Bio-Hydrometallurgy of Electronic Waste: Extraction of Precious Metals by Cyanogenic Microorganisms and Influencing Factors
محورهای موضوعی : Journal of Environmental Friendly MaterialsH Ahmadiani 1 , A Rabieifar 2 , H Sabet 3
1 - Faculty of Materials Science and Engineering, K. N. Toosi University of Technology, Tehran, Iran
2 - Department of Materials Engineering, ST.C., Islamic Azad University, Tehran, Iran
3 - Department of Materials Engineering, Ka.C., Islamic Azad University, Karaj, Iran
کلید واژه: E-Waste Recycling, Precious Metal Extraction, Bio-Hydrometallurgy, Bioleaching,
چکیده مقاله :
Extracting of precious metals from electronic waste (e-waste), such as waste printed circuit boards (WPCBs), contributes to environmental sustainability while offering high recovery rates and significant profitability. If improperly disposed of, E-waste contains heavy and toxic metals that can leach into groundwater and rainwater, eventually entering the human food chain. On the other hand, e-waste is also a rich source of precious metals, particularly gold (Au). One of the most effective methods for recovery from e-waste is bio-hydrometallurgy, which utilizes microorganisms to enhance recovery efficiency, ensure environmental compatibility, and reduce energy consumption. The indirect bioleaching method is employed in the case of precious metal extraction from e-waste. This process requires bacteria or fungi capable of producing cyanogenic compounds, including bacterial species such as Chromo-bacteriu-mviolaceum, Bacillus megaterium, Pseudomonas fluorescens, and Pseudomonas plecoglossicida, as well as fungal species such as Marasmiusoreades, Clitocybe sp., and Polysporus sp. Several factors influence bioleaching efficiency by cyanogenic microorganisms, including pulp density, pH, waste particle size, temperature, dissolved oxygen (DO), cyanide concentration, and production rate. Among these, pulp density, pH, DO, and cyanide content are more critical than waste particle size and temperature
Extracting of precious metals from electronic waste (e-waste), such as waste printed circuit boards (WPCBs), contributes to environmental sustainability while offering high recovery rates and significant profitability. If improperly disposed of, E-waste contains heavy and toxic metals that can leach into groundwater and rainwater, eventually entering the human food chain. On the other hand, e-waste is also a rich source of precious metals, particularly gold (Au). One of the most effective methods for recovery from e-waste is bio-hydrometallurgy, which utilizes microorganisms to enhance recovery efficiency, ensure environmental compatibility, and reduce energy consumption. The indirect bioleaching method is employed in the case of precious metal extraction from e-waste. This process requires bacteria or fungi capable of producing cyanogenic compounds, including bacterial species such as Chromo-bacteriu-mviolaceum, Bacillus megaterium, Pseudomonas fluorescens, and Pseudomonas plecoglossicida, as well as fungal species such as Marasmiusoreades, Clitocybe sp., and Polysporus sp. Several factors influence bioleaching efficiency by cyanogenic microorganisms, including pulp density, pH, waste particle size, temperature, dissolved oxygen (DO), cyanide concentration, and production rate. Among these, pulp density, pH, DO, and cyanide content are more critical than waste particle size and temperature
[1] Das S, Natarajan G, Ting YP. Bio-extraction of precious metals from urban solid waste. AIP Conf Proc. 2017;1805(1):020004.
[2] Babu BR, Parande AK, Basha CA. Electrical and electronic waste: A global environmental problem. Waste. Man. Res. 2007;25(4):307–18.
[3] Hocheng H, Chakankar M, Jadhav UU. Bio hydrometallurgical Recycling of Metals from Industrial Wastes. Boca. Raton: CRC Press; 2017.
[4] Cui J, Zhang L. Metallurgical recovery of metals from electronic waste: a review. J. Hazard. Mater. 2008;158(2–3):228–56.
[5] Hsu E, Barmak K, West AC, Park AHA. Advancements in the treatment and processing of electronic waste with sustainability: a review of metal extraction and recovery technologies. Green. Chem. 2019;21(5):919–36.
[6] Olson GJ, Brierley JA, Brierley CL. Bioleaching review part B. Appl. Microbiol. Biotechnol. 2003;63(3):249–57.
[7] Sum EYL. The recovery of metals from electronic scrap. JOM. 1991;43(4):53–61.
[8] Abhilash, Pandey BD, Natarajan KA. Microbiology for Minerals, Metals, Materials and the Environment. Boca. Raton: CRC Press; 2015.
[9] Sodhi MS, Reimer B. Models for recycling electronics end-of-life products. OR Spektrum. 2001;23(1):97–115.
[10] Willner J, Fornalczyk A. Extraction of metals from electronic waste by bacterial leaching. Env. Prot. Eng. 2013;39(1):197–208.
[11] Tay SB. Enhancing gold recovery from electronic waste via lixiviant metabolic engineering in Chromo-bacter-iumviolaceum. Sci. Rep. 2013;3(1):1–7.
[12] Liu R, Li J, Ge Z. Review on Chromo-bacteri-umviolaceum for Gold Bioleaching from E-waste. Procedia. Env. Sci. 2016;31:947–53.
[13] Yaashikaa PR, Priyanka B, Senthil Kumar P, Karishma S, Jeevanantham S, Indraganti S. A review on recent advancements in recovery of valuable and toxic metals from e-waste using bioleaching approach. Chemosphere. 2022;287:132230.
[14] Awasthi AK. Modelling the correlations of e-waste quantity with economic increase. Sci. Total Env. 2018;613–614:46–53.
[15] Brierley CL, Brierley JA. Progress in bioleaching: part B: applications of microbial processes by the minerals industries. App. Micr.Biotechl. 2013;97(17):7543–52.
[16] Cerrillo-Gonzalez MM, Villen-Guzman M, Vereda-Alonso C, Rodriguez-Maroto JM, Paz-Garcia JM. Acid leaching of LiCoO2 enhanced by reducing agent. Model formulation and validation. Chemosphere. 2022;287:132020.
[17] Weis D. Hf isotope compositions of U.S. Geological Survey reference materials. Geochem .Geophys. Geosyst. 2007;8(6).
[18] Wang J, Bai J, Xu J, Liang B. Bioleaching of metals from printed wire boards by Acid-ithiobacillus ferro-oxidans and Acid-ithiobacillus thiooxidans and their mixture. J. Hazard. Mater. 2009;172(2–3):1100–05.
[19] Ongondo FO, Williams ID, Cherrett TJ. How are WEEE doing? A global review of the management of electrical and electronic wastes. Waste. Man. 2011;31(4):714–30.
[20] Natarajan G, Ting YP. Pretreatment of e-waste and mutation of alkali-tolerant cyanogenic bacteria promote gold bio-recovery. Bioresour. Tech. 2014;152:80–5.
[21] Wang Q. Waste-Printed Circuit Board Recycling: Focusing on Preparing Polymer Composites and Geopolymers. ACS Omega. 2020;5(29):17850–56.
[22] Lu Y, Xu Z. Precious metals recovery from waste printed circuit boards: A review for current status and perspective. Resour. Conserv. Recycl. 2016;113:28–39.
[23] Arya S, Kumar S. Bioleaching: urban mining option to curb the menace of E-waste challenge. Bioeng. 2020;11(1):640–60.
[24] Dave SR, Sodha AB, Tipre DR. Microbial technology for metal recovery from e-waste printed circuit boards. J. Bact. Mycol. 2018;6(4).
[25] Estrada-Ruiz RH, Flores-Campos R, Gámez-Altamirano HA, Velarde-Sánchez EJ. Separation of the metallic and non-metallic fraction from printed circuit boards employing green technology. J. Hazard. Mater. 2016;311:91–9.
[26] Ilyas S, Ruan C, Bhatti HN, Ghauri MA, Anwar MA. Column bioleaching of metals from electronic scrap. Hydrometal. 2010;101(3–4):135–40.
[27] Srivastava RR. Biotechnological recycling of critical metals from waste printed circuit boards. J. Chem .Technol .Biotechnol. 2020;95(11):2796–810.
[28] Gadd GM. Metals, minerals and microbes: Geomicrobiology and bioremediation. Microbio. (N Y). 2010;156(3):609–43.
[29] Xu TJ, Ting YP. Fungal bioleaching of incineration fly ash: Metal extraction and modeling growth kinetics. Enzyme. Microb. Technol. 2009;44(5):323–28.
[30] Yang J, Wang Q, Wang Q, Wu T. Heavy metals extraction from municipal solid waste incineration fly ash using adapted metal tolerant Aspergillus niger. Bioresour. Tech. 2009;100(1):254–60.
[31] Ilyas S, Anwar M, Niazi S, Ghauri MA. Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria. Hydrometal. 2007;88:180–88.
[32] Krebs W, Brombacher C, Bosshard PP, Bachofen R, Brandl H. Microbial recovery of metals from solids. FEMS. Microbiol. Rev. 1997;20(3–4):605–17.
[33] Rasoulnia P, Barthen R, Lakaniemi AM. A critical review of bioleaching of rare earth elements: The mechanisms and effect of process parameters. Crit. Rev. Env. Sci. Technol. 2020;51(4):378–427.
[34] Qu Y, Lian B. Bioleaching of rare earth and radioactive elements from red mud using Penicillium tricolor RM-10. Bioresour Tech. 2013;136:16–23.
[35] Minimol M, Vidya Shetty K, Saidutta MB. Bioprocess Engineering Process for Bioremediation: Process Engineering in Bioleaching of Metals from Electronic Waste. Waste Manag. 2020.
[36] Shah MB, Tipre DR, Purohit MS, Dave SR. Development of two-step process for enhanced bio-recovery of Cu-Zn-Ni from computer printed circuit boards. J .Biosci .Bioeng. 2015;120(2):167–73.
[37] Mishra D, Rhee YH. Current research trends of microbiological leaching for metal recovery from industrial wastes. Daejeon: FORMATEX; 2010.
[38] Abhilash, Pandey BD. Bioreactor leaching of uranium from a low grade Indian silicate ore. Biochem .Eng .J. 2013;71:111–17.
[39] Kim MJ, Seo JY, Choi YS, Kim GH. Bioleaching of spent Zn-Mn or Ni-Cd batteries by Aspergillus species. Waste .Manag. 2016;51:168–73.
[40] Baniasadi M, Vakilchap F, Bahaloo-Horeh N, Mousavi SM, Farnaud S. Advances in bioleaching as a sustainable method for metal recovery from e-waste: A review. J .Ind .Eng .Chem. 2019;76:75–90.
[41] Watling HR, Perrot FA, Shiers DW. Comparison of selected characteristics of Sulfobacillus species and review of their occurrence in acidic and bioleaching environments. Hydrometal. 2008;93(1–2):57–65.
[42] Plumb JJ, Haddad CM, Gibson JAE, Franzmann PD. Acidi-anussulfidivorans sp. nov., an extremely acidophilic, thermophilic archaeon isolated from a solfatara on Lihir Island, Papua New Guinea, and emendation of the genus description. Int. J. Sys. Evol. Microbiol. 2007;57(7):1418–23.
[43] Watling HR. The bioleaching of sulphide minerals with emphasis on copper sulphides — A review. Hydrometal. 2006;84(1–2):81–108.
[44] Faramarzi MA, Stagars M, Pensini E, Krebs W, Brandl H. Metal solubilization from metal-containing solid materials by cyanogenic Chrom-obacterium violaceum. J. Biotechnol. 2004;113(1–3):321–26.
[45] Yang T, Xu Z, Wen J, Yang L. Factors influencing bioleaching copper from waste printed circuit boards by Acid-ithiobacillus ferro-oxidans. Hydrometal. 2009;97(1–2):29–32.
[46] Guo Z, Zhang L, Cheng Y, Xiao X, Pan F, Jiang K. Effects of pH, pulp density and particle size on solubilization of metals from a Pb/Zn smelting slag using indigenous moderate thermophilic bacteria. Hydrometal. 2010;104(1):25–31.
[47] Li J, Liang C, Ma C. Bioleaching of gold from waste printed circuit boards by Chromobacterium violaceum. J. Mat. Cycles. Waste. Manag. 2015;17(3):529–39.
[48] Arshadi M, Mousavi SM. Simultaneous recovery of Ni and Cu from computer-printed circuit boards using bioleaching: Statistical evaluation and optimization. Bioresour. Tech. 2014;174:233–42.
[49] Li J, Wen J, Guo Y, An N, Liang C, Ge Z. Bioleaching of gold from waste printed circuit boards by alkali-tolerant Pseudomonas fluorescens. Hydrometal. 2020;194:105260.
[50] Chen SY, Lin PL. Optimization of operating parameters for the metal bioleaching process of contaminated soil. Sep. Purif. Tech. 2010;71(2):178–85.
[51] Valdés J. Acid-ithiobacillus ferro-oxidans metabolism: From genome sequence to industrial applications. BMC Genomics. 2008;9(1):1–24.
[52] Saravanan A, Kumar PS, Yaashikaa PR, Karishma S, Jeevanantham S, Swetha S. Mixed biosorbent of agro waste and bacterial biomass for the separation of Pb(II) ions from water system. Chemosphere. 2021;277:130236.
[53] May O, Jin S, Ghali E, Deschénes G. Effects of sulfide and lead nitrate addition to a gold cyanidation circuit using potentiodynamic measurements. J. Appl. Electrochem. 2005;35(2):131–37.
[54] Donnarumma G, Buommino E, Fusco A, Paoletti I, Auricchio L, Tufano MA. Effect of Temperature on the Shift of Pseudomonas fluorescens from an Environmental Microorganism to a Potential Human Pathogen. Int. J. Immunopathol. Pharmacol. 2010;23(1):227–34.
[55] Kawato Y. Complete Genome Sequence Analysis of Two Pseudomonas plecoglossicida Phages, Potential Therapeutic Agents. Appl. Env. Microbiol. 2015;81(3):874–81.
[56] Kita Y, Nishikawa H, Ike M, Takemoto T. Enhancement of Au Dissolution by Microorganisms Using an Accelerating Cathode Reaction. Meta. Mater. Trans B. 2008;40(1):39–44.
[57] Beolchini F, Fonti V, Dell’Anno A, Rocchetti L, Vegliò F. Assessment of biotechnological strategies for the valorization of metal bearing wastes. Waste. Manag. 2012;32(5):949–56.
[58] Chi TD, Lee JC, Pandey BD, Yoo K, Jeong J. Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium. Miner. Eng. 2011;24(11):1219–22.
[59] Arshadi M, Yaghmaei S, Mousavi SM. Study of plastics elimination in bioleaching of electronic waste using Acid-ithiobacillus ferro-oxidans. Int. J. Envi. Sci. Tech. 2019;16(11):7113–26.
