Durability of Ambient Temperature Cured Geopolymer Concrete Containing Waste Tile Powder and Metakaolin

محورهای موضوعی : Composite materials

Sayed Fazlollah Hashemi ¹ , Leyla Adelzade saadabadi ² , Seyed Esmaeil Mohamamdyan-Yasouj ³

1 - Ph.D. Student, Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran.
2 - Assistant Professor, Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran.
3 - Assistant Professor, Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

تاریخ دریافت : 1403/07/07 تاریخ پذیرش : 1403/12/28 تاریخ انتشار : 1402/07/01

کلید واژه: Waste tile powder, Metakaolin, Durability, Mechanical properties, geopolymer concrete,

چکیده مقاله :

The main objective of this study is to evaluate and compare the mechanical and durability properties of geopolymer concretes that incorporate waste tile powder as a replacement for metakaolin at varying percentages ranging from 0% to 100%. The mixtures were divided into five groups, each with three different levels of sodium silicate to sodium hydroxide ratios of 1, 1.25, and 1.5. Mechanical properties, such as compressive strength, splitting tensile strength, and ultrasonic pulse velocity were considered to study the impact of waste tile powder substitution. Additionally, durability of the mixtures was examined by measuring water absorption, electrical resistance, and accelerated chloride ions migration coefficient.  Mineralogy of the geopolymer concrete was analyzed by XRD, and the microstructure was examined using SEM. Results indicate that incorporating 25% waste tile powder as the replacement for metakaolin led to a noteworthy increase in the compressive strength, splitting tensile strength, and ultrasonic pulse velocity of the geopolymer concretes. In addition, the SEM micrographs results indicated that geopolymer concrete with 25% waste tile powder and 75% metakaolin had smaller micro-cracks in the geopolymer matrix. However, when the proportion of waste tile powder exceeded 50%, mechanical strength of the geopolymer concretes declined.

چکیده انگلیسی:

The main objective of this study is to evaluate and compare the mechanical and durability properties of geopolymer concretes that incorporate waste tile powder as a replacement for metakaolin at varying percentages ranging from 0% to 100%. The mixtures were divided into five groups, each with three different levels of sodium silicate to sodium hydroxide ratios of 1, 1.25, and 1.5. Mechanical properties, such as compressive strength, splitting tensile strength, and ultrasonic pulse velocity were considered to study the impact of waste tile powder substitution. Additionally, durability of the mixtures was examined by measuring water absorption, electrical resistance, and accelerated chloride ions migration coefficient.  Mineralogy of the geopolymer concrete was analyzed by XRD, and the microstructure was examined using SEM. Results indicate that incorporating 25% waste tile powder as the replacement for metakaolin led to a noteworthy increase in the compressive strength, splitting tensile strength, and ultrasonic pulse velocity of the geopolymer concretes. In addition, the SEM micrographs results indicated that geopolymer concrete with 25% waste tile powder and 75% metakaolin had smaller micro-cracks in the geopolymer matrix. However, when the proportion of waste tile powder exceeded 50%, mechanical strength of the geopolymer concretes declined.

منابع و مأخذ:

[1] Y. H. M. Amran, R. Alyousef, H. Alabduljabbar, and M. El-Zeadani, “Clean production and properties of geopolymer concrete; A review,” Journal of Cleaner Production, vol. 251, p. 119679, 2020.
[2] A. Hassan, M. Arif, and M. Shariq, “Use of geopolymer concrete for a cleaner and sustainable environment – A review of mechanical properties and microstructure,” Journal of Cleaner Production, vol. 223, pp. 704–728, 2019.
[3] L. Scheinherrová, E. Vejmelková, M. Keppert, M. Doleželová, P. Rovnaníková, and R. Černý, “Effects of accelerated carbonation on properties of ceramic-based geopolymers,” Journal of Thermal Analysis and Calorimetry, vol. 145, no. 6, pp. 2951–2966, 2021.
[4] T. Bai, Z.-G. Song, Y.-G. Wu, X.-D. Hu, and H. Bai, “Influence of steel slag on the mechanical properties and curing time of metakaolin geopolymer,” Ceramics International, vol. 44, no. 13, pp. 15706–15713, 2018.
[5] V. V. Praveen Kumar, N. Prasad, and S. Dey, “Influence of metakaolin on strength and durability characteristics of ground granulated blast furnace slag based geopolymer concrete,” Structural Concrete, vol. 21, no. 3, pp. 1040–1050, 2020.
[6] P. Nuaklong, V. Sata, and P. Chindaprasirt, “Properties of metakaolin-high calcium fly ash geopolymer concrete containing recycled aggregate from crushed concrete specimens,” Construction and Building Materials, vol. 161, pp. 365–373, 2018.
[7] P. Zhang, Y. Zheng, K. Wang, and J. Zhang, “A review on properties of fresh and hardened geopolymer mortar,” Composites Part B: Engineering, vol. 152, pp. 79–95, 2018.
[8] F. Pacheco-Torgal, J. Castro-Gomes, and S. Jalali, “RETRACTED: Properties of tungsten mine waste geopolymeric binder,” Construction and Building Materials, vol. 22, no. 6, pp. 1201–1211, 2008.
[9] R. García, R. Vigil de la Villa, I. Vegas, M. Frías, and M. I. Sánchez de Rojas, “The pozzolanic properties of paper sludge waste,” Construction and Building Materials, vol. 22, no. 7, pp. 1484–1490, 2008.
[10] J. He, Y. Jie, J. Zhang, Y. Yu, and G. Zhang, “Synthesis and characterization of red mud and rice husk ash-based geopolymer composites,” Cement and Concrete Composites, vol. 37, pp. 108–118, 2013.
[11] A. M. Rashad and G. M. F. Essa, “Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature,” Cement and Concrete Composites, vol. 111, p. 103617, 2020.
[12] R. M. Senthamarai, P. D. Manoharan, and D. Gobinath, “Concrete made from ceramic industry waste: Durability properties,” Construction and Building Materials, vol. 25, no. 5, pp. 2413–2419, 2011.
[13] R. M. Senthamarai and P. Devadas Manoharan, “Concrete with ceramic waste aggregate,” Cement and Concrete Composites, vol. 27, no. 9, pp. 910–913, 2005.
[14] H. Higashiyama, K. Yamauchi, M. Sappakittipakorn, M. Sano, and O. Takahashi, “A visual investigation on chloride ingress into ceramic waste aggregate mortars having different water to cement ratios,” Construction and Building Materials, vol. 40, pp. 1021–1028, 2013.
[15] R. H. Geraldo, L. F. R. Fernandes, and G. Camarini, “Mechanical properties of porcelain waste alkali-activated mortar,” Open Ceramics, vol. 8, p. 100184, 2021.
[16] L. Zuda, P. Bayer, P. Rovnaník, and R. Černý, “Mechanical and hydric properties of alkali-activated aluminosilicate composite with electrical porcelain aggregates,” Cement and Concrete Composites, vol. 30, no. 4, pp. 266–273, 2008.
[17] A. S. El-Dieb and D. M. Kanaan, “Ceramic waste powder an alternative cement replacement–Characterization and evaluation,” Sustainable Materials and Technologies, vol. 17, p. e00063, 2018.
[18] G. A. Ramos, F. Pelisser, P. J. P. Gleize, A. M. Bernardin, and M. D. Michel, “Effect of porcelain tile polishing residue on geopolymer cement,” Journal of Cleaner Production, vol. 191, pp. 297–303, 2018.
[19] G. F. Huseien, A. R. M. Sam, K. W. Shah, J. Mirza, and M. M. Tahir, “Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing GBFS,” Construction and Building Materials, vol. 210, pp. 78–92, 2019.
[20] G. F. Huseien, A. R. M. Sam, J. Mirza, M. M. Tahir, M. A. Asaad, M. Ismail, and K. W. Shah, “Waste ceramic powder incorporated alkali activated mortars exposed to elevated Temperatures: Performance evaluation,” Construction and Building Materials, vol. 187, pp. 307–317, 2018.
[21] Z. Abdollahnejad, T. Luukkonen, M. Mastali, P. Kinnunen, and M. Illikainen, “Development of one-part alkali-activated ceramic/slag binders containing recycled ceramic aggregates,” Journal of Materials in Civil Engineering, vol. 31, no. 2, p. 4018386, 2019.
[22] M. Sarkar and K. Dana, “Partial replacement of metakaolin with red ceramic waste in geopolymer,” Ceramics International, no. September, 2020.
[23] Biritish standard, “BS 1881 part 116 : Method for determination of compressive strength of concrete cubes.” 1991.
[24] ASTM C 597-02, “Pulse Velocity Through Concrete,” United States: American Society for Testing and Material., vol. 4, no. 2, pp. 3–6, 2003.
[25] “ASTM C 496: Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken., pp. 2–6, 2004.
[26] NT Build 492, “Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments,” Measurement, pp. 1–8, 1999.
[27] ASTM C 642, “Standard Test Method for Density , Absorption , and Voids in Hardened Concrete 1,” no. 1, pp. 7–9, 2009.
[28] V. P. Kumar, A. Pradesh, and A. Pradesh, “Durability aspects of concrete by partial replacement of cement by ceramic waste,” International Journal of Civil Engineering and Technology (IJCIET), vol. 8, no. 4, pp. 22–30, 2017.
[29] Z. Zhang, J. L. Provis, H. Wang, F. Bullen, and A. Reid, “Quantitative kinetic and structural analysis of geopolymers. Part 2. Thermodynamics of sodium silicate activation of metakaolin,” Thermochimica Acta, vol. 565, pp. 163–171, 2013.
[30] P. Duxson, S. W. Mallicoat, and G. C. LukeyShow, “No TitleThe Effect of Alkali and Si/Al Ratio on the Development of Mechanical Properties of Metakaolin-Based Geopolymers,” Colloids and Surfaces A Physicochemical and Engineering Aspects, vol. 292, no. 1, pp. 8–20, 2007.
[31] N. Ain, L. Yun-ming, H. Cheng-yong, M. Mustafa, and A. Bakri, “Correlation between pore structure , compressive strength and thermal conductivity of porous metakaolin geopolymer,” Construction and Building Materials, vol. 247, p. 118641, 2020.