List of Articles نرم‌افزار دیزاین بیلدر

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Investigating the Effect of Different Energy Saving Strategies on Energy Rating of Building by Design Builder Software (Case Study: Office Building)
  Afshin Fathalian Hadi Kargarsharif
  10.22034/jest.2019.42973.4590
  Background and Objective: Reducing fossil energy resources, the environmental impact of high energy consumption and increasing the energy consumption in the building section, has increased the importance of attention to building energy consumption in the country. Provid More

  Background and Objective: Reducing fossil energy resources, the environmental impact of high energy consumption and increasing the energy consumption in the building section, has increased the importance of attention to building energy consumption in the country. Providing the standard of building energy consumption in our country is one of the important activities in this regard. This study aimed to determine the effect of different strategies to reduce energy consumption in the energy classification of office buildings as a case study by Design Builder software. Method: In this study, the total energy consumption of of an office building in Semnan climate was simulated by Design Builder software and the results obtained by the software, with the actual energy consumption of the building in 2016, which was obtained from the energy bills (electricity and gas) of the building, were validated. Then, using the energy rating of building, different strategies for reducing energy consumption were simulated and compared with the existing situation. Findings: Using energy simulation software, various energy efficiency strategies such as using external horizontal shading and removing internal shading, replacing windows with low-emitting double-glazed windows instead of single-glass windows and installing a thermal insulation in the external wall of the building were investigated that 15.2, 18.4 and 8.2% reduction in energy consumption achived compared to normal case, respectively. Then, the intensity of building energy consumption for each of the proposed strategies were calculated and the energy rating was determined for each. Discussion and Conclusion: The results showed that the replacement of external shading instead of internal shading had the least amount of savings and had no effect on the change in energy rating and the use of a combination of double glazing instead of single-walled and thermal insulation in the outer wall of the building while upgrading to the classification, the optimal suggested mode. Finally, the results of this study showed that in the case of accurate simulation of existing buildings and then validation the effects of different strategies on energy rating and consumption can be predicted accurately. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Energy simulation of office building with current materials in Semnan climate
  afshin fathalian Hadi Kargar Sharifabad
  One of modern world challenges is saving energy consumption. Multiple increase in energy price on one hand and limitation of fossil fuel as well as its consequent bio environmental pollution on the other hand have shown the necessity of sensible energy application. Mean More

  One of modern world challenges is saving energy consumption. Multiple increase in energy price on one hand and limitation of fossil fuel as well as its consequent bio environmental pollution on the other hand have shown the necessity of sensible energy application. Meanwhile energy consumption in construction sector is so high that saving even as little as possible in this section will have significant effect on efficiency rate of no renewable sources. Considering multiple relevant parameters in energy consumption with no application of simulating tools cannot permit reasonable decisions on designing building parts. In this research the proportion of annual energy consumption of office building located in Semnan city climate with application of design builder software has been simulated. Accuracy of results from simulation has been validated with recorded numbers at annual electricity and gas bills at the building. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Investigation of the effect of roof insulation and double wall effect on the energy consumption of office building in Garmsar city with design-builder software
  Mehdi Shahhoseini Hadi Kargar Sharifabad
  In today's world, the national security of most countries has depended on secure energy access, and therefore the optimum use of it has been the focus of attention of many statesmen and researchers. Expansion of consumption in the household sector and waste of energy in More

  In today's world, the national security of most countries has depended on secure energy access, and therefore the optimum use of it has been the focus of attention of many statesmen and researchers. Expansion of consumption in the household sector and waste of energy in the urban community are among the obvious reasons for the rapid growth of energy consumption in the national economy. For this reason, energy consumption in the building sector needs to be considered. In this paper, after simulating an office building in Garmsar City with Design-Builder Software and validating it, the effect of the roof insulation and double wall parameters on the energy consumption has been investigated. The results show that the roof insulation and the use of a double wall can have a significant impact on building energy consumption. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Building office energy modelling in Garmsar with designbuilder and study the impact of different solutions in energy optimization
  Mehdi Shahhoseini Hadi Kargar Sharifabad
  The contribution of the building sector to the energy consumption of countries is significant, so in the last few decades, in most industrialized countries, basic measures have been taken to reform the consumption model , using various tools including regulations and cr More

  The contribution of the building sector to the energy consumption of countries is significant, so in the last few decades, in most industrialized countries, basic measures have been taken to reform the consumption model , using various tools including regulations and criteria . In this study, the use of the type of material used in the walls of the city buildings in the Garmsar city building was analyzed. The comparison of the heat transfer coefficient of each material used on the external walls of the building is modeled and the building is evaluated with basic materials according to the climatic conditions of the city. Finally, using new materials in the outer wall and ceiling, building with double wall is a priority in reducing energy consumption. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Investigating the effect of replacing a double glass window with snigle window in an office building in the Semnan climate with Designbuilder software
  afshin fathalian Hadi Kargar Sharifabad
  The main cause of the energy dissipation in buildings in the country, in addition to design style of employment in the town of Bad materials in different parts of the building. It can be simple solutions to the implementation of some of the loss of a significant amount More

  The main cause of the energy dissipation in buildings in the country, in addition to design style of employment in the town of Bad materials in different parts of the building. It can be simple solutions to the implementation of some of the loss of a significant amount of renewable energy. In this study , optimize energy consumption in an administrative building in Semnan province climate in a bid to replace the window glass - with the designated low dispatch in foreign wall instead of single - walled window with the situation by simulator design builder software was investigated. Results of energy - saving by 12 percent annually in the coolant load, 2 percent in heating load and 11 percent of the total sample building in loads. Manuscript profile