Identification, Classification and Management of Industrial Hazardous Waste in Ardabil Province
محورهای موضوعی : Research paper
Mohsen Amirfazli
1
(Faculty of veterinery medicine)
Sasan Safarzadeh
2
(M.sc (civil- structural engineer), Saraviey University, Sari, Iran. Corresponding Author)
Reza Samadi Khadem
3
(Young Researchers and Elite Club, Ardabil Branch, Islamic Azad University, Ardabil, Iran)
کلید واژه: Classification, Environmental Management, Basel Convention, Industrial hazardous Wastes,
چکیده مقاله :
Abstract: Hazardous waste is generated by numerous industrial, commercial, agricultural and even domestic sources. The dangers of these wastes can vary depending on their types and environmental conditions and various short-term and long-term effects ranging from acute to chronic are expected. This study was carried out in regard to health and economic considerations and to create motivation for conducting studies to identify industrial hazardous waste which plays an important role in growing trend of country's industry. In this research, we selected 51 important industrial units of Ardebil province and data were collected through questionnaires, in-person interviews with the units’ authorities and referring to available documents. The information contained the types and amount of waste, temporary storage method, Discharge frequency, final disposal method, and the status of recycling and reuse. The results obtained from data analysis without considering uncontrolled industrial wastewater, show the annual production of Approximate 2,010,265 tons of waste; which about 1502 tons of this amount (according to available list in the Basel Convention), has classified under the title hazardous waste and about 12.42% of this type of waste was toxic. The share of liquid and solid physical states of the waste is respectively 59.87%, 13.77%. It should be noted that there is no temporary storage for about 20.29% of this waste. Reviewing the final disposal method indicates that about 28.66% of hazardous waste is discharged into the environment without any control.
Bagchi A., 2004, Design of landfill sand integrated solid waste management, 3rd edition, John Wiley & Song, New Jersey.; 10-145, 302-316.
Deputy human environment affairs, 2013, Technical guide for disposal of hazardous waste, Environmental Protection Agency.
Ehrampoosh, M.H., Farsad, M., Dehghni Tafti, A., Mozayan, M., 2005, A survey on the collection, transportation and disposal of industrial waste in the major industries of Yazd in 2003, proceedings of the 8th national conference on environmental health at Tehran university.
Fataei, E. Monavari, S. Shariat, S. Leghaei, H. Ojaghi, A., 2005, Management of collection, transportation and landfilling of Solid Waste in Sarein City, The Journal of Solid Waste Technology and Managent, Scopus,; 31, 229-224.
Freeman, H.M., 1998, Standard handbook of hazardous waste treatment and disposal, Sec- ond Edition. Mc Graw-Hill.
Muller, K. R., 1993, Chemical waste management, publications office of recycling and converting municipal property.
Regulation of Connecticut State Agencies, 2000, Checklist for solid waste disposal areas, section 22a-4306(b).
Salvato, J., Nemerow, N., Agardy, F., 2003, Environmental engineering, fifth edition, John Wily & Sons, Inc, New Jersey; 755-884.
