Study of the Effect of Biochar Addition to PLA on the Mechanical and Thermal Properties of 3D-Printed Samples
محورهای موضوعی : Manufacturing process monitoring and controlKeyvan Hashemi 1 , Hamzeh Shahrajabian 2 , Masoud Farahnakian 3
1 - Department of Mechanical Engineering, Na.C., Islamic Azad University, Najafabad, Iran
2 - Department of Mechanical Engineering, Na.C., Islamic Azad University, Najafabad, Iran
3 - Department of Mechanical Engineering, Na.C., Islamic Azad University, Najafabad, Iran
کلید واژه: Polylactic Acid, Biochar, Tensile Test, Thermal Properties ,
چکیده مقاله :
Biomass is a renewable material derived from plants and their residues, including straw husks, manure, and other organic waste. These materials contain excess carbon, such as biochar, which can be utilized in various industries to enhance efficiency, reduce production costs, and support environmental sustainability and recycling. In this study, the effects of adding biochar particles at weight ratios of 0%, 10%, 25%, and 40% to polylactic acid (PLA) were investigated in terms of tensile strength and differential scanning calorimetry (DSC) thermal analysis. X-ray diffraction (XRD) was used to identify the crystalline structure of the biochar. The results showed that increasing the biochar content significantly reduced the tensile strength of PLA. The tensile strength dropped from 56 MPa for pure PLA to 41, 14.3, and 8.5 MPa for 10%, 25%, and 40% biochar, respectively. Similarly, the tensile modulus decreased from 5.7 GPa for pure PLA to 5.1 GPa at 10%, 3.8 GPa at 25%, and 2 GPa at 40% biochar. Thermal analysis indicated that adding biochar to PLA led to a reduction in both the glass transition temperature (Tg) and melting temperature (Tm), while the degree of crystallinity increased.
Biomass is a renewable material derived from plants and their residues, including straw husks, manure, and other organic waste. These materials contain excess carbon, such as biochar, which can be utilized in various industries to enhance efficiency, reduce production costs, and support environmental sustainability and recycling. In this study, the effects of adding biochar particles at weight ratios of 0%, 10%, 25%, and 40% to polylactic acid (PLA) were investigated in terms of tensile strength and differential scanning calorimetry (DSC) thermal analysis. X-ray diffraction (XRD) was used to identify the crystalline structure of the biochar. The results showed that increasing the biochar content significantly reduced the tensile strength of PLA. The tensile strength dropped from 56 MPa for pure PLA to 41, 14.3, and 8.5 MPa for 10%, 25%, and 40% biochar, respectively. Similarly, the tensile modulus decreased from 5.7 GPa for pure PLA to 5.1 GPa at 10%, 3.8 GPa at 25%, and 2 GPa at 40% biochar. Thermal analysis indicated that adding biochar to PLA led to a reduction in both the glass transition temperature (Tg) and melting temperature (Tm), while the degree of crystallinity increased.
[1] Sharifiana, M. and Shahrajabian, H. 2022. The study of mechanical, thermal, and antibacterial properties of pla/graphene oxide/tio2 hybrid nanocomposites. Iranian Journal of Chemistry and Chemical Engineering. 41(3):799-807. doi:1021-9986/2022/3/799-763.
[2] Sheikh, K. and Shahrajabian, H. 2021. Experimental study on mechanical, thermal and antibacterial properties of hybrid nanocomposites of PLA/CNF/Ag. Int J Eng. 34(2):500-7. doi: 10.5829/ije.2021.34.02b.23.
[3] Farah, S., Anderson, DG. and Langer, R. 2016. Physical and mechanical properties of PLA, and their functions in widespread applications—A comprehensive review. Advanced drug delivery reviews. 107:367-92. doi:10.1016/j.addr.2016.06.012.
[4] Lim, L-T., Auras, R. and Rubino, M. 2008. Processing technologies for poly (lactic acid). Progress in polymer science. 33(8):820-52. doi:10.1016/j.progpolymsci.2008.05.004.
[5] Murariu, M. and Dubois, P. 2016. PLA composites: From production to properties. Advanced drug delivery reviews. 107:17-46. doi:10.1016/j.addr.2016.04.003.
[6] Lehmann, J. and Joseph, S. 2015. Biochar for environmental management. Science, Technology and Implementation (2nd ed.). Routledge. doi:10.4324/9780203762264.
[7] Zhang, Q., Khan, MU., Lin, X., Yi, W. and Lei, H. 2020. Green-composites produced from waste residue in pulp and paper industry: A sustainable way to manage industrial wastes. Journal of Cleaner Production. 262:121251. doi:10.1016/j.jclepro.2020.121251.
[8] Das, C., Tamrakar, S., Kiziltas, A. and Xie, X. 2021. Incorporation of biochar to improve mechanical, thermal and electrical properties of polymer composites. Polymers. 13(16):2663. doi:10.3390/polym13162663.
[9] Elnour, AY., Alghyamah, AA., Shaikh, HM., Poulose, AM., Al-Zahrani, SM., Anis, A. and et al. 2019. Effect of pyrolysis temperature on biochar microstructural evolution, physicochemical characteristics, and its influence on biochar/polypropylene composites. Applied sciences. 9(6):1149. doi:10.3390/app9061149.
[10] She, D., Dong, J., Zhang, J., Liu, L., Sun, Q., Geng, Z. and Peng, P. 2019. Development of black and biodegradable biochar/gutta percha composite films with high stretchability and barrier properties. Composites Science and Technology. 175:1-5. doi:10.1016/j.compscitech.2019.03.007.
[11] Ngo, TD., Kashani, A., Imbalzano, G., Nguyen, KT. and Hui, D. 2018. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering. 143:172-96. doi:10.1016/j.compositesb.2018.02.012.
[12] Anerao, P., Kulkarni, A., Munde, Y., Shinde, A. and Das, O. 2023. Biochar reinforced PLA composite for fused deposition modelling (FDM): a parametric study on mechanical performance. Composites Part C: Open Access. 12:100406. doi:10.1016/j.jcomc.2023.100406.
[13] Liu, Y., Zhao, X., Li, J., Ma, D. and Han, R. 2012. Characterization of bio-char from pyrolysis of wheat straw and its evaluation on methylene blue adsorption. Desalination and Water Treatment. 46(1-3):115-23. doi:10.1080/19443994.2012.677408.
[14] Giannakopoulos, S., Vakros, J., Frontistis, Z., Manariotis, ID., Venieri, D., Poulopoulos, SG. and et al. 2023. Biochar from lemon stalks: A highly active and selective carbocatalyst for the oxidation of sulfamethoxazole with persulfate. Catalysts. 13(2):233. doi:10.3390/catal13020233.
[15] Muniyadi, M., Munusamy, Y. and Xin, HH. 2024. Palm oil mill effluent-derived biochar-filled high-density polyethylene composites: processability and physico-mechanical properties evaluation. Journal of Material Cycles and Waste Management. 26(1):252-65. doi:10.1007/s10163-023-01829-y.
[16] Huang, C-C., Chang, C-W., Jahan, K., Wu, T-M. and Shih, Y-F. 2023. Effects of the Grapevine Biochar on the Properties of PLA Composites. Materials. 16(2):816. doi:10.3390/ma16020816.
[17] Khui, PN., Rahman, R., Ahmed, AS., Kuok, KK., Bakri, M., Tazeddinova, D. and et al. 2021. Morphological and Thermal Properties of Composites Prepared with Poly (lactic acid), Poly (ethylene-alt-maleic anhydride), and Biochar from Microwave-pyrolyzed Jatropha Seeds. BioResources. 16(2):3171-85.
