Robust PID Optimized Load-Frequency Controller of a Two-Area Power System Considering Systems Uncertainties
محورهای موضوعی : Power
Ali Naderi Saatlo
1
,
Maryam Ashoory
2
1 - Department of Electrical-Electronics Engineering, Urmia Branch, Islamic Azad University, Urmia, Iran
2 - Department of Electrical-Electronics Engineering, Urmia Branch, Islamic Azad University, Urmia, Iran
کلید واژه: Load Frequency Control, PID Controller, PSO algorithm,
چکیده مقاله :
The Load Frequency Control (LFC) has been a major subject in electric power system and is be-coming more significant system in recent decades. This paper targets to investigate the problem of LFC in interconnected power systems in order to obtain robust state. In this paper, a design method for a robust controller, based on PID, has been presented to overcome the robustness against uncertainties. To achieve optimal PID, Particle Swarm Optimization (PSO) has been em-ployed to obtain coefficients of the SMC. Variations of uncertain parameters are considered be-tween -40% and +40% of nominal values. The simulation results show that the system response with the proposed PID is better than the conventional PID controller. It is also shown that the transient response of the tie line power can be improved.
The Load Frequency Control (LFC) has been a major subject in electric power system and is be-coming more significant system in recent decades. This paper targets to investigate the problem of LFC in interconnected power systems in order to obtain robust state. In this paper, a design method for a robust controller, based on PID, has been presented to overcome the robustness against uncertainties. To achieve optimal PID, Particle Swarm Optimization (PSO) has been em-ployed to obtain coefficients of the SMC. Variations of uncertain parameters are considered be-tween -40% and +40% of nominal values. The simulation results show that the system response with the proposed PID is better than the conventional PID controller. It is also shown that the transient response of the tie line power can be improved.
