An experimental model for predicting normal solar performance chimneys concerning the percentage of openings
محورهای موضوعی : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیکSajede Nazari 1 , Malihe Taghipour 2 , Aliakbar Heidari 3
1 - Department of Architect, Shiraz Branch, Islamic Azad University, Shiraz, Iran
2 - Associate professor, Department of Architect, Shiraz Branch, Islamic Azad University, Shiraz, Iran
3 - Assistant professor in architecture, faculty member of technical and engineering department, Yasouj university, Yasouj, Iran
کلید واژه: CFD, Energy efficiency, Natural Ventilation, Solar Chimney, Empirical Model,
چکیده مقاله :
Despite the spread of science in all fields in today's world, human beings are always seeking new knowledge. Energy is one of the issues that human beings significantly think about its control and protection. Solar chimneys can go through a very valuable process in hot and dry climates by creating air conditioning. Thus, the study of factors affecting the optimization of the solar chimney is inevitable. Since there is airflow in the solar chimney, it can be important to study the number of openings that cause air to enter the building in the wall of the building envelope. In this research was done using the simulated environment method in Design Builder software and the CFD analysis. Thus, a result of 25% was obtained by examining five sample openings with different percentages in the wall, which was the most suitable option for the model in terms of economic and energy efficiencies.
[1] Lotfabadi, P. (2015). Analyzing passive solar strategies in the case of high-rise building. Renewable and Sustainable Energy Reviews, 52, 1340-1353.
[2] Shi, L., & Zhang, G. (2016). An empirical model to predict the performance of typical solar chimneys considering both room and cavity configurations. Building and environment, 103, 250-261.
[3] Nakielska, M., & Pawłowski, K. (2017). Increasing natural ventilation using solar chimney. In E3S Web of Conferences (Vol. 14, p. 01051). EDP Sciences.
[4] DeBlois, J., Bilec, M., & Schaefer, L. (2013). Simulating home cooling load reductions for a novel opaque roof solar chimney configuration. Applied Energy, 112, 142-151.
[5] Gontikaki, M., Trcka, M., Hensen, J., & Hoes, P. J. (2010). Optimization of a solar chimney design to enhance natural ventilation in a multi-storey office building.
[6] Li, K., Liu, C., Jiang, S., & Chen, Y. (2020). Review on hybrid geothermal and solar power systems. Journal of cleaner production, 250, 119481.
[7] Guo, P., Li, T., Xu, B., Xu, X., & Li, J. (2019). Questions and current understanding about solar chimney power plant: A review. Energy conversion and management, 182, 21-33.
[8] Shi, L., Zhang, G., Yang, W., Huang, D., Cheng, X., & Setunge, S. (2018). Determining the influencing factors on the performance of solar chimney in buildings. Renewable and Sustainable Energy Reviews, 88, 223-238.
[9] Kasaeian, A. B., Molana, S., Rahmani, K., & Wen, D. (2017). A review on solar chimney systems. Renewable and sustainable energy reviews, 67, 954-987.
[10] Monghasemi, N., & Vadiee, A. (2018). A review of solar chimney integrated systems for space heating and cooling application. Renewable and Sustainable Energy Reviews, 81, 2714-2730.
[11] Ghalamchi, M., Kasaeian, A., Ghalamchi, M., & Mirzahosseini, A. H. (2016). An experimental study on the thermal performance of a solar chimney with different dimensional parameters. Renewable Energy, 91, 477-483.
[12] Toghraie, D., Karami, A., Afrand, M., & Karimipour, A. (2018). Effects of geometric parameters on the performance of solar chimney power plants. Energy, 162, 1052-1061.
[13] Zha, X., Zhang, J., & Qin, M. (2017). Experimental and numerical studies of solar chimney for ventilation in low energy buildings. Procedia Engineering, 205, 1612-1619.
[14] Al Touma, A., Ghali, K., Ghaddar, N., & Ismail, N. (2016). Solar chimney integrated with passive evaporative cooler applied on glazing surfaces. Energy, 115, 169-179.
[15] Asayesh, M., Kasaeian, A., & Ataei, A. (2017). Optimization of a combined solar chimney for desalination and power generation. Energy Conversion and Management, 150, 72-80.
[16] Zhang, T., Tan, Y., Yang, H., & Zhang, X. (2016). The application of air layers in building envelopes: A review. Applied energy, 165, 707-734.
[17] Dehghani-sanij, A. R., Soltani, M., & Raahemifar, K. (2015). A new design of wind tower for passive ventilation in buildings to reduce energy consumption in windy regions. Renewable and Sustainable Energy Reviews, 42, 182-195.
[18] Hu, S., Leung, D. Y., Chen, M. Z., & Chan, J. C. (2016). Effect of guide wall on the potential of a solar chimney power plant. Renewable energy, 96, 209-219.
[19] Ghalamchi, M., Kasaeian, A., & Ghalamchi, M. (2015). Experimental study of geometrical and climate effects on the performance of a small solar chimney. Renewable and Sustainable Energy Reviews, 43, 425-431.
[20] Jing, H., Chen, Z., & Li, A. (2015). Experimental study of the prediction of the ventilation flow rate through solar chimney with large gap-to-height ratios. Building and Environment, 89, 150-159.
[21] Sharifi, Seyed Maryam, Bastani, Alireza, (2015), Ecotourism zoning models using fuzzy (Case study: township of Shiraz), https://www.magiran.com/paper/1444683
[22] Gupta, D., & Khare, V. R. (2021). Natural ventilation design: predicted and measured performance of a hostel building in composite climate of India. Energy and Built Environment, 2(1), 82-93.
