze creep behavior, Mendelson’s successive approximation method combined with the Prandtl–Reuss constitutive equations is used. The resulting system of equations is solved using the Differential Quadrature Method (DQM). The study aims to evaluate different reinforcement distribution profiles to identify the optimal configuration in terms of failure criteria and long-term creep displacement. Specifically, the plate's creep response is examined for various SiC distributions with an average volume fraction of 25% over a 5-year period.
This paper investigates the creep behavior of a variable-thickness rectangular plate reinforced with silicon carbide (SiC) particles dispersed within an aluminum (Al) matrix. The distribution of SiC particles varies along the plate's thickness, and the structure is subjected to constant mechanical loading and non-uniform thermal loading, modeled as a linear temperature gradient through the thickness. The Classical Plate Theory is employed to derive the governing equations incorporating creep deformation, considering that both mechanical and thermal properties vary as functions of the local SiC volume fraction. To analyze creep behavior, Mendelson’s successive approximation method combined with the Prandtl–Reuss constitutive equations is used. The resulting system of equations is solved using the Differential Quadrature Method (DQM). The study aims to evaluate different reinforcement distribution profiles to identify the optimal configuration in terms of failure criteria and long-term creep displacement. Specifically, the plate's creep response is examined for various SiC distributions with an average volume fraction of 25% over a 5-year period.
[1] Loghman, A. and Wahab, M. A. (1996). Creep damage simulation of thick-walled tubes using the Θ projection concept. International Journal of Pressure Vessels and Piping, 67 (1) 105-111.
[2] Singh, S.B. and Ray, S. (2003). Creep analysis in an isotropic FGM rotating disk of Al–SiC composite, Journal of Materials Processing Technology, 143-144 616–622.
[3] Loghman, A. and Shokouhi, N. (2009). Creep damage evaluation of thickwalled spheres using a long-term creep constitutive model. Journal of Mechanical Science and Technology, 23, 2577- 2582.
[4] Loghman, A., Ghorbanpour Arani, A., Amir, S. and Vajedi, A. (2010). Magnetothermoelastic creep analysis of functionally graded cylinders. International Journal of Pressure Vessels and Piping, 87(7), 389-395.
[5] Moradi, M. and Loghman, A. (2018). Non-Axisymmetric TimeDependent Creep Analysis in a Thick-Walled Cylinder Due to the Thermo-mechanical loading. Journal of Solid Mechanics, 10(4), 845-863.
[6] Arefi, M., Nasr, M. and Loghman, A. (2018). Creep analysis of the FG cylinders: Time-dependent non-axisymmetric behavior. Steel and Composite Structures, 28(3), 331-347.
[7] Loghman, A., Koohi Faegh, R. and Arefi, M. (2018). Two dimensional time-dependent creep analysis of a thick-walled FG cylinder based on first order shear deformation theory. Steel and Composite Structures, 26(5), 533-547.
[8] Zharfi, H., Ekhteraei Toussi, H. (2017). Numerical creep analysis of FGM rotating disc with GDQ method. Journal of theoretical and applied mechanics, 55(1), 331-341.
[9] Mirzaei, M.M.H, Arefi, M and Loghman, A. (2019). Time-dependent creep analysis of a functionally graded simple blade using first-order shear deformation theory. Australian Journal of Mechanical Engineering, 448-4846, 2204-2253.
[10] Vladimir A., Yazyev, B.M. and Chepurnenko A. (2014). On the Bending of a Thin Plate at Nonlinear Creep. Advanced Materials Research, 900,707-710.
[11] Majid Amiri, Abbas Loghman, Mohammad Arefi, (2023). Thermoelastic analysis of rectangular plates with variable thickness made of FGM based on TSDT using DQ method. Geomechanics & engineering. 29 (6), 667-681.
[12] Majid Amiri, Abbas Loghman, Mohammad Arefi, (2023). Creep analysis of plates made of functionally graded Al-SiC material subjected to thermomechanical loading. Advances in concrete construction. 15 (2), 115-126.
[13] Golmakaniyoon, S. and Akhlaghi, F. (2016). Time-dependent creep behavior of Al–SiC functionally graded beams under in-plane thermal loading. Comput. Mate. Sci., 121, 182–190.
