Effect of the Physical Properties of Composite Packaging Materials on Keeping Quality of Smoked Catfish

محورهای موضوعی : Agricultural Extension

Olayemi, Foline Folorunsho ¹ (Engineering unit, Nigerian Stored Products Research Institute, Kano, Nigeria.)
Raji, Abdulganiy Olayinka ² (Dept. of Agricultural and Environmental Engineering, University of Ibadan, Ibadan)
Bamishaiye, Eunice Iyabo ³ (Chemistry Unit, Nigerian Stored Products Research Institute, Kano, Nigeria.)

تاریخ دریافت : 1394/10/04 تاریخ پذیرش : 1394/10/04 تاریخ انتشار : 1390/06/10

کلید واژه: catfish, Packaging material, absorption rate, Thickness, engineering properties,

چکیده مقاله :

Six different composite packaging materials were tested with the trades’ practice of polythene bags in storing smoked catfish for a period of six months. The thickness of the packaging materials ranges from 0.23 to 046 mm with water and oil absorption rates of the packaging materials varies from 0.23 to 10.00 and 0.28 to 10.857 glcm2/mm respectively. The impact resistance weight also varies from 25 to 50 gm. It was observed that the physical properties of the packaging materials are related to the keeping quality of the stored catfish. The two packaging with better engineering properties offered better barrier functionality that gave better keeping quality for the catfish. [O, Foline Folorunsho et al. Effect of the Physical Properties of Composite Packaging Materials on Keeping Quality of Smoked Catfish. International Journal of Agricultural Science, Research and Technology, 2011; 1(3):127-131].

منابع و مأخذ:

1. Beatty, S. A and Fougere, H. (1957). The Processing of Dried Salted Fish. Fisheries Resource Board of Canada Bulletin No. 12. Halifax, Canada: Fisheries Resource Board of Canada.

2. Berhimpon, S., Souness, R. A., Buckle, K. A and Edwards, R. A. (1991). Salting and drying of yellowtail (Trachurus mccullochi Nichols). International Journal of Food Science and Technology, 25: 409–419.

3. Brown, C and Forel, M. (2008). Standard level chemistry developed specifically for the IB diploma Heinenann Baccalaureate.

4. Emblem A. and Enblem H. (1996) (eds) fundamentals of packaging Technology. Meltron Mowbraw. The Institute of Packaging.

5. Enenwaji H. M. G. (1977). Problem of fish handling, Preservation and storage in Nigeria. University of Nigeria Library. Proceedings of the Anambra State Minister of Agriculture, Awka and UNDP sponsored workshop held at Inoma and Enugwa – Ota, From Jane 13 – 17, 1977 for women in Fish Handling, Processing, Preservation, Storage and marketing.

6. Namsai, S., Keokamnerd, T., Kornpaka A and Warasawas, P. (2008). Effect of packaging system on shelf life stability of Thai – style fried ricl crackers. Asian Journal of Food and Agro – Industry. 1 (2): 78-86.

7. Okonkwo T. M., Obanu Z. A. and Ogbonna I. (1991). Rapid appraisal of smoked meat production problems in Nigeria: a case study of Tao kara smoked meat production centre, Tarkare keffi L. G. A. Paper presented at Rapid Rural Appraisal case study workshop, Dakar Senegal February 6 – 8, 1991.

8. Paine F. and Paine Y. (1983). A Handbook of food packaged London Blackie: London.

9. Tice, P. (2003). Packaging materials for polyethylene for food packaging applications. International life service institute Report website: http://ongg.ilsi.org/ file /PM 4 – Polythylene. pdf accessed 03/28/08.