3D Printed Housing Architectural Design Principles
محورهای موضوعی : Built Environment
Milad Rezazadeh
1
,
Hamed Mazaherian
2
,
Mohammad Reza Matini
3
1 - Department of Architecture, School of Architecture, College of Fine Arts, University of Tehran, Tehran, Iran.
2 - Department of Architecture, School of Architecture, College of Fine Arts, University of Tehran, Tehran, Iran.
3 - Department of Architecture, School of Architecture, Art University of Iran, Tehran, Iran.
کلید واژه: Housing Construction, House 3D Printing, Digital Fabrication, Mass Customization, Architectural Design Criteria,
چکیده مقاله :
This article explores the design principles for building houses with 3D printers. This study provides an overview of the architectural principles needed to design houses using this technology. The absence of these foundations can cause unsuitable designed forms for this technology. The analysis in this research includes a wide range of relevant articles, and we have found many approaches to the architectural design of 3D-printed houses. This review addresses many aspects of materials, printer types, construction sites, structures, and architecture. The results of this research will help architects understand the dos and don'ts of designing these kinds of housing and raise awareness in the design phase. Moreover, it will prevent errors during construction.
In conclusion, constructing houses with 3D printers is the best for small one-story houses. Houses with hand-reinforced concrete and glass fibers in curved forms have a free plan designed by digital design. The point that must be added is that by combining structural systems with traditional roofs, we can add to the number of floors, allowing us to use more of this technology.
This article explores the design principles for building houses with 3D printers. This study provides an overview of the architectural principles needed to design houses using this technology. The absence of these foundations can cause unsuitable designed forms for this technology. The analysis in this research includes a wide range of relevant articles, and we have found many approaches to the architectural design of 3D-printed houses. This review addresses many aspects of materials, printer types, construction sites, structures, and architecture. The results of this research will help architects understand the dos and don'ts of designing these kinds of housing and raise awareness in the design phase. Moreover, it will prevent errors during construction.
In conclusion, constructing houses with 3D printers is the best for small one-story houses. Houses with hand-reinforced concrete and glass fibers in curved forms have a free plan designed by digital design. The point that must be added is that by combining structural systems with traditional roofs, we can add to the number of floors, allowing us to use more of this technology.
Aboelhassan, M. (2023). "Future of Sustainable Construction Industry: A Review of Research, Practice and Applications of 3D Concrete Printing." 5: 1-8.
Abouelela, A. S. and M. A. M. Ali (2021). "3D Printing Technologies as an Approach towards Designing Sustainable Affordable Housing Units." Design Engineering: 2292-2311.
Aghimien, D., C. Aigbavboa, L. Aghimien, W. D. Thwala and L. Ndlovu (2020). "Making a case for 3D printing for housing delivery in South Africa." International Journal of Housing Markets and Analysis.
Beyhan, F. and S. Arslan Selçuk (2018). 3D printing in architecture: One step closer to a sustainable built environment. Proceedings of 3rd International Sustainable Buildings Symposium (ISBS 2017) Volume 1 3, Springer.
Camacho, D. D., P. Clayton, W. J. O'Brien, C. Seepersad, M. Juenger, R. Ferron and S. Salamone (2018). "Applications of additive manufacturing in the construction industry–A forward-looking review." Automation in construction 89: 110-119.
Carletta, J. (1996). "Assessing agreement on classification tasks: the kappa statistic." arXiv preprint cmp-lg/9602004.
Davydenko, V. A. and N. A. Melyushchenko (2022). "INNOVATIVE CONSTRUCTION METHODS." Innovative technologies in construction and management of infrastructure technical state. Сборник научных трудов IV Всероссийской национальной научно-практической конференции.
El-Sayegh, S., L. Romdhane and S. Manjikian (2020). "A critical review of 3D printing in construction: Benefits, challenges, and risks." Archives of Civil and Mechanical Engineering 20: 1-25.
García-Alvarado, R., G. Moroni-Orellana and P. Banda-Pérez (2021). "Architectural evaluation of 3D-printed buildings." Buildings 11(6): 254.
García-Alvarado, R., G. Moroni-Orellana and P. Banda (2022). "Development of Variable Residential Buildings with 3D-Printed Walls." Buildings 12(11): 1796.
Hossain, M. A., A. Zhumabekova, S. C. Paul and J. R. Kim (2020). "A review of 3D printing in construction and its impact on the labor market." Sustainability 12(20): 8492.
Khajavi, S. H., M. Tetik, A. Mohite, A. Peltokorpi, M. Li, Y. Weng and J. Holmström (2021). "Additive manufacturing in the construction industry: The comparative competitiveness of 3D concrete printing." Applied Sciences 11(9): 3865.
Khoshnevis, B., D. Hwang, K.-T. Yao and Z. Yeh (2006). "Mega-scale fabrication by contour crafting." International Journal of Industrial and Systems Engineering 1(3): 301-320.
Nadarajah, N. (2018). "Development of concrete 3D printing."
Ngo, T. D., A. R. Kashani, G. Imbalzano, K. T. Q. Nguyen and D. Hui (2018). "Additive manufacturing (3D printing): A review of materials, methods, applications, and challenges." Composites Part B: Engineering.
Page, M. J., J. E. McKenzie, P. M. Bossuyt, I. Boutron, T. C. Hoffmann, C. D. Mulrow, L. Shamseer, J. M. Tetzlaff, E. A. Akl and S. E. Brennan (2021). "The PRISMA 2020 statement: an updated guideline for reporting systematic reviews." International journal of surgery 88: 105906.
Perkins, I. and M. Skitmore (2015). "Three-dimensional printing in the construction industry: A review." International Journal of Construction Management 15(1): 1-9.
Pooya, A. A., A. J. Chaghoushi, S. Shokohyar and M. Karimizand (2020). THE MODEL OF CHALLENGES OF SMART CONTRACT BASED ON BLOCKCHAIN TECHNOLOGY AND DISTRIBUTED LEDGER USING META-SYNTHESIS RESEARCH METHOD.
Puzatova, A., P. Shakor, V. Laghi and M. Dmitrieva (2022). "Large-scale 3D printing for construction application by means of robotic arm and Gantry 3D Printer: A Review." Buildings 12(11): 2023.
Sandelowski, M. and J. Barroso (2006). Handbook for synthesizing qualitative research, Springer Publishing Company.
Summary, E. (2019). World Urbanization Prospects: The 2018 Revision.
Tay, Y. W. D., B. Panda, S. C. Paul, N. A. Noor Mohamed, M. J. Tan and K. F. Leong (2017). "3D printing trends in building and construction industry: a review." Virtual and Physical Prototyping 12(3): 261-276.
Xu, W., S. Huang, D. Han, Z. Zhang, Y. Gao, P. Feng and D. Zhang (2022). "Toward automated construction: The design-to-printing workflow for a robotic in-situ 3D printed house." Case Studies in Construction Materials 17: e01442.
