Impact of Nanoclay on Mechanical Properties and Thermal Stability of Flexible PVC Nanocomposites for Using in Coating Oil and Gas Pipes
Subject Areas :
M. Kiani
1
,
V. Parvaneh
2
,
M. Abbasi
3
,
A. Dadrasi
4
1 - Department of Mechanical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran
2 - Department of Mechanical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran
3 - Department of Mechanical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran
4 - Department of Mechanical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran
Received: 2023-07-03
Accepted : 2023-07-03
Published : 2023-06-22
Keywords:
References:
S. Rahman, V. Mathur, R. Asmatulu, Composite Structures, 187, 2018, 481.
Hassani Niaki, A. Fereidoon, M. Ghorbanzadeh Ahangari, Composite Structures, 191, 2018, 231.
H. Othman, M.C. Ismail, M. Mustapha, N. Sallih, K.E. Kee, R.A. Jaal, Progress in Organic Coatings, 135, 2019, 82.
Nawaz, N. Yusuf, S. Habib, R.A. Shakoor, F. Ubaid, Z. Ahmad, R. Kahraman, S. Mansour, W. Gao, Polymers, 11, 2019, 852.
Yasir, F. Ahmad, P.S. Yusoff, S. Ullah, M. Jimenez, Surface Engineering, 36, 2020, 334.
Leszczynska, J. Njuguna, K. Pielichowski, J.R. Banerjee, Thermochimica Acta, 453, 2007, 75.
Leszczynska, J. Njuguna, K. Pielichowski, J.R. Banerjee, Thermochimica Acta, 454, 2007, 1.
S. Ray, M. Okamoto, Progress in Polymer Science, 28, 2003, 1539.
E. Wilkes, J.W. Summers, C. Daniels, “PVC Handbook”, Cincinnati, MU: Hanser Publications, 2005.
T.D. Stark, H. Choi, P.W. Diebel, Geotechnical Special Publications, 23, 2005, 28.
Pagacz, K. Pielichowski, Journal of Vinyl and Additive Technology, 15, 2009, 61.
S. Nazir, M.H.M. Kassim, L. Mohapatra, M.A. Gilani, M.R. Raza, K. Majeed, Nanoclay Reinforced Polymer Composites, 11, 2016, 35.
Uddin, Current Topics in the Utilization of Clay in Industrial and Medical Applications, 1, 2018, 3.
Ren, Y. Huang, Y. Liu, X. Tang, Polymer Testing, 24, 2005, 316.
Benderly, F. Osorio, W. Ijdo, Journal of Vinyl and Additive Technology, 14, 2008, 155.
F. Grossman, “Handbook of Vinyl Formulating”, Hoboken, NJ: John Wiley & Sons, 2008.
Wang, D. Parlow, Q. Yao, C.A. Wilkie, Journal of Vinyl and Additive Technology, 7, 2001, 203.
Rani, M.B. Ahamed, K. Deshmukh, Polymer Testing, 91, 2020, 106744.
Izadpanah, M. Rezaei, S. Talebi, Journal of Thermoplastic Composite Materials, 45, 2019, 1
S. Rad, E. Aali, S. Hallajian, D. Zangeneh, M. Tavakoli, K. Ayub, M. Peyravi, Journal of Macromolecular Science Part A: Pure and Applied Chemistry, 57, 2020, 123.
Barghamadi, M. Karrabi, M.H. Ghoreishy, S. Mohammadian Gezaz, Journal of Applied Polymer Science, 136, 2018, 47550.
Kalendova, J. Zykova, L. Kovarova, M. Slouf, J.F. Gerard, AIP Conference Proceedings, 1255, 2010, 181.
M. Matuana, Journal of Vinyl and Additive Technology, 15, 2009, 77.
Bohn, P.S. Balzer, D. Becker, Journal of Vinyl and Additive Technology, 24, 2018, 172.
Kroushl, "Resin Selection for PVC Applications in Handbook of Vinyl Formulating", NJ: John Wiley & Sons, 2008.
Gong, M. Feng, C. Zhao, S. Zhang, M. Yang, Polymer Degradation and Stability, 84, 2004, 289.
Pagacz, K. Pielichowski, Journal of Thermal Analysis and Calorimetry, 111, 2013, 1571.
Zhu, G.G. Bounocore, M. Lavorgna, L. Ambrosio, Polymer Composites, 32, 2011, 519.
M. Kaseem, Z.U. Rehman, Materials, 12, 2019, 3659.
_||_
S. Rahman, V. Mathur, R. Asmatulu, Composite Structures, 187, 2018, 481.
Hassani Niaki, A. Fereidoon, M. Ghorbanzadeh Ahangari, Composite Structures, 191, 2018, 231.
H. Othman, M.C. Ismail, M. Mustapha, N. Sallih, K.E. Kee, R.A. Jaal, Progress in Organic Coatings, 135, 2019, 82.
Nawaz, N. Yusuf, S. Habib, R.A. Shakoor, F. Ubaid, Z. Ahmad, R. Kahraman, S. Mansour, W. Gao, Polymers, 11, 2019, 852.
Yasir, F. Ahmad, P.S. Yusoff, S. Ullah, M. Jimenez, Surface Engineering, 36, 2020, 334.
Leszczynska, J. Njuguna, K. Pielichowski, J.R. Banerjee, Thermochimica Acta, 453, 2007, 75.
Leszczynska, J. Njuguna, K. Pielichowski, J.R. Banerjee, Thermochimica Acta, 454, 2007, 1.
S. Ray, M. Okamoto, Progress in Polymer Science, 28, 2003, 1539.
E. Wilkes, J.W. Summers, C. Daniels, “PVC Handbook”, Cincinnati, MU: Hanser Publications, 2005.
T.D. Stark, H. Choi, P.W. Diebel, Geotechnical Special Publications, 23, 2005, 28.
Pagacz, K. Pielichowski, Journal of Vinyl and Additive Technology, 15, 2009, 61.
S. Nazir, M.H.M. Kassim, L. Mohapatra, M.A. Gilani, M.R. Raza, K. Majeed, Nanoclay Reinforced Polymer Composites, 11, 2016, 35.
Uddin, Current Topics in the Utilization of Clay in Industrial and Medical Applications, 1, 2018, 3.
Ren, Y. Huang, Y. Liu, X. Tang, Polymer Testing, 24, 2005, 316.
Benderly, F. Osorio, W. Ijdo, Journal of Vinyl and Additive Technology, 14, 2008, 155.
F. Grossman, “Handbook of Vinyl Formulating”, Hoboken, NJ: John Wiley & Sons, 2008.
Wang, D. Parlow, Q. Yao, C.A. Wilkie, Journal of Vinyl and Additive Technology, 7, 2001, 203.
Rani, M.B. Ahamed, K. Deshmukh, Polymer Testing, 91, 2020, 106744.
Izadpanah, M. Rezaei, S. Talebi, Journal of Thermoplastic Composite Materials, 45, 2019, 1
S. Rad, E. Aali, S. Hallajian, D. Zangeneh, M. Tavakoli, K. Ayub, M. Peyravi, Journal of Macromolecular Science Part A: Pure and Applied Chemistry, 57, 2020, 123.
Barghamadi, M. Karrabi, M.H. Ghoreishy, S. Mohammadian Gezaz, Journal of Applied Polymer Science, 136, 2018, 47550.
Kalendova, J. Zykova, L. Kovarova, M. Slouf, J.F. Gerard, AIP Conference Proceedings, 1255, 2010, 181.
M. Matuana, Journal of Vinyl and Additive Technology, 15, 2009, 77.
Bohn, P.S. Balzer, D. Becker, Journal of Vinyl and Additive Technology, 24, 2018, 172.
Kroushl, "Resin Selection for PVC Applications in Handbook of Vinyl Formulating", NJ: John Wiley & Sons, 2008.
Gong, M. Feng, C. Zhao, S. Zhang, M. Yang, Polymer Degradation and Stability, 84, 2004, 289.
Pagacz, K. Pielichowski, Journal of Thermal Analysis and Calorimetry, 111, 2013, 1571.
Zhu, G.G. Bounocore, M. Lavorgna, L. Ambrosio, Polymer Composites, 32, 2011, 519.
M. Kaseem, Z.U. Rehman, Materials, 12, 2019, 3659.
