Structural and Morphological Characterization of Cu-Doped SnO2Thin Films
محورهای موضوعی : Journal of Environmental Friendly Materials
shima khosravani
1
,
Fatemeh Hajakbari
2
,
Alireza Hojabri
3
1 - Department of Physics, Karaj Branch, Islamic Azad University, Karaj, Iran
2 - Department of Physics, Karaj Branch, Islamic Azad University, Karaj, Iran
3 - Department of Physics, Karaj Branch, Islamic Azad University
کلید واژه: Cu-Doped SnO2, Glass, FTO, Thin Film, RF Sputtering, Nanocrystalline,
چکیده مقاله :
This study investigated the structural and morphological properties of Cu-doped SnO2 films grown on glass and FTO (fluorine tin oxide) substrates by RF magnetron sputtering and annealed at a temperature of 600 ºC. The techniques of X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray spectroscopy (EDX) were employed to characterize the structural and morphological properties of the films. The XRD results verified the formation of a polycrystalline SnO2 in a tetragonal structure for all samples. The sample deposited on the FTO exhibited a larger crystallite size compared to the sample deposited on a glass substrate. AFM and FESEM images exhibit that the type of the substrates influences the morphology, roughness, and grain sizes of the films. The EDX analysis confirmed the presence of Sn, O, and Cu elements in the films. The results show that the choice of substrate can significantly impact the structural and morphological characteristics of deposited films, influencing their potential applications in various fields such as solar cells and gas sensors
This study investigated the structural and morphological properties of Cu-doped SnO2 films grown on glass and FTO (fluorine tin oxide) substrates by RF magnetron sputtering and annealed at a temperature of 600 ºC. The techniques of X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray spectroscopy (EDX) were employed to characterize the structural and morphological properties of the films. The XRD results verified the formation of a polycrystalline SnO2 in a tetragonal structure for all samples. The sample deposited on the FTO exhibited a larger crystallite size compared to the sample deposited on a glass substrate. AFM and FESEM images exhibit that the type of the substrates influences the morphology, roughness, and grain sizes of the films. The EDX analysis confirmed the presence of Sn, O, and Cu elements in the films. The results show that the choice of substrate can significantly impact the structural and morphological characteristics of deposited films, influencing their potential applications in various fields such as solar cells and gas sensors
[1] Feyzi E, Hajakbari F, Hojabri A, Effect of Annealing Temperatures on Structural and Morphological Properties of Copper doped Nickel Oxide Thin Films Prepared by RF Magnetron Sputtering. JEFM. 2021;5: 17-20.
[2] Ghasemi B, Hajakbari F, Hojabri A, Structural and optical properties of nanocrystalline MoO3 thin films grown by thermal oxidation of sputtered molybdenum films. Inorg. Nano-Met.Chem. 2020; 50:414-422.
[3] Hajakbari F, Rashvand S, Hojabri A, Efect of plasma oxidation parameters on physical properties of nanocrystalline nickel oxide thin flms grown by two step method: DC sputtering and plasma oxidation. J. Theor. Appl. Phys. 2019; 13: 365–373.
[4] Hojabri A, Adavi M, Hajakbari F, Synthesis of Nickel-Doped TiO2 Thin Films and Their Structural and Optical Properties at Different Annealing Temperatures. ACTA PHYS POL A. 2017; 131:386.
[5] Nouri Z, Hojabri A, Hajakbari F, Preparation and Characterization of Molybdenum Trioxide Thin Films Grown by Two-Step Method: DC Sputtering and Plasma Oxidation. JEFM. 2020; 4: 33-37.
[6] Feyzi E, Hajakbari F, Hojabri A, Influence of annealing temperature on the structural, morphological, and optical properties of nanocrystalline NiO and Cu-doped NiO thin films and its application in acetone gas sensing. J Mater Sci: Mater Electron. 2023; 34: 971-1534.
[7] El Radaf I.M, Hameed Talaat A, Dahy T.M, El komy G.M, Synthesis, structural, linear and nonlinear optical properties of chromium doped SnO2 thin films.Ceram.Int. 2019;45:3072-3080.
[8] Khosravani Sh, Hajakbari F, Hojabri A, Preparation, characterization and gas sensor performance of nanocrystalline nickel-doped SnO2 films. J Mater Sci: Mater Electron. 2023; 34: 1515-1534.
[9] El Sayed A.M, Taha S, Shaban M, Said G, Tuning the structural, electrical and optical properties of tin oxide thin films via cobalt doping and annealing. Superlattices Microstruct. 2016; 95: 1-13.
[10] Pramitha A, Sangamitha V, Mishra V, Raviprakash Y, Tailoring the optoelectronic properties of spray pyrolyzed SnO2 thin films through cerium doping. Opt. Mater. 2024; 149: 114969.
[11] Nagar R, Kamathe V, Efficient Room Temperature Ethanol Vapor Sensing by Unique Fractal Features of Tin Oxide. Ig Min Res. 2024; 2(2): 97-101.
[12] Asaithambi S, Sakthivel P, Karuppaiah M, Sankar G.U, Balamurugan K, Yuvakkumar R. et al., Investigation of electrochemical properties of various transition metals doped SnO2 spherical nanostructures for supercapacitor applications. J. Energy Stor. 2020; 31: 101530.
[13] Ko1 Y, Rim Kim Y, Jang H, Lee Ch, Gu Kang M, Jun Y, Electro-deposition of SnO2 on FTO and its Application in Planar Heterojunction Perovskite Solar Cells as an Electron Transport Layer. Nanoscale Res. Lett. 2017; 12: 498.
[14] Vengatesh P, Shyju T.S, Effect of substrate temperature on reactive RF magnetron sputtered SnO2 thin films for photovoltaic applications. Mater. Today: Proc. 2021; 47: 1035–1039.
[15] Gudmundsson JT, Physics and technology of magnetron sputtering discharges. Plasma Sources Sci. Technol. 2020; 29: 113001 (53pp).
[16] Abd El-Aal M, Seto T, Surface-enhanced Raman scattering and catalytic activity studies over nanostructured Au–Pd alloy films prepared by DC magnetron sputtering. Res. Chem. Intermed. 2020; 46(7): 3741–3756.
[17] Boulegane A, Guittoum A, Laggoun A, Boudissa M, Hemmous M, Structural, Morphological, and Magnetic Properties of Electrodeposited CoNi Thin Films on the FTO Substrate. J. Supercond. Nov. Magn. 2022; 35: 2583-2593.
[18] Baka O, Bacha O, Khelladi M.R, Azizi A, Effect of annealing temperature on the properties of electrodeposited Cu2O on FTO glass substrate, Bull. Mater. Sci. 2023; 46: 84.
