Comparison of the effects of graphene and nanoclay nanosheets on crystalline structure of polyvinylidene fluoride
محورهای موضوعی : Nano materials and smart polymers
1 - پژوهشگاه پلیمر و پتروشیمی ایران
کلید واژه: PVDF, Cloisite 30B, graphene, surface free energy, morphology,
چکیده مقاله :
An extensive review of the literature showed that both graphene and Cloisite 30B nanosheets are widely employed to modify the crystalline structure and piezoelectic properties of polyvinylidene fluoride (PVDF). Due to the similarity in the geometry of these nanoparticles a comparative study is reported to find the stems of difference in their effects on crystalline structure of PVDF. Scanning electron microscopy (SEM) of these composites showed that large and wide graphene particles are dispersed in PVDF matrix whereas their thickness is well below 100 nanometers. Meanwhile, a careful inspection of SEM micrographs of Cloisite 30B loaded composites revealed existence of smaller particles with almost the same particles thicknesses. Both techniques of Fourier transform infrared (FT-IR) spectroscopy and wide angle X-ray diffraction (WXRD) witnessed changes in the crystalline structure of PVDF. The overall finding was that Cloisite 30B improves the polar beta phase of PVDF crystals, whereas a revers effect was found in the presence of graphene nanosheets. These observations were accounted for by differences in surface geometry and surface free energy (surface tension and interfacial tension). Based on the data available for surface properties of these two nanosheets it was found that surface properties of Cloisite 30B is very close to those of PVDF, whereas the surface properties of graphene are far from those of PVDF. Also a lower interfacial tension was found to be active in PVDF-Cloisite 30B system compared to that operative in PVDF-graphene system. An intimate interface along with proper surface texture led to higher content of PVDF’s beta crystals in case of Cloisite 30B nanocomposite.
An extensive review of the literature showed that both graphene and Cloisite 30B nanosheets are widely employed to modify the crystalline structure and piezoelectic properties of polyvinylidene fluoride (PVDF). Due to the similarity in the geometry of these nanoparticles a comparative study is reported to find the stems of difference in their effects on crystalline structure of PVDF. Scanning electron microscopy (SEM) of these composites showed that large and wide graphene particles are dispersed in PVDF matrix whereas their thickness is well below 100 nanometers. Meanwhile, a careful inspection of SEM micrographs of Cloisite 30B loaded composites revealed existence of smaller particles with almost the same particles thicknesses. Both techniques of Fourier transform infrared (FT-IR) spectroscopy and wide angle X-ray diffraction (WXRD) witnessed changes in the crystalline structure of PVDF. The overall finding was that Cloisite 30B improves the polar beta phase of PVDF crystals, whereas a revers effect was found in the presence of graphene nanosheets. These observations were accounted for by differences in surface geometry and surface free energy (surface tension and interfacial tension). Based on the data available for surface properties of these two nanosheets it was found that surface properties of Cloisite 30B is very close to those of PVDF, whereas the surface properties of graphene are far from those of PVDF. Also a lower interfacial tension was found to be active in PVDF-Cloisite 30B system compared to that operative in PVDF-graphene system. An intimate interface along with proper surface texture led to higher content of PVDF’s beta crystals in case of Cloisite 30B nanocomposite.
