Casting Process Simulation of Engine Tappet and Checking the Various Features of the Casting Process
محورهای موضوعی : Journal of Environmental Friendly Materials
Zahra Arzaqi
1
,
Fateme badretalei
2
,
sana chizari
3
,
Omid Ashkani
4
,
shahram mahboubizadeh
5
,
Mohammad Reza Tavighi
6
1 - Interdisciplinary center for advanced materials simulation, Ruhr University Bochum, Universitasstr.150, 4401, Bochum, Germany,
2 - Department of mechanical engineering, Faculty of engineering, North Tehran branch, Azad University, Tehran, Iran,
3 - Department of Mechanical Engineering, Faculty of Engineering, North Tehran branch, Azad University, Tehran, Iran,
4 - Faculty of Technology and Engineering, Islamic Azad University, Science and Research Unit, Tehran, Iran
5 - Department of Materials science and Engineering, Faculty of Engineering, Science and Research branch, Islamic Azad University, Tehran 1477893855, Iran
6 - PhD Candidate, Faculty of Materials Engineering Karaj Branch, Islamic Azad University Karaj, Iran.
کلید واژه: Software Simulation, Cast Iron, Casting, Engine Tappet,
چکیده مقاله :
Simulation is one of the methods of interest in various industries, including automobile manufacturing, to reduce the costs, material wastage, and increase the productivity. Simulation has an effective role in reducing process costs and as a result can lead to an increase in productivity in part manufacturing processes. Also, the simulation reduces the environmental pollution caused by the prototypes. In the meantime, it is important to pay attention to the simulation of casting processes, and in the current research, a car engine tappet part is made using analysis simulation and a real sample. The results show that the simulation has played an effective role in identifying possible defects and making a healthy part, and also in the real sample, the presence of carbide and ledeburite structures has been a factor in increasing the hardness of the part. Finally, the increase in hardness may increase the wear resistance of this part, which plays an effective role in the performance of the car engine.
Simulation is one of the methods of interest in various industries, including automobile manufacturing, to reduce the costs, material wastage, and increase the productivity. Simulation has an effective role in reducing process costs and as a result can lead to an increase in productivity in part manufacturing processes. Also, the simulation reduces the environmental pollution caused by the prototypes. In the meantime, it is important to pay attention to the simulation of casting processes, and in the current research, a car engine tappet part is made using analysis simulation and a real sample. The results show that the simulation has played an effective role in identifying possible defects and making a healthy part, and also in the real sample, the presence of carbide and ledeburite structures has been a factor in increasing the hardness of the part. Finally, the increase in hardness may increase the wear resistance of this part, which plays an effective role in the performance of the car engine.
[1] Ashkani O, Tavighi MR, Karamimoghadam M, Moradi M, Bodaghi M, Rezayat M, Influence of aluminum and copper on mechanical properties of biocompatible Ti-Mo Alloys: A Simulation-Based Investigation. Micromachines. 2023; 14(5):1081.
[2] Malik I, Sani AA, Medi A, Study on using casting simulation software for design and analysis of riser shapes in a solidifying casting component. InJournal of Physics: Conference Series 2020; 1: 012036.
[3] Lei C, Yang Y, Yang G, Huang Y, Magma software simulation assisted optimization of the casting system of turbocharger castings. Procedia Manufacturing. 2019; 37:59-65.
[4] Meyer J, Engine modeling of an internal combustion engine with twin independent cam phasing, Doctoral dissertation, Ohio State University.
[5] Jelenschi, L, Scutaru, M L, Marin, M, Cofaru C, Modelling the Valvetrain of the Car Engine to Study the Effects of Valve Rotation. Applied Sci. 2022; 12(7):3393.
[6] Wenjiang W, Bin G, Mingjun Z, Zhanfeng G, Yunfeng T, Dynamic characteristics analysis of engine valve tappet. UPB Scientific Bulletin, Series D: Mech. Eng. 2018; 80:115-126.
[7] Arshad W et al, Technique developed to study camshaft and tappet wear on real production Engine. Industrial Lubrication and Tribology, 2017; 69(2):174-181.
[8] Sviželová J, Socha L, Gryc K, Chmiel M, Brathová M, Prediction of defects of ductile iron casting by numerical simulation. Metal 2021: 166-171.
[9] Kubo J, Multi-scale simulation of ductile iron casting. In IOP Conference Series: Materials Science and Engineering 2015; 84(1):012044.
[10] Mihai D, Cimpoeşu N, Manole V, Simulation of solidification process of cast-iron and aluminum materials. In IOP Conference Series: Materials Science and Engineering 2019; 572(1):012020.
[11] Bai H, Zhong L, Kang L, Liu J, Zhuang W, Lv Z, Xu Y, A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy. J. Alloys Compd. 2021; 882:160645.
