List of Articles nickel-based super alloy

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Thermal shock behavior of thermal barrier coatings YSZ, YSZ/mullite and gradient coating YSZ/mullite on nickel base superalloy prepared by plasma spray (APS) method
  Nader Soltani iman mobasherpour Esmail Salahi Ali Sedaghat Ahangary
  In this research, thermal shock behavior, three types of yttria-stabilized zirconia (YSZ), yttria-stabilized zirconia and mullite coating (YSZ/Mullite) and gradient coating of yttria-stabilized zirconia and mullite (YSZ/Mullite) thermal barrier coatings on Inconel 738 l More

  In this research, thermal shock behavior, three types of yttria-stabilized zirconia (YSZ), yttria-stabilized zirconia and mullite coating (YSZ/Mullite) and gradient coating of yttria-stabilized zirconia and mullite (YSZ/Mullite) thermal barrier coatings on Inconel 738 low carbon nickel base superalloy along with bond coated by plasma spray method was compared.Using scanning electron microscopy (SEM) and X-ray diffraction (XRD), microstructure and phase analysis were done. The percentage of porosity and thermal shock of coatings at 1100°C temperature was investigated and compared. The results showed that with the increase of mullite in layer and gradient on YSZ coatings, the number of holes and porosity decreases, which is due to the increase in the amount of melted mullite particles. The percentage of porosity related to layer and gradient coating of mullite was obtained as 8 and 3.5% respectively. Using the results of the thermal shock test, it was determined that the lifetime of the mullite layer coating is longer than the mullite gradient coating and the YSZ coating. The maximum lifespan of the layered coating of mullite was recorded as 70 cycles of 10 minutes in a furnace with a temperature of 1100°C. The gradient coatings of mullite showed a higher percentage of shrinkage in thermal shock than the layered mullite coating. Manuscript profile