Investigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells

محورهای موضوعی : فصلنامه نانوساختارهای اپتوالکترونیکی

davood jalalian ¹ (Department of Electrical Engineering, Rasht Branch, Islamic Azad University, Rasht, Iran)
Abbas Ghadimi ² (Department of Electrical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran)
Azadeh Kiani Sarkaleh ³ (Department of Electrical Engineering, Rasht Branch, Islamic Azad University, Rasht, Iran)

تاریخ دریافت : 1399/02/13 تاریخ پذیرش : 1399/03/26 تاریخ انتشار : 1399/02/12

کلید واژه: Efficiency, Perovskite Solar Cell, Hole Transport Layer, HTM, Bandgap Offset,

چکیده مقاله :

Abstract: Perovskite solar cells have become an attractive subject in the solar energy
device area. During ten years of development, the energy conversion efficiency has been
improved from 2.2% to more than 22%, and it still has a very good potential for further
enhancement. In this paper, a numerical model of the perovskite solar cell with the
structure of glass/ FTO/ TiO2/ H3NH3PbI3/ HTM/Au by using Silvaco Atlas software is
presented. The effect of hole transport material characteristics, including hole mobility
and band gap offset of organic and inorganic HTM layers such as Spiro-MOeTAD, CuO
and Cu2O on the performance of PSCs are investigated. The simulation results reveal that
with increase of hole mobility in hole transport layer, the cell efficiency is increases.
Meanwhile, the solar cell exhibits a better performance by using inorganic materials like
CuO and Cu2O as hole transport layer, than by using Spiro-MOeTAD, particularly the
efficiency reaches 22.12% when Cu2O is used.

منابع و مأخذ:

REFERENCES
[1] A. K. Jena, Y. Numata, M. Ikegami, T. Miyasaka, Role of spiro-OMeTAD in performance deterioration of perovskite solar cells at high temperature and reuse of the perovskite films to avoid Pb-waste. J. Mater. Chem. A, 6 (2018, Winter) 2219-2230.
Available:https://pubs.rsc.org/en/content/articlelanding/2018/ta/c7ta07674f#!divAbstract
[2] C. Tseng, L. Chen, L. Chang, G. Wu, W. Feng, M. Jeng, D. W. Chen, K. Lee, Cu2O-HTM/SiO2-ETM assisted for synthesis engineering improving efficiency and stability with heterojunction planar perovskite thin-film solar cells, Sol. Energy, 204 (2020, Summer) 270-279.
Available:https://www.sciencedirect.com/science/article/pii/S0038092X20304618
[3] X. Miao, S. Wang, W. Sun, Y. Zhu, C. Du, R. Ma, C. Wang. Room-temperature electrochemical deposition of ultrathin CuOx flm as hole transport layer for perovskite solar cells. Scr. Mater. 165 (2019, Spring) 134–9.
76 * Journal of Optoelectronical Nanostructures Spring 2020 / Vol. 5, No. 2
Available:https://www.sciencedirect.com/science/article/pii/S1359646219301150
[4] Z. L. Tseng, L. C. Chen, C. H. Chiang, S. H. Chang, C. C. Chen, C. G. Wu, Efficient inverted-type perovskite solar cells using UV-ozone treated MoOx and WOx as hole transporting layers. Sol. Energy 139 (2016, Winter) 484–8.
Available:https://www.sciencedirect.com/science/article/abs/pii/S0038092X16304698
[5] W. Chen, F. Z. Liu, X. Y. Feng, B. D. Aleksandra, K. C. Wai, Z. B. He, Cesium doped NiOx as an effcient hole extraction layer for inverted planar perovskite solar cells. Adv. Energy Mater. 7 (2017, Summer) 1700722.
Available: https://onlinelibrary.wiley.com/doi/10.1002/aenm.201700722
[6] S. Abdelaziz, A. Zekry, A. Shaker, M. Abouelatta, Investigation the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation, Opt. Mater. 101 (2020, Spring)109738.
Available:https://www.sciencedirect.com/science/article/abs/pii/S0925346720300896
[7] M. S. Chowdhury, S. A. Shahahmadi, P. Chelavanathan, S. K. Tiong, N. Amin, K. Techato, N. Nuthammachot, T. Chowdhury, M. Suklueng, Effect of deep-level defect density of the absorber layer and n/i interface in perovskite solar cell by SCAPS-1D, Results Phys. 16 (2020, Spring) 102839.
Available:https://www.sciencedirect.com/science/article/pii/S2211379719321217
[8] A. Mirkamali, K.K. Muminov, Numerical simulation of CdS/CIGS tandem multi-junction solar cells with AMPS-1D, JOPN. 2(1) (2017, Winter) 31-40.
Available: http://jopn.miau.ac.ir/article_2198.html
[9] A. Hima, GPVDM simulation of layer thickness effect on power conversion efficiency of CH3NH3PbI3 based planar heterojunction solar cell, IJECA. 3 (1) (2018) 37–41.
Available: https://www.ijeca.info/index.php/IJECA/article/view/64
[10] I. Silvaco, Atlas User's Manual, (2016).
Available:https://dynamic.silvaco.com/dynamicweb/jsp/downloads/DownloadManualsAction.do?req=silen-manuals&nm=atlas
[11] K. Tan, P. Lin, G. Wang, Y. Liu, Z. Xu, Y. Lin, Controllable design of solid-state perovskite solar cells by SCAPS device simulation. Solid State Electron. 126 (2016, Winter) 75-80.
Investigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM … * 77
Available:https://www.sciencedirect.com/science/article/abs/pii/S0038110116301423
[12] G. A. Casas, M.A. Cappelletti, A. P. Cédola, B.M. Soucase, E. P. Blancل, Analysis of the power conversion efficiency of perovskite solar cells with different materials as Hole-Transport Layer by numerical simulations. Super lattice. Microst. 107 (2017, Summer) 136-143.
Available:https://www.sciencedirect.com/science/article/abs/pii/S0749603617303087
[13] D. Ompong, J. Singh, Charge carrier mobility dependent open-circuit voltage in organic and hybrid solar cells, Front. Nanosci. Nanotech. 2(1) (2015) 43-47.
Available: https://www.oatext.com/pdf/FNN-2-108.pdf