List of Articles stainless steel 304

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - A study of the corrosion of stainless steel 304L coated with a 190 nm-thick manganese layer and annealed with nitrogen flux in a 0.4-mole solution of H2SO4 at different temperatures
  Farzaneh Modiri Hadi Savaloni
  10.1007/s40094-019-00345-5
  Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Anti-corrosion properties of stainless steel 304L coated with Mn-based thin film and annealed with nitrogen flux exposed to saline solution under various temperatures
  Farzaneh Modiri Hadi Savaloni
  10.1007/s40094-020-00381-6
  Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Growth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method
  Z. Haghparast F. Bisepar S. A. Khorrami Sh. Moradi H. Aghaie
  Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Simulation of clearance effect on LDR in stainless steel deep drawing
  Ali Fathi Jokandan Mehrdad Ozve Aminian
  Deep drawing is one of the most important processes in the sheet metal forming industry where a flat sheet is drawn by the punch into the hole matrix And It takes the shape of the punch. The effective parameter in this process  is clearance between punch and matrix More

  Deep drawing is one of the most important processes in the sheet metal forming industry where a flat sheet is drawn by the punch into the hole matrix And It takes the shape of the punch. The effective parameter in this process  is clearance between punch and matrix. Finite element method is a useful tool for the study of process and impact parameters affecting it. In this project the effect of clearance between punch and matrix on LDR was considered and result are showed 0.9 mm clearance is more optimum suitable for 0.6 mm sheet thickness in deep drawing and decreased to 0.66 mm clearance the LDR was decreased. Manuscript profile